EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 31999R1547

Commission Regulation (EC) No 1547/1999 of 12 July 1999 determining the control procedures under Council Regulation (EEC) No 259/93 to apply to shipments of certain types of waste to certain countries to which OECD Decision C(92)39 final does not apply (Text with EEA relevance)

OJ L 185, 17.7.1999, p. 1–33 (ES, DA, DE, EL, EN, FR, IT, NL, PT, FI, SV)

This document has been published in a special edition(s) (CS, ET, LV, LT, HU, MT, PL, SK, SL, BG, RO)

Legal status of the document No longer in force, Date of end of validity: 09/07/2007; Repealed by 32007R0801

ELI: http://data.europa.eu/eli/reg/1999/1547/oj

31999R1547

Commission Regulation (EC) No 1547/1999 of 12 July 1999 determining the control procedures under Council Regulation (EEC) No 259/93 to apply to shipments of certain types of waste to certain countries to which OECD Decision C(92)39 final does not apply (Text with EEA relevance)

Official Journal L 185 , 17/07/1999 P. 0001 - 0033


COMMISSION REGULATION (EC) No 1547/1999

of 12 July 1999

determining the control procedures under Council Regulation (EEC) No 259/93 to apply to shipments of certain types of waste to certain countries to which OECD Decision C(92)39 final does not apply

(Text with EEA relevance)

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Council Regulation (EEC) No 259/93 of 1 February 1993 on supervision and control of application shipments of waste within, into and out of the European Community(1), as last amended by Commission Regulation (EC) No 2408/98(2), and in particular Article 17(3) thereof,

After consultation of the countries of destination concerned,

(1) Whereas Article 1(3)(a) of Council Regulation (EEC) No 259/93 excludes from its scope of application shipments of waste destined for recovery only and listed in Annex II to the same Regulation, as that Annex has been amended by Commission Decision 98/368/EC(3), except as provided for by, inter alia, Articles 17(1), (2) and (3);

(2) Whereas in accordance with Article 17(1) of Regulation (EEC) No 259/93 the Commission has notified to every country to which OECD Council Decision C(92) 39 Final of 30 March 1992 concerning the control of transfrontier movements of waste destined for recovery operations does not apply the list of waste included in Annex II to the said Regulation; whereas the Commission has requested confirmed that such waste is not subject to control in the country of destination, or has asked that such countries indicate whether the waste should be subject to the control procedures which apply to Annex III or IV to the said Regulation, or to the procedure laid down in Article 15 thereof;

(3) Whereas certain countries indicated that such waste should be subject to one of these control procedures; whereas the Commission, acting pursuant to the provisions of Article 17(3) of Regulation (EEC) No 259/93, adopted Decision 94/575/EC of 20 July 1994 determining the control procedure under Council Regulation (EEC) No 259/93 as regards certain shipments of waste to certain non-OECD countries(4);

(4) Whereas some OECD countries still do not apply OECD Decision C(92) 39 Final, but may do so in the future;

(5) Whereas certain further third countries have also indicated that one of the control procedures provided for in Regulation (EEC) No 259/93 should be applied;

(6) Whereas the Commission has notified the requests of these third countries to the Committee established pursuant to Article 18 of Council Directive 75/442/EEC of 15 July 1975 on waste(5), as last amended by Commission Decision 96/350/EC(6);

(7) Whereas in accordance with Article 17(3) of Regulation (EEC) No 259/93 where such waste is subject to control in the country of destination, or upon request of such a country, exports of such waste to that country are to be subjected to control;

(8) Whereas it is appropriate to update and bring together all of these export arrangements in respect of the above countries in a single text, and, in the interests of clarity and legal certainty, to list those categories of waste which are not subject to control procedures; whereas Decision 94/575/EC should therefore be repealed;

(9) Whereas with regard to shipments to ACP States, Article 39 of the Fourth ACP-EC Convention, signed at Lomé on 15 December 1989(7), prohibits export to those countries of Hazardous wastes listed in Annexes I and II to the Basel Convention on the Control of transboundary Movements of Hazardous Wastes and their Disposal, which was concluded on behalf of the Community by Council Decision 93/98/EEC(8); whereas, furthermore, certain items of such waste may be found in Annex II to Regulation (EEC) No 259/93; whereas, in those circumstances and in order to comply with the Community's international obligations, it must be made clear that such shipments of such items to ACP countries are prohibited,

HAS ADOPTED THIS REGULATION:

Article 1

1. The control procedure applicable to wastes listed in Annex III to Regulation (EEC) No 259/93 shall apply to exports to the countries listed in Annex A to this Regulation in respect of those categories of waste listed in Annex II to Regulation (EEC) No 259/93 which are also set out in Annex A.

2. The control procedure applicable to wastes listed in Annex IV to Regulation (EEC) No 259/93 shall apply to exports to the countries listed in Annex B to this Regulation in respect of those categories of waste listed in Annex II to Regulation (EEC) No 259/93 which are also set out in Annex B.

3. The control procedure laid down in Article 15 to Regulation (EEC) No 259/93 shall apply to exports to the countries listed in Annex C to this Regulation in respect of those categories of waste listed in Annex II to Regulation (EEC) No 259/93 which are also set out in Annex C.

4. Without prejudice to points (b) to (e) of Article 1(3) of Regulation (EEC) No 259/93, or to Article 11 thereof, no control procedure shall apply to exports to the countries listed in Annex D to this Regulation in respect of those categories of waste listed in Annex II to Regulation (EEC) No 259/93 which are also set out in Annex D.

5. Once an OECD country which is listed in Annex A, B and/or C and to which OECD Decision C(92) 39 Final does not apply at the time of entry into force of this Regulation, implements that OECD Decision, this Regulation shall no longer apply to that country.

Article 2

The provisions of Article 1 shall be without prejudice to the prohibitions set out in the Fourth ACP-EC Convention as regards shipments of waste to ACP countries.

Article 3

Decision 94/575/EC is hereby repealed.

Article 4

This Regulation shall enter into force on the thirtieth day following that of its publication in the Official Journal of the European Communities.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 12 July 1999.

For the Commission

Leon BRITTAN

Member of the Commission

(1) OJ L 30, 6.2.1993, p. 1.

(2) OJ L 298, 7.11.1998, p. 19.

(3) OJ L 165, 10.6.1998, p. 20.

(4) OJ L 220, 25.8.1994, p. 15.

(5) OJ L 194, 25.7.1975, p. 39.

(6) OJ L 135, 6.6.1996, p. 32.

(7) OJ L 229, 17.8.1991, p. 3.

(8) OJ L 39, 16.2.1993, p. 1.

ANNEX A

Countries to which shipments of certain categories of waste listed in Annex II (the "green" list) of Regulation (EEC) No 259/93, should be carried out under the control procedure applying to waste listed in Annex III (the "amber" list) to the same Regulation are set out below. The categories of waste listed in Annex II which are covered are also given.

BULGARIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non dispersible(1) form")

(a) The following waste and scrap of precious metals and their alloys:

>TABLE>

NB.

Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams.

(b) The following ferrous waste and scrap of iron or steel:

>TABLE>

(c) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In sectin GB ("Metal bearing wastes arising from melting, smelting and refining of metals")

>TABLE>

3. In section GC ("Other wastes containing metals")

>TABLE>

4. In section GH ("Solid plastic wastes")

>TABLE>

CYPRUS

All types in Annex II except those listed in Annex D.

HUNGARY(2)

All types in Annex II except those listed in Annex B.

INDONESIA

In section GA ("Metal and metal-alloy waste in metallic, non-dispersible(3) form")

(a) The following ferrous waste and scrap of iron or steel:

>TABLE>

(b) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

JAMAICA

1. All types included in section GA ("Metal and metal-alloy waste in metallic, non dispersible(4) form").

2. All types included in section GB ("Metal bearing wastes arising from melting, smelting and refining of metals").

3. All types included in section GD ("Wastes from mining operations: these wastes to be in non-dispersible form").

4. All types included in section GE ("Glass waste in non-dispersible form").

5. All types included in section GF ("Ceramic waste in non-dispersible form").

6. All types included in section GI ("Paper, paperboard and paper product wastes").

7. All types included in section GJ ("Textile wastes").

8. All types included in section GL ("Untreated cork and wood wastes").

MACAU

All types in Annex II.

POLAND(5)

All types in Annex II.

SINGAPORE

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(6) form")

(a) The following waste and scrap of precious metals and their alloys:

>TABLE>

NB.

Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams.

(b) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GC ("Other wastes containing metals")

>TABLE>

3. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form")

>TABLE>

THAILAND:

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(7) form")

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. All types in section GB ("Metal bearing wastes arising from melting, smelting and refining of metals").

3. In section GC ("Other wastes containing metals")

>TABLE>

4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form")

>TABLE>

5. All types in section GE ("Glass waste in non-dispersible form").

6. All types in section GF ("Ceramic wastes in non-dispersible form").

7. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic material")

>TABLE>

8. All types in section GH ("Solid plastic wastes")

9. All types in section GK ("Rubber wastes").

10. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials")

>TABLE>

TUNISIA:

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(8) form")

>TABLE>

2. In section GC ("Other wastes containing metals")

>TABLE>

3. All types in section GH ("Solid plastic wastes").

4. All types in section GI ("Paper, paperboard and paper product wastes").

5. In section GJ ("Textile wastes")

>TABLE>

6. All types in section GK ("Rubber wastes").

7. In section GM ("Wastes arising from agro-food industries")

>TABLE>

(1) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(2) Although this country is a member of the OECD, it does not apply OECD Council Decision C(92) 39 Final. When this country implements Decision C(92) 39 Final, this Regulation will no longer be applicable to it.

(3) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(4) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(5) Although this country is a member of the OECD, it does not apply OECD Council Decision C(92) 39 Final. When this country implements Decision C(92) 39 Final, this Regulation will no longer be applicable to it.

(6) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(7) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(8) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

ANNEX B

Countries to which shipments of certain categories of waste listed in Annex II (the "green" list) to Regulation (EEC) No 259/93 should be carried out under the control procedure applying to waste listed in Annex IV (the "red" list) of the same Regulation are set out below. The categories of waste listed in Annex II which are covered are also given:

ARGENTINA

All types in Annex II.

BOSNIA AND HERZEGOVINA

All types in Annex II.

BRAZIL

1. In section GA ("Metal and metal-alloy wastes in metallic non-dispersible(1) form")

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GB ("Metal bearing wastes arising from melting, smelting, and refining of metals")

>TABLE>

3. In section GC ("Other wastes containing metals")

>TABLE>

4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form")

>TABLE>

5. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials")

>TABLE>

6. In section GH ("Solid plastic wastes")

>TABLE>

7. In section GJ ("Textile wastes")

>TABLE>

8. In section GK ("Rubber wastes")

>TABLE>

9. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials")

>TABLE>

CHINA

All types in Annex II except those listed in Annex D.

COLOMBIA

All types in Annex II except:

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(2) form")

All types of waste and scrap of non-ferrous metals and their alloys.

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals")

>TABLE>

3. In section GC ("Other wastes containing metals")

>TABLE>

4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form")

>TABLE>

5. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials")

>TABLE>

6. In section GH ("Solid plastic wastes")

>TABLE>

7. In section GJ ("Textile wastes")

>TABLE>

8. In section GK ("Rubber wastes")

>TABLE>

9. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials")

>TABLE>

CUBA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(3) form")

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. All types in section GB ("Metal bearing wastes arising from melting, smelting and refining of metals").

3. All types in section GC ("Other wastes containing metals").

4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form")

>TABLE>

5. All types in section GF ("Ceramic wastes in non-dispersible form").

6. All types in section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic material").

7. All types in section GH ("Solid plastic wastes").

8. All types in section GN ("Wastes arising from tanning and fellmongery operations and leather use").

9. All types in section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials").

ESTONIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(4) form")

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GC ("Other wastes containing metals")

>TABLE>

3. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials")

>TABLE>

4. In section GH ("Solid plastic wastes")

(a) Waste, parings and scrap of plastics of:

>TABLE>

5. In section GK ("Rubber wastes")

>TABLE>

GUINEA

In section GJ ("Textile wastes")

>TABLE>

GUINEA-BISSAU

All types in Annex II.

HUNGARY

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(5) form")

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GC ("Other wastes containing metals")

>TABLE>

3. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials")

>TABLE>

4. In section GH ("Solid plastic wastes")

>TABLE>

5. In section GM ("Wastes arising from agro-food industries")

>TABLE>

6. In section GN ("Wastes arising from tanning and fellmongery operations and leather use")

>TABLE>

INDIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(6) form")

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals")

>TABLE>

3. All types in section GH ("Solid plastic wastes") except

>TABLE>

4. In section GJ ("Textile wastes")

>TABLE>

INDONESIA

All types in Annex II except those listed in Annex A or Annex D.

JAMAICA

1. All types in section GC ("Other wastes containing metals").

2. All types in section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials").

3. All types in section GH ("Solid plastic wastes").

4. All types in section GK ("Rubber wastes").

5. All types in section GM ("Wastes arising from agro-food industries").

6. All types in section GN ("Wastes arising from tanning and fellmongery operations and leather use").

7. All types in section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials").

LITHUANIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(7) form")

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GC ("Other wastes containing metals")

>TABLE>

3. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form")

>TABLE>

4. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials")

>TABLE>

5. All types in section GH ("Solid plastic wastes") except

>TABLE>

6. All types in section GK ("Rubber wastes").

7. In section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials")

>TABLE>

MADAGASCAR

All types in Annex II except those listed in Annex D.

MALAYSIA

All types in Annex II except those listed in Annex D.

MALTA

All types in Annex II.

MAURITIUS

All types in Annex II.

NIGERIA

All types included in section GH ("Solid plastic wastes").

RUSSIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(8), form")

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals")

>TABLE>

3. In section GC ("Other wastes containing metals")

>TABLE>

4. In section GD ("Wastes from mining operations: these wastes to be in non-dispersible form")

>TABLE>

5. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic metals")

>TABLE>

6. All types included in section GH ("Solid plastic wastes"

7. In section GJ ("Textile wastes")

>TABLE>

8. All types included in section GK ("Rubber wastes").

9. In section GM ("Wastes arising from agro-food industries")

>TABLE>

10. In section GN ("Wastes arising from tanning and fellmongery operations and leather use")

>TABLE>

11. In section GO ("Other wastes containing principally organic constituents, which may contain metal and inorganic materials")

>TABLE>

SÃO TOMÉ E PRÍNCIPE

1. In section GJ ("Textile wastes")

>TABLE>

SINGAPORE

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(9),form")

(a) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GH ("Solid plastic wastes")

Waste, parings and scrap of plastics of:

>TABLE>

SLOVAKIA

All types in Annex II except those listed in Annex D.

TOGO

All types in Annex II.

TRINIDAD AND TOBAGO

All types in Annex II.

UKRAINE

All types in Annex II.

ZAMBIA

All types in Annex II except those listed in Annex D.

(1) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(2) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(3) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(4) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(5) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(6) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(7) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(8) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(9) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

ANNEX C

Countries to which shipments of certain categories of waste in Annex II (the "green" list) to Regulation (EEC) No 259/93 should be carried out under the control procedure laid down in Article 15 of the same Regulation are set out below. The categories of waste listed in Annex II which are covered are also given.

BELARUS

All types in Annex II.

LATVIA

All types in Annex II.

PHILIPPINES

1. All types in section GA ("Metals and metal-alloy wastes in metallic, non-dispersible(1) form")

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals")

>TABLE>

3. In section GC ("Other wastes containing metals")

>TABLE>

4. All types in section GH ("Solid plastic wastes")

ROMANIA

All types in Annex II.

TAIWAN

In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(2) form")

The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

URUGUAY

All types in Annex II.

(1) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(2) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

ANNEX D

Countries to which shipments of certain categories of waste listed in Annex II (the "green" list) to Council Regulation (EEC) No 259/93 will be accepted from the EC without recourse to any of the control procedures provided for in the Regulation. Shipments of these wastes to these countries may continue under the same conditions applying to normal commercial transactions. The categories of waste listed in Annex II which are covered are also given:

ALBANIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(1) form")

(a) The following ferrous waste and scrap of iron or steel:

>TABLE>

(b) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. All types included in section GB ("Metal bearing wastes arising from melting, smelting and refining of metals").

3. All types included in section GE ("Glass waste in non-dispersible form").

4. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials")

>TABLE>

5. All types in section GI ("Paper, paperboard and paper product wastes").

6. In section GJ ("Textile wastes")

>TABLE>

ANGOLA

1. All types in section GA ("Metal and metal alloy wastes in metallic, non-dispersible(2) form").

2. All types in section GE ("Glass wastes in non-dispersible form").

3. All types in section GI (Paper, paperboard and paper product wastes).

4. All types in section GJ ("Textile wastes").

5. All types in section GK ("Rubber wastes").

BENIN

All types in Annex II.

BRAZIL

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible form")

(a) The following ferrous waste and scrap of iron or steel:

>TABLE>

(b) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

BULGARIA

All types in section GI ("Paper, paperboard and paper product wastes")

BURKINA FASO

All types in section GA ("Metal and metal alloy wastes in metallic, non-dispersible(3) form")

CAMEROON

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(4) form")

(a) The following waste and scrap of precious metals and their alloys:

>TABLE>

N.B.

Mercury is specifically excluded as a contaminant of these metals or their alloys or amalgams.

(b) The following ferrous waste and scrap of iron or steel:

>TABLE>

2. In section GB ("Metal bearing wastes arising from melting, smelting and refining of metals")

>TABLE>

3. In section GC ("Other wastes containing metals")

>TABLE>

4. In section GE ("Glass waste in non-dispersible form")

>TABLE>

5. In section GF ("Ceramic wastes in non-dispersible form")

>TABLE>

6. In section GH ("Solid plastic wastes")

>TABLE>

7. All types in section GI ("Paper, paperboard and paper product wastes").

8. In section GJ ("Textile wastes")

>TABLE>

9. In section GK ("Rubber wastes")

>TABLE>

10. All types in section GL ("Untreated cork and wood wastes").

11. In section GM ("Wastes arising from agro-food industries")

>TABLE>

CENTRAL AFRICAN REPUBLIC

All types in Annex II.

CHAD

All types in Annex II.

CHILE

All types in Annex II.

CHINA

Obligatory pre-inspection shipment by CCIC (China National Import and Export Commodities Inspection Corporation) before shipment

1. In section GA ("Metal and metal alloy wastes in metallic, non-dispersible(5) form")

(a) The following ferrous waste and scrap of iron or steel:

>TABLE>

(b) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GC ("Other wastes containing metals")

>TABLE>

3. All types in section GI ("Paper, paperboard and paper product wastes").

4. In section GJ ("Textile wastes")

>TABLE>

5. All types in section GL ("Untreated cork and wood wastes").

6. In section GM ("Wastes arising from agro-food industries")

>TABLE>

COMORES

In section GJ ("Textile wastes")

>TABLE>

CONGO

All types in Annex II.

CONGO, DEMOCRATIC REPUBLIC OF

All types in Annex II.

CROATIA

All types in Annex II.

CUBA

All types in Annex II except those listed in Annex B.

CYPRUS

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(6) form")

(a) The following waste and scrap of precious metals and their alloys:

>TABLE>

NB:

Mercury is speciafically excluded as a contaminant of these metals or their alloys or amalgams.

(b) The following ferrous waste and scrap of iron or steel:

>TABLE>

(c) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GK ("Rubber wastes"):

>TABLE>

3. In section GM ("Wastes arising from agro-food industries")

>TABLE>

EGYPT

1. All types in section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(7) form").

2. All types in section GI ("Paper, paperboard and paper product wastes").

3. All types in section GJ ("Textile wastes").

ESTONIA

All types in Annex II except those listed in Annex B.

GAMBIA

In section GJ ("Textile wastes")

>TABLE>

GEORGIA

All types in Annex II.

GRENADA

In section GK ("Rubber wastes")

>TABLE>

HONG KONG

All types in Annex II.

INDIA

All types in Annex II except those listed in Annex B.

INDONESIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(8) form")

The following ferrous waste and scrap of iron or steel:

>TABLE>

2. All types in section GI ("Paper, paperboard and paper product wastes")

3. In section GJ ("Textile wastes")

>TABLE>

ISRAEL

All types in Annex II.

JORDAN

All types in Annex II.

KENYA

All types in Annex II.

KUWAIT

In section GH ("Solid plastic wastes").

Waste, parings and scrap of plastics of:

>TABLE>

LEBANON

In section GJ ("Textile wastes")

>TABLE>

LIECHTENSTEIN

All types in Annex II.

LITHUANIA

All types in Annex II except those listed in Annex B.

MADAGASCAR

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(9) form")

(a) The following waste and scrap of iron and steel:

>TABLE>

(b) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GC ("Other wastes containing metals")

>TABLE>

3. In section GD ("Wastes from mining operations: These wastes to be in non-dispersible form")

>TABLE>

4. In section GE ("Glass waste in non-dispersible form"):

>TABLE>

5. In section GF ("Ceramic wastes in non-dispersible form")

>TABLE>

6. In section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials")

>TABLE>

7. In section GH ("Solid plastic wastes")

>TABLE>

8. All types included in section GI ("Paper, paperboard and paper product wastes").

9. In section GJ ("Textile wastes")

>TABLE>

10. In section GK ("Rubber wastes")

>TABLE>

MALAWI

1. All types in section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(10) form")

2. All types in section GE ("Glass waste in non-dispersible form").

3. All types in section GI ("Paper, paperboard and paper product wastes").

4. In section GJ ("Textile wastes")

>TABLE>

MALAYSIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(11) form")

>TABLE>

2. Obligatory pre-inspection shipment required:

All types in section GI ("Paper, paperboard and paper product wastes").

MALI

All types in Annex II except:

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(12) form")

All types of waste and scrap of non-ferrous metals and their alloys.

2. All types in section GE ("Glass waste in non-dispersible form").

3. All types in section GF ("Ceramic wastes in non-dispersible form").

4. All types in section GH ("Solid plastic wastes").

5. All types in section GN ("Wastes arising from tanning and fellmongery operations and leather use").

MAURITANIA

All types in Annex II.

MONACO

All types in Annex II.

NETHERLANDS ANTILLES

All types in Annex II.

NIGER

1. In section GJ ("Textile wastes")

>TABLE>

2. In section GK ("Rubber wastes")

>TABLE>

PAKISTAN

1. All types in section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(13) form").

2. All types in section GB ("Metal bearing wastes arising from smelting and refining of metals").

3. All types in section GC ("Other wastes containing metals").

4. All types in section GD ("Wastes from mining operations: these wastes to be in non-dispersible form").

5. All types in section GE ("Glass waste in non-dispersible form").

6. All types in section GF ("Ceramic wastes in non-dispersible form").

7. All types in section GG ("Other wastes containing principally inorganic constituents, which may contain metals and organic materials").

8. All types in section GH ("Solid plastic wastes").

9. All types in section GI ("Paper, paperboard and paper product wastes").

10. All types in section GJ ("Textile wastes").

11. In section GK ("Rubber wastes")

>TABLE>

12. All types in section GL ("Untreated cork and wood wastes").

13. In section GM ("Wastes arising from the agro-food industry")

>TABLE>

14. In section GN ("Wastes arising from tanning and fellmongery operations and leather use")

>TABLE>

15. All types in section GO ("Other wastes containing principally organic constituents, which may contain metals and inorganic materials").

PARAGUAY

1. All types included in section GI ("Paper, paperboard and paper product wastes").

2. In section GJ ("Textile wastes")

Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock)

>TABLE>

Cotton waste (including yarn waste and garnetted stock)

>TABLE>

3. In section GL ("Untreated cork and wood wastes")

>TABLE>

PHILIPPINES

All types in Annex II except those listed in Annex C.

RWANDA

All types in Annex II.

SAN MARINO

All types in Annex II.

SÃO TOMÉ E PRÍNCIPE

1. In section GJ ("Textile wastes")

>TABLE>

2. In section GK ("Rubber wastes").

>TABLE>

SIERRA LEONE

All types in Annex II.

SINGAPORE

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(14) form")

The following ferrous waste and scrap of iron or steel:

>TABLE>

SLOVAKIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(15) form")

(a) The following ferrous waste and scrap of iron and steel:

>TABLE>

(b) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GE ("Glass waste in non-dispersible form")

>TABLE>

3. In section GI ("Paper, paperboard and paper product wastes")

>TABLE>

SLOVENIA

All types in Annex II.

SOUTH AFRICA

All types in Annex II.

SRI LANKA

All types in Annex II.

SURINAME

All types in Annex II.

TAIWAN

All types in Annex II except those listed in Annex C.

TANZANIA

In section GJ ("Textile wastes")

>TABLE>

THAILAND

All types in Annex II except those listed in Annex A.

TUNISIA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(16) form")

(a) The following ferrous waste and scrap of iron and steel:

>TABLE>

(b) The following waste and scrap of non-ferrous metals and their alloys:

>TABLE>

2. In section GJ ("Textile waste")

>TABLE>

3. In section GM ("Wastes arising from agro-food industries")

>TABLE>

4. In section GN ("Wastes arising from tanning and fellmongery operations and leather use")

>TABLE>

UGANDA

1. In section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(17) form")

>TABLE>

2. In section GJ ("Textile wastes")

>TABLE>

ZAMBIA

1. All types in section GA ("Metal and metal-alloy wastes in metallic, non-dispersible(18) form").

2. All types in section GE ("Glass waste in non-dispersible form").

3. All types in section GI ("Paper, paperboard and paper product wastes").

4. All types in section GJ ("Textile wastes").

5. All types in section GK ("Rubber wastes").

(1) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(2) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(3) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(4) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(5) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(6) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(7) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(8) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(9) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(10) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(11) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(12) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(13) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(14) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(15) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(16) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(17) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

(18) 'Non-dispersible' does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.

Top