Official Journal
of the European Union
EN
L series
|
|
Official Journal |
EN L series |
|
2024/367 |
23.4.2024 |
COMMISSION IMPLEMENTING DECISION (EU) 2024/367
of 23 January 2024
laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council by establishing the European positive lists of starting substances, compositions and constituents authorised for use in the manufacture of materials or products that come into contact with water intended for human consumption
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive (EU) 2020/2184 of the European Parliament and of the Council of 16 December 2020 on the quality of water intended for human consumption (1), and in particular Article 11(2), point (b), thereof,
Whereas:
|
(1) |
Directive (EU) 2020/2184 provides for the establishment of European positive lists of substances, compositions and constituents for each type of materials, namely organic, cementitious, metallic, enamels, ceramic or other inorganic materials, which are authorised for use in the manufacture of materials or products that come into contact with water intended for human consumption and fall within the scope of Article 11 of that Directive. These European positive lists should include, where appropriate, conditions for the use of substances, compositions and constituents and migration limits, which are to be determined on the basis of the methodologies adopted pursuant to Article 11(2), point (a), of Directive (EU) 2020/2184. Such conditions of use may include a purity criterion, a condition on the physico-chemical characteristics of the starting substance, composition or constituent, a condition on its manufacturing process or on the manufacturing process of final materials, their use for certain products, the use of these products, or further testing requirement. Sacrificial anodes, membranes and ions exchange resins are water treatment chemicals and/or filter media and are covered by Article 12 of Directive (EU) 2020/2184, therefore they are excluded from the scope of Article 11 of that Directive. |
|
(2) |
Article 11(3) of the Directive sets out that lists established by the Commission pursuant to Article 5 of Regulation (EC) No 1935/2004 of the European Parliament and of the Council (2) should be used as a source to establish the first European positive lists under the Directive. The list established in Annex I to Commission Regulation (EU) No 10/2011 (3) is one of these lists. However, substances included on this list have only been assessed for their use in plastic food contact materials in accordance with Regulation (EU) No 10/2011, subject to specific conditions of use. Moreover, the European Food Safety Authority has indicated that a significant number of the substances should be prioritised for re-evaluation as no specific migration limit was established when they were authorised for use in plastic food contact materials (4). The inclusion of such substances in Annex I to Regulation (EU) No 10/2011 nevertheless provides a much higher level of certainty over their safety in contact with drinking water when used in the manufacture of drinking water products, than would be the case for unlisted substances. Therefore it is appropriate to add substances originating from lists established by the Commission pursuant to Article 5 of Regulation (EC) No 1935/2004 to the first European list under Article 11(3) of the Directive, provided these additions are only used as a starting point for further conformity assessment in accordance with Article 11(8), and provided their re-evaluation by the expiry date set out in the first European positive list takes account of all the conditions and drinking water materials in which they may be used. |
|
(3) |
Where applicable, the migration limit, i.e. the maximum tolerable concentration at the tap, should be based on the parametric value set out in Part B or C of Annex I to Directive (EU) 2020/2184 or the specific migration limit set out in Annexes I and II to Regulation (EU) No 10/2011. This should, however, be done after application of an allocation factor to account for the proportion of potential exposure from materials in contact with water intended for human consumption derived from the information provided by Member States. |
|
(4) |
Annex I to Regulation (EU) No 10/2011 provides further detail on conditions of use of authorised substances, as well FCM substance reference numbers used in risk assessments. To facilitate further conformity assessment of substances that are added to the first European positive list on the basis of Annex I to Regulation (EU) No 10/2011, it is appropriate to add their FCM reference numbers in the first European positive lists. |
|
(5) |
The expiry dates included in the first European positive lists follow the recommendation from European Chemicals Agency (ECHA) in particular on the basis of the hazardous properties of the starting substance, composition or constituent, the quality of the underlying risk assessments, the extent to which those risk assessments are up-to-date and the need for a staggered review of these entries. |
|
(6) |
Some entries in the European positive lists should be allowed to be combined, extended to related starting substances, compositions and constituents or extended for use in different material types than the one for which they have been authorised when such combination or extension has no impact on the protection of human health to ensure the proportionality and efficiency of the process. |
|
(7) |
Based on notifications from Member States, the first European positive lists include group entries covering multiple starting substances, compositions or constituents. Assessing the safety of each individual starting substance, composition or constituent separately is more appropriate to assess the safety of the groups; however, at the time of adopting the first European positive list it was not possible to identify the starting substances or organic cementitious constituents in those groups. Therefore, group entries should progressively be replaced in the European positive lists by the individual starting substances, compositions or constituents in the group and the economic operator should only be able to rely on such group entries for the first European positive list if it is able to demonstrate the safety of its starting substance, composition or constituent. |
|
(8) |
In order to ensure an orderly and efficient application process, an entry may be renewed provided that notification of intention and, subsequently, an application is submitted to ECHA within a set deadline. |
|
(9) |
Member States’ national provisions with regard to starting substances, compositions and constituents and their national positive lists were notified to ECHA by 12 July 2021. In order to allow national authorities sufficient time to prepare for the application of the European positive lists, the application of this act will start from 31 December 2026. The national systems are to apply until 31 December 2026. In addition, transitional measures should be provided for substances, compositions and constituents approved in the national systems from 13 July 2021 to 31 December 2026, provided that in accordance with Part B of Annex I to Directive (EU) 2020/2184, these substances do not exceed the parametric value of 5 μg/l for lead (Pb) at the tap. |
|
(10) |
The measures provided for in this Decision are in accordance with the opinion of the Committee referred to in Article 22(1) of Directive (EU) 2020/2184, |
HAS ADOPTED THIS DECISION:
Article 1
European positive lists
This Decision establishes the following:
|
(a) |
the European positive list of starting substances for organic materials and groups of starting substances for organic materials as set out in Tables 1 and 2 of Annex I respectively; |
|
(b) |
the European positive list of compositions of metallic materials and groups of compositions for metallic materials as set out in Tables 1 and 2 of Annex II respectively; |
|
(c) |
the European positive list of organic constituents of cementitious materials and groups of organic constituents for cementitious materials as set out in Tables 2 and 3 of Annex III respectively; |
|
(d) |
the European positive list of compositions of enamels, ceramic and other inorganic materials as set out in Table 1 of Annex IV. |
Article 2
Definitions
For the purpose of this Decision, the following definitions shall apply:
|
(1) |
‘material’ means a solid, semi-solid or liquid that is used for the manufacturing of a product that is:
|
|
(2) |
‘monomer’ means a substance which is capable of forming covalent bonds with a sequence of additional like or unlike molecules under the conditions of the relevant polymer-forming reaction used for the particular process; |
|
(3) |
‘organic material’ means a material that mainly consist of carbon-based substances; |
|
(4) |
‘monomer unit’ means the reacted form of a monomer substance in a polymer; |
|
(5) |
‘polymer’ means a substance consisting of molecules that are characterised by the sequence of one or more types of monomer units ant that are distributed over a range of molecular weights wherein differences in the molecular weight are primarily attributable to differences in the number of monomer units comprising the following:
|
|
(6) |
‘polymerised part’ means the part of a substance composition consisting of molecules characterised by the sequence of one or more types of monomer units. Molecules such as dimers, trimers contribute also to the polymerised part. However, the term ‘polymerised part’ does not cover unreacted monomer or unreacted other reactants; |
|
(7) |
‘pre-polymer’ is a substance resulting from a polymerisation-type of reaction and that is further reacted into a final polymer in a material or product; |
|
(8) |
‘organic cementitious constituent’ means an organic substance that is used in the manufacture of cementitious materials; |
|
(9) |
‘cement’ means a finely ground inorganic material which, when mixed with water, forms a paste that sets and hardens by means of hydration reactions and processes and which, after hardening, retains its strength and stability even under water; |
|
(10) |
‘cementitious material’ means a material that contains a hydraulic cement in sufficient proportion to act as the main binder by forming a hydrate structure which governs the performance of the material; |
|
(11) |
‘non-intentionally added species’ means either one of the following:
|
|
(12) |
‘metallic material’ means a metal or metal alloy used either in bulk form or as metallic plating; |
|
(13) |
‘ceramic materials’ means inorganic poly- or single crystalline, non-metallic solid materials subjected to high temperature in manufacture; |
|
(14) |
‘enamel’ means a material that is a vitreous material obtained by melting at temperatures higher than 1 200 °C and fritting of a mixture of inorganic substances; |
|
(15) |
‘maximum tolerable concentration at the tap’ (MTCtap) means the maximum permitted concentration of a substance transferred from a specific material into water intended for human consumption. |
Article 3
Transitional provision
Starting substances, compositions and constituents which have been approved by a Member State competent authority during the period from 13 July 2021 to 31 December 2026 in accordance with national provisions may be used in the manufacture of materials or products that come into contact with water intended for human consumption until 31 December 2032, provided they comply with the parametric value of 5 μg/l Pb (lead) at the tap as set out in Part B of Annex I to Directive (EU) 2020/2184.
Article 4
Entry into force
This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 31 December 2026.
Done at Brussels, 23 January 2024.
For the Commission
The President
Ursula VON DER LEYEN
(1) OJ L 435, 23.12.2020, p. 1.
(2) Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 on materials and articles intended to come into contact with food and repealing Directives 80/590/EEC and 89/109/EEC (OJ L 338, 13.11.2004, p. 4).
(3) Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food (OJ L 12, 15.1.2011, p. 1).
(4) EFSA CEP Panel (EFSA Panel on Food Contact Materials, Enzymes andProcessing Aids), Silano V, et. al., 2020. Scientific Opinion on the review and priority setting for substances that are listed without a specific migration limit in Table 1 of Annex 1 of Regulation 10/2011on plastic materials and articles intended to come into contact with food. EFSA Journal 2020;18(6):6124,104 pp. https://doi.org/10.2903/j.efsa.2020.6124.
ANNEX I
EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS
Table 1
European positive lists of individual starting substances for organic materials
|
EUPL Number |
EC Number |
CAS Number |
FCM substance Number (A) |
Starting substance name |
Technical function (B) |
Drinking water contact materials (C) |
Maximum Tolerable Concentration at the tap in organic materials (MTCtap, organics) in μg/l |
Total Maximum Tolerable Concentration at the tap (MTC(T)tap, organics) in μg/l (D) |
Conditions of use |
Expiry date |
|||||||||||||||||||||
|
Value for the starting substance |
Values for other relevant chemical species (E) |
||||||||||||||||||||||||||||||
|
0001 |
|
|
1 |
albumin |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0002 |
|
|
2 |
albumin, coagulated by formaldehyde |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0003 |
|
|
7 |
acetylacetic acid, salts |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0004 |
|
|
18 |
aluminium calcium hydroxide phosphite, hydrate |
Additive or polymer production aid |
All |
|
|
For aluminium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0005 |
|
|
21 |
carbonic acid, salts |
Additive Polymer production aid Aid to polymerisation |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0006 |
|
|
24 |
cotton fibres |
Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0007 |
|
|
29 |
di-n-octyltin bis(ethyl maleate) |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2034 |
||||||||||||||||||||
|
0008 |
|
|
30 |
di-n-octyltin 1,4-butanediol bis(mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2028 |
||||||||||||||||||||
|
0009 |
|
|
32 |
di-n-octyltin dimaleate, polymers (n = 2-4) |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2034 |
||||||||||||||||||||
|
0010 |
|
|
33 |
di-n-octyltin thiobenzoate 2-ethylhexyl mercaptoacetate |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2028 |
||||||||||||||||||||
|
0011 |
|
|
34 |
ethylhydroxymethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0012 |
|
|
35 |
ethylhydroxypropylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0013 |
|
|
36 |
fats and oils, from animal or vegetable food sources |
Polymer production aid Additive Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0014 |
|
|
37 |
fats and oils, hydrogenated, from animal or vegetable food sources |
Polymer production aid Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0015 |
|
|
39 |
glass microballs |
Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0016 |
|
|
54 |
glycerol monooleate, ester with ascorbic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0017 |
|
|
55 |
glycerol monooleate, ester with citric acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0018 |
|
|
56 |
glycerol monopalmitate, ester with ascorbic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0019 |
|
|
57 |
glycerol monopalmitate, ester with citric acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0020 |
|
|
58 |
glycerol monostearate, ester with ascorbic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0021 |
|
|
59 |
glycerol monostearate, ester with citric acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0022 |
|
|
60 |
glycine, salts |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0023 |
|
|
62 |
lysine, salts |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0024 |
|
|
63 |
manganese pyrophosphite |
Additive or polymer production aid |
All |
|
|
For manganese, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0025 |
|
|
64 |
methylhydroxymethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0026 |
|
|
70 |
polyacrylic acid, salts |
Additive or polymer production aid |
All |
|
|
(21) |
|
31 December 2037 |
||||||||||||||||||||
|
0027 |
|
|
71 |
polydimethylsiloxane, γ-hydroxy propylated |
Additive or polymer production aid |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0028 |
|
|
72 |
polyester of adipic acid with glycerol or pentaerythritol, esters with even numbered, unbranched C12-C22 fatty acids |
Additive or polymer production aid |
Plastics |
|
|
(31) |
Purity of starting substance: the fraction with molecular weight below 1 000 Da shall not exceed 5 % (w/w). |
31 December 2034 |
||||||||||||||||||||
|
0029 |
|
|
74 |
polyethyleneglycol diricinoleate |
Additive or polymer production aid |
All |
2100 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0030 |
|
|
75 |
polyethyleneglycol esters of aliph. monocarb. acids (C6-C22) and their ammonium and sodium sulfates |
Additive Polymer production aid Other (processing aid) |
All |
|
|
For ammonium, refer to Annex V. |
|
31 December 2037 |
||||||||||||||||||||
|
0031 |
|
|
76 |
polyethylene glycol (EO = 1-30, typically 5) ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate |
Additive or polymer production aid |
Plastics |
2,5 |
|
|
Only for use in PET. |
31 December 2034 |
||||||||||||||||||||
|
0032 |
|
|
77 |
polyethyleneglycol (EO = 1-30, typically 5) ether of butyl-2-cyano-3-(4-hydroxyphenyl) acrylate |
Additive or polymer production aid |
Plastics |
2,5 |
|
|
Only for use in PET. |
31 December 2034 |
||||||||||||||||||||
|
0033 |
|
|
79 |
polyoxyalkyl (C2-C4) dimethyl polysiloxane |
Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0034 |
|
|
81 |
propylhydroxyethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0035 |
|
|
82 |
propylhydroxymethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0036 |
|
|
83 |
propylhydroxypropylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0037 |
|
|
84 |
silicates, natural (with the exception of asbestos) |
Additive |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0038 |
|
|
85 |
silicates, natural, silanated (with the exception of asbestos) |
Additive |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0039 |
|
|
86 |
silicic acid, silylated |
Additive |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0040 |
|
|
87 |
silicon dioxide, silanated |
Additive |
All |
|
|
|
For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0041 |
|
|
88 |
sodium monoalkyl dialkylphenoxybenzenedisulfonate |
Additive or polymer production aid |
All |
450 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0042 |
|
|
90 |
taurine, salts |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0043 |
|
|
91 |
tetradecyl-polyethyleneglycol(EO = 3-8) ether of glycolic acid |
Additive or polymer production aid |
All |
750 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0044 |
|
|
92 |
tricyclodecanedimethanol bis(hexahydrophthalate) |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0045 |
|
|
93 |
waxes, paraffinic, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, low viscosity |
Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) |
All |
2,5 |
|
|
Average molecular weight not less than 350 Da. Viscosity at 100 °C not less than 2,5 cSt (2,5 × 10-6 m2 /s). Content of hydrocarbons with carbon number less than 25, not more than 40 % (w/w). |
31 December 2028 |
||||||||||||||||||||
|
0046 |
|
|
94 |
waxes, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, high viscosity |
Additive Polymer production aid |
All |
|
|
|
Average molecular weight not less than 500 Da. Viscosity at 100 °C not less than 11 cSt (11 × 10-6 m2 /s). Content of mineral hydrocarbons with carbon number less than 25, not more than 5 % (w/w). |
31 December 2028 |
||||||||||||||||||||
|
0047 |
|
|
95 |
white mineral oils, paraffinic, derived from petroleum based hydrocarbon feedstocks |
Monomer or other reactant (base oil) Additive Polymer production aid |
All |
|
|
|
Average molecular weight not less than 480 Da. Viscosity at 100 °C not less than 8,5 cSt (8,5 × 10-6 m2 /s). Content of mineral hydrocarbons with carbon number less than 25, not more than 5 % (w/w). |
31 December 2028 |
||||||||||||||||||||
|
0048 |
|
|
97 |
petroleum hydrocarbon resins (hydrogenated) |
Monomer or other reactant (resin) Additive |
All |
150 (Note: based on a notified national approval) |
|
|
Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermal polymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties:
|
31 December 2028 |
||||||||||||||||||||
|
0049 |
|
50-00-0 |
98 |
formaldehyde |
Monomer or other reactant |
All |
|
|
(15) |
|
31 December 2028 |
||||||||||||||||||||
|
0050 |
|
50-70-4 |
100 |
sorbitol |
Monomer or other reactant Additive |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0051 |
|
50-81-7 |
101 |
ascorbic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0052 |
|
56-81-5 |
103 |
glycerol |
Monomer or other reactant Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0053 |
|
57-09-0 |
104 |
hexadecyltrimethylammonium bromide |
Additive Polymer production aid |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0054 |
|
57-10-3 |
105 |
palmitic acid |
Monomer or other reactant Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0055 |
|
57-11-4 |
106 |
stearic acid |
Monomer or other reactant Additive Polymer production aid Aid to polymerisation Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0056 |
|
57-13-6 |
107 |
urea |
Monomer or other reactant Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0057 |
|
57-50-1 |
108 |
sucrose |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0058 |
|
60-00-4 |
111 |
ethylenediaminetetraacetic acid (EDTA) |
Additive Polymer production aid |
All |
60 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0059 |
|
60-33-3 |
112 |
linoleic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0060 |
|
64-17-5 |
113 |
ethanol |
Monomer or other reactant Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0061 |
|
64-18-6 |
114 |
formic acid |
Monomer or other reactant Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0062 |
|
64-19-7 |
115 |
acetic acid |
Monomer or other reactant Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0063 |
|
65-85-0 |
116 |
benzoic acid |
Monomer or other reactant Polymer production aid Aid to polymerisation |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0064 |
|
67-56-1 |
117 |
methanol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0065 |
|
67-63-0 |
118 |
2-propanol |
Monomer or other reactant Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0066 |
|
67-64-1 |
119 |
acetone |
Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0067 |
|
67-68-5 |
120 |
dimethyl sulfoxide |
Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0068 |
|
69-72-7 |
121 |
salicylic acid |
Monomer or other reactant, aid to polymerisation, Other (processing aid) |
Coatings Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0069 |
|
71-23-8 |
122 |
1-propanol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0070 |
|
71-36-3 |
123 |
1-butanol |
Monomer or other reactant Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0071 |
|
71-41-0 |
124 |
1-pentanol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0072 |
|
74-85-1 |
125 |
ethylene |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0073 |
|
74-86-2 |
126 |
acetylene |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0074 |
|
75-01-4 |
127 |
vinyl chloride |
Monomer or other reactant |
All |
0,5 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product. |
31 December 2028 |
||||||||||||||||||||
|
0075 |
|
75-07-0 |
128 |
acetaldehyde |
Monomer or other reactant |
All |
|
|
(1) |
|
31 December 2028 |
||||||||||||||||||||
|
0076 |
|
75-21-8 |
129 |
ethylene oxide |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. |
31 December 2028 |
||||||||||||||||||||
|
0077 |
|
75-35-4 |
130 |
vinylidene chloride |
Monomer or other reactant |
All |
0,1 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2028 |
||||||||||||||||||||
|
0078 |
|
75-37-6 |
131 |
1,1-difluoroethane |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0079 |
|
75-38-7 |
132 |
vinylidene fluoride |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0080 |
|
75-44-5 |
133 |
carbonyl chloride |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. |
31 December 2034 |
||||||||||||||||||||
|
0081 |
|
75-45-6 |
134 |
chlorodifluoromethane |
Additive or polymer production aid |
All |
300 |
|
|
Content of chlorofluoromethane less than 1 mg/kg of the substance. |
31 December 2034 |
||||||||||||||||||||
|
0082 |
|
76-22-2 |
136 |
camphor |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0083 |
|
77-62-3 |
137 |
2,2′-methylenebis(4-methyl-6-(1- methylcyclohexyl)phenol) |
Additive |
All |
|
|
(5) |
|
31 December 2034 |
||||||||||||||||||||
|
0084 |
|
77-90-7 |
138 |
tri-n-butyl acetyl citrate |
Additive or polymer production aid |
All |
|
|
(31) |
|
31 December 2034 |
||||||||||||||||||||
|
0085 |
|
77-92-9 |
139 |
citric acid |
Monomer or other reactant Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0086 |
|
77-93-0 |
140 |
citric acid, triethyl ester |
Additive or polymer production aid |
All |
|
|
(31) |
|
31 December 2034 |
||||||||||||||||||||
|
0087 |
|
77-99-6 |
141 |
1,1,1-trimethylolpropane |
Monomer or other reactant Additive |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0088 |
|
78-08-0 |
142 |
vinyltriethoxysilane |
Additive Other (processing aid) |
All |
2,5 |
|
|
Only to be used as a surface treatment agent. |
31 December 2034 |
||||||||||||||||||||
|
0089 |
|
78-78-4 |
143 |
isopentane |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0090 |
|
78-79-5 |
144 |
2-methyl–1,3-butadiene (isoprene) |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product. |
31 December 2028 |
||||||||||||||||||||
|
0091 |
|
79-06-1 |
145 |
acrylamide |
Monomer or other reactant |
All |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0092 |
|
79-09-4 |
146 |
propionic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0093 |
|
79-10-7 |
147 |
acrylic acid |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2034 |
||||||||||||||||||||
|
0094 |
|
79-38-9 |
148 |
chlorotrifluoroethylene |
Monomer or other reactant |
All |
0,1 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2034 |
||||||||||||||||||||
|
0095 |
|
79-39-0 |
149 |
methacrylamide |
Monomer or other reactant |
All |
0,1 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0096 |
|
79-41-4 |
150 |
methacrylic acid |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0097 |
|
80-05-7 |
151 |
2,2-bis(4-hydroxyphenyl)propane |
Monomer or other reactant Additive |
All |
2,5 |
|
|
Technical function as additive is only accepted for plastics. |
31 December 2028 |
||||||||||||||||||||
|
0098 |
|
80-07-9 |
152 |
4,4′-dichlorodiphenyl sulfone |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0099 |
|
80-08-0 |
153 |
4,4′-diaminodiphenyl sulfone |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0100 |
|
80-09-1 |
154 |
4,4′-dihydroxydiphenyl sulfone |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0101 |
|
80-56-8 |
155 |
α-pinene |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0102 |
|
80-62-6 |
156 |
methacrylic acid, methyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0103 |
|
84-74-2 |
157 |
phthalic acid, dibutyl ester ('DBP') |
Additive |
All |
6,0 |
|
(31) (35) |
Only to be used as:
|
31 December 2028 |
||||||||||||||||||||
|
0104 |
|
85-44-9 |
158 |
phthalic anhydride |
Monomer or other reactant Aid to polymerisation |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0105 |
|
85-68-7 |
159 |
phthalic acid, benzyl butyl ester ('BBP') |
Additive |
All |
300 |
|
(31) (35) |
Only to be used as
≤ 5% as sum of all phthalates. |
31 December 2028 |
||||||||||||||||||||
|
0106 |
|
87-18-3 |
160 |
salicylic acid, 4-tert-butylphenyl ester |
Additive or polymer production aid |
All |
600 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2028 |
||||||||||||||||||||
|
0107 |
|
87-69-4 |
161 |
L-(+)-tartaric acid |
Monomer or other reactant Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0108 |
|
87-78-5 |
162 |
mannitol |
Monomer or other reactant Polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0109 |
|
88-24-4 |
163 |
2,2′-methylene bis(4-ethyl-6-tert-butylphenol) |
Additive |
All |
|
|
(13) |
|
31 December 2034 |
||||||||||||||||||||
|
0110 |
|
88-68-6 |
164 |
2-aminobenzamide |
Additive or polymer production aid |
Plastics |
2,5 |
|
|
Only for use in PET. |
31 December 2034 |
||||||||||||||||||||
|
0111 |
|
88-99-3 |
165 |
o-phthalic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0112 |
|
89-32-7 |
166 |
pyromellitic anhydride |
Monomer or other reactant |
All |
2,5 – expressed as the sum of pyromellitic anhydride and pyromellitc acid |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0113 |
|
91-08-7 |
167 |
2,6-toluene diisocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0114 |
|
91-76-9 |
168 |
2,4-diamino-6-phenyl-1,3,5- triazine |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0115 |
|
91-97-4 |
169 |
3,3′-dimethyl–4,4′-diisocyanato biphenyl |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0116 |
|
92-88-6 |
170 |
4,4′-dihydroxybiphenyl |
Monomer or other reactant |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0117 |
|
93-58-3 |
171 |
benzoic acid, methyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0118 |
|
93-89-0 |
172 |
benzoic acid, ethyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0119 |
|
94-13-3 |
173 |
4-hydroxybenzoic acid, propyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0120 |
|
95-48-7 |
174 |
o-cresol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0121 |
|
96-05-9 |
175 |
methacrylic acid, allyl ester |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0122 |
|
96-33-3 |
176 |
acrylic acid, methyl ester |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2034 |
||||||||||||||||||||
|
0123 |
|
96-49-1 |
177 |
ethylene carbonate |
Monomer or other reactant |
All |
1500 - expressed as ethyleneglycol |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0124 |
|
96-69-5 |
178 |
4,4′-thiobis(6-tert-butyl-3-methyl phenol) |
Additive |
All |
24 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0125 |
|
97-23-4 |
179 |
2,2′-dihydroxy–5,5′-dichlorodiphenylmethane |
Additive or polymer production aid |
All |
600 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0126 |
|
97-53-0 |
180 |
eugenol |
Monomer or other reactant |
All |
|
|
(32) |
|
31 December 2034 |
||||||||||||||||||||
|
0127 |
|
97-63-2 |
181 |
methacrylic acid, ethyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0128 |
|
97-65-4 |
182 |
itaconic acid |
Monomer or other reactant Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0129 |
|
97-86-9 |
183 |
methacrylic acid, isobutyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0130 |
|
97-88-1 |
184 |
methacrylic acid, butyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0131 |
|
97-90-5 |
185 |
methacrylic acid, diester with ethyleneglycol |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0132 |
|
98-54-4 |
186 |
4-tert-butylphenol |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0133 |
|
98-83-9 |
187 |
α-methylstyrene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0134 |
|
99-63-8 |
188 |
isophthalic acid dichloride |
Monomer or other reactant |
All |
|
|
(26) |
|
31 December 2034 |
||||||||||||||||||||
|
0135 |
|
99-76-3 |
189 |
4-hydroxybenzoic acid, methyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0136 |
|
99-96-7 |
190 |
p-hydroxybenzoic acid |
Monomer or other reactant Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0137 |
|
100-20-9 |
191 |
terephthalic acid dichloride |
Monomer or other reactant |
All |
|
|
(27) |
|
31 December 2034 |
||||||||||||||||||||
|
0138 |
|
|
192 |
phthalic acid |
Monomer or other reactant Additive |
All |
|
|
(27) |
|
31 December 2034 |
||||||||||||||||||||
|
0139 |
|
100-42-5 |
193 |
styrene |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0140 |
|
100-51-6 |
194 |
benzyl alcohol |
Monomer or other reactant Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0141 |
|
100-52-7 |
195 |
benzaldehyde |
Additive or polymer production aid |
All |
|
|
|
There is a risk that the migration of the substance deteriorates the organoleptic characteristics of the drinking water and then, that the product does not comply with Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0142 |
|
100-97-0 |
196 |
hexamethylenetetramine |
Monomer or other reactant Aid to polymerisation |
All |
|
|
(15) |
|
31 December 2034 |
||||||||||||||||||||
|
0143 |
|
101-43-9 |
197 |
methacrylic acid, cyclohexyl ester |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0144 |
|
101-68-8 |
198 |
diphenylmethane–4,4′-diisocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0145 |
|
101-90-6 |
199 |
resorcinol diglycidyl ether |
Monomer or other reactant |
All |
0,1 |
|
|
For indirect water contact only, behind a PET layer. Verification of compliance by residual content per water contact surface area (QMA); QMA = 0,0083 dm-1. |
31 December 2028 |
||||||||||||||||||||
|
0146 |
|
102-08-9 |
200 |
N,N′-diphenylthiourea |
Additive or polymer production aid |
All |
150 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0147 |
|
102-09-0 |
201 |
diphenyl carbonate |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0148 |
|
102-39-6 |
202 |
(1,3-phenylenedioxy)diacetic acid |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0149 |
|
102-40-9 |
203 |
1,3-bis(2-hydroxyethoxy)benzene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0150 |
|
102-60-3 |
204 |
N,N,N′,N′-tetrakis(2-hydroxypropyl)ethylenediamine |
Monomer or other reactant Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0151 |
|
103-11-7 |
206 |
acrylic acid, 2-ethylhexyl ester |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0152 |
|
103-23-1 |
207 |
adipic acid, bis(2-ethylhexyl) ester |
Additive |
All |
900 |
|
(31) |
|
31 December 2034 |
||||||||||||||||||||
|
0153 |
|
103-90-2 |
208 |
N-(4-hydroxyphenyl) acetamide |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0154 |
|
104-76-7 |
209 |
2-ethyl-1-hexanol |
Monomer or other reactant |
All |
1500 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0155 |
|
105-08-8 |
210 |
1,4-bis(hydroxymethyl)cyclohexane |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0156 |
|
105-38-4 |
211 |
propionic acid, vinyl ester |
Monomer or other reactant |
All |
|
|
(1) |
|
31 December 2034 |
||||||||||||||||||||
|
0157 |
|
105-60-2 |
212 |
caprolactam |
Monomer or other reactant Additive Aid to polymerisation |
All |
|
|
(4) |
When used for coatings, only for hot curing coatings. |
31 December 2034 |
||||||||||||||||||||
|
0158 |
|
105-62-4 |
213 |
1,2-propyleneglycol dioleate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0159 |
|
106-14-9 |
214 |
12-hydroxystearic acid |
Monomer or other reactant Additive Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0160 |
|
106-31-0 |
215 |
butyric anhydride |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0161 |
|
106-44-5 |
216 |
p-cresol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0162 |
|
106-46-7 |
217 |
1,4-dichlorobenzene |
Monomer or other reactant |
All |
600 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0163 |
|
106-63-8 |
218 |
acrylic acid, isobutyl ester |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2034 |
||||||||||||||||||||
|
0164 |
|
106-89-8 |
219 |
epichlorohydrin |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. |
31 December 2028 |
||||||||||||||||||||
|
0165 |
|
106-91-2 |
220 |
methacrylic acid, 2,3-epoxypropyl ester |
Monomer or other reactant |
All |
1,0 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. |
31 December 2028 |
||||||||||||||||||||
|
0166 |
|
106-97-8 |
221 |
butane |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0167 |
|
106-98-9 |
222 |
1-butene |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0168 |
|
106-99-0 |
223 |
butadiene |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product. |
31 December 2028 |
||||||||||||||||||||
|
0169 |
|
107-13-1 |
225 |
acrylonitrile |
Monomer or other reactant |
All |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0170 |
|
107-15-3 |
226 |
ethylenediamine |
Monomer or other reactant Polymer production aid |
All |
600 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0171 |
|
107-21-1 |
227 |
ethyleneglycol |
Monomer or other reactant |
All |
|
|
(2) |
|
31 December 2034 |
||||||||||||||||||||
|
0172 |
|
107-92-6 |
229 |
butyric acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0173 |
|
108-01-0 |
230 |
dimethylaminoethanol |
Monomer or other reactant |
All |
900 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0174 |
|
108-05-4 |
231 |
acetic acid, vinyl ester |
Monomer or other reactant |
All |
600 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0175 |
|
108-24-7 |
232 |
acetic anhydride |
Monomer or other reactant Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0176 |
|
108-30-5 |
233 |
succinic anhydride |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0177 |
|
108-31-6 |
234 |
maleic anhydride |
Monomer or other reactant Additive Polymer production aid Other (processing aid) |
All |
|
|
(3) |
|
31 December 2034 |
||||||||||||||||||||
|
0178 |
|
108-39-4 |
235 |
m-cresol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0179 |
|
108-45-2 |
236 |
1,3-phenylenediamine |
Monomer or other reactant |
All |
0,1 |
|
|
A detection limit of 0,1 μg/l applies. |
31 December 2028 |
||||||||||||||||||||
|
0180 |
|
108-46-3 |
237 |
1,3-dihydroxybenzene (resorcinol) |
Monomer or other reactant Other (processing aid) |
All |
120 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0181 |
|
108-55-4 |
238 |
glutaric anhydride |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0182 |
|
108-78-1 |
239 |
2,4,6-triamino-1,3,5-triazine (melamine) |
Monomer or other reactant |
All |
125 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0183 |
|
108-91-8 |
240 |
cyclohexylamine |
Monomer or other reactant Aid to polymerisation |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0184 |
|
108-95-2 |
241 |
phenol |
Monomer or other reactant |
All |
150 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0185 |
|
109-43-3 |
242 |
sebacic acid, dibutyl ester |
Additive Polymer production aid |
All |
|
|
(31) |
|
31 December 2034 |
||||||||||||||||||||
|
0186 |
|
109-53-5 |
243 |
isobutyl vinyl ether |
Monomer or other reactant |
All |
2,5 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. |
31 December 2034 |
||||||||||||||||||||
|
0187 |
|
109-66-0 |
244 |
pentane |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0188 |
|
109-67-1 |
245 |
1-pentene |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0189 |
|
109-99-9 |
246 |
tetrahydrofuran |
Monomer or other reactant Polymer production aid |
All |
30 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0190 |
|
110-15-6 |
247 |
succinic acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0191 |
|
110-16-7 |
248 |
maleic acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
(3) |
|
31 December 2034 |
||||||||||||||||||||
|
0192 |
|
110-17-8 |
249 |
fumaric acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0193 |
|
110-30-5 |
250 |
N,N′-ethylenebisstearamide |
Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0194 |
|
110-31-6 |
251 |
N,N′-ethylenebisoleamide |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0195 |
|
110-44-1 |
252 |
sorbic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0196 |
|
110-60-1 |
253 |
1,4-diaminobutane |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0197 |
|
110-63-4 |
254 |
1,4-butanediol |
Monomer or other reactant Additive |
All |
|
|
(29) |
|
31 December 2034 |
||||||||||||||||||||
|
0198 |
|
110-88-3 |
255 |
trioxane |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0199 |
|
110-94-1 |
256 |
glutaric acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0200 |
|
111-06-8 |
258 |
palmitic acid, butyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0201 |
|
111-14-8 |
259 |
heptanoic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0202 |
|
111-20-6 |
260 |
sebacic acid |
Monomer or other reactant Additive Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0203 |
|
111-40-0 |
261 |
diethylenetriamine |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0204 |
|
111-41-1 |
262 |
N-(2-aminoethyl)ethanolamine |
Additive or polymer production aid |
All |
2,5 |
|
|
For indirect water contact only, behind a PET layer. |
31 December 2028 |
||||||||||||||||||||
|
0205 |
|
111-46-6 |
263 |
diethyleneglycol |
Monomer or other reactant Aid to polymerisation |
All |
|
|
(2) |
|
31 December 2034 |
||||||||||||||||||||
|
0206 |
|
111-66-0 |
264 |
1-octene |
Monomer or other reactant |
All |
750 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0207 |
|
111-87-5 |
265 |
1-octanol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0208 |
|
112-27-6 |
266 |
triethyleneglycol |
Monomer or other reactant Additive Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0209 |
|
112-30-1 |
267 |
1-decanol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0210 |
|
112-41-4 |
268 |
1-dodecene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0211 |
|
112-60-7 |
269 |
tetraethyleneglycol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0212 |
|
112-80-1 |
270 |
oleic acid |
Monomer or other reactant Additive Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0213 |
|
112-84-5 |
271 |
erucamide |
Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0214 |
|
112-85-6 |
272 |
behenic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0215 |
|
112-86-7 |
273 |
erucic acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0216 |
|
112-96-9 |
274 |
octadecyl isocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0217 |
|
115-07-1 |
275 |
propylene |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0218 |
|
115-11-7 |
276 |
isobutene |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0219 |
|
115-27-5 |
277 |
hexachloroendomethylenetetrahydrophthalic anhydride |
Monomer or other reactant Other (processing aid) |
All |
0,1 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0220 |
|
115-28-6 |
278 |
hexachloroendomethylenetetrahydrophthalic acid |
Monomer or other reactant Other (processing aid) |
All |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0221 |
|
115-77-5 |
279 |
pentaerythritol |
Monomer or other reactant Additive |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0222 |
|
115-96-8 |
280 |
phosphoric acid, trichloroethyl ester |
Additive or polymer production aid |
All |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0223 |
|
116-14-3 |
281 |
tetrafluoroethylene |
Monomer or other reactant |
All |
2,5 |
|
|
When used for coatings, only as monomer for polymeric additives. |
31 December 2028 |
||||||||||||||||||||
|
0224 |
|
116-15-4 |
282 |
hexafluoropropylene |
Monomer or other reactant |
All |
0,1 |
|
(38) |
|
31 December 2028 |
||||||||||||||||||||
|
0225 |
|
117-81-7 |
283 |
phthalic acid, bis(2-ethylhexyl) ester ('DEHP') |
Additive Polymer production aid |
All |
30 |
|
(31) (35) |
Only to be used as:
|
31 December 2028 |
||||||||||||||||||||
|
0226 |
|
119-36-8 |
284 |
salicylic acid, methyl ester |
Additive or polymer production aid |
All |
1500 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0227 |
|
119-47-1 |
285 |
2,2′-methylene bis(4-methyl-6-tert-butylphenol) |
Additive |
All |
|
|
(13) |
|
31 December 2028 |
||||||||||||||||||||
|
0228 |
|
119-61-9 |
286 |
benzophenone |
Aid to polymerisation |
All |
30 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0229 |
|
120-47-8 |
287 |
4-hydroxybenzoic acid, ethyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0230 |
|
120-61-6 |
288 |
terephthalic acid, dimethyl ester |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0231 |
|
120-80-9 |
289 |
1,2-dihydroxybenzene |
Monomer or other reactant |
All |
300 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0232 |
|
121-79-9 |
290 |
gallic acid, propyl ester |
Additive |
All |
|
|
(19) |
|
31 December 2034 |
||||||||||||||||||||
|
0233 |
|
121-91-5 |
291 |
isophthalic acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
(26) |
|
31 December 2034 |
||||||||||||||||||||
|
0234 |
|
122-20-3 |
292 |
triisopropanolamine |
Monomer or other reactant Aid to polymerisation |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0235 |
|
122-52-1 |
293 |
phosphorous acid, triethyl ester |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product. |
31 December 2034 |
||||||||||||||||||||
|
0236 |
|
123-28-4 |
294 |
thiodipropionic acid, didodecyl ester |
Additive or polymer production aid |
All |
|
|
(14) |
|
31 December 2034 |
||||||||||||||||||||
|
0237 |
|
123-31-9 |
295 |
1,4-dihydroxybenzene |
Monomer or other reactant |
All |
30 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0238 |
|
123-38-6 |
296 |
propionaldehyde |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0239 |
|
123-62-6 |
297 |
propionic anhydride |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0240 |
|
123-72-8 |
298 |
butyraldehyde |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0241 |
|
123-76-2 |
299 |
levulinic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0242 |
|
123-86-4 |
300 |
acetic acid, butyl ester |
Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0243 |
|
123-95-5 |
301 |
stearic acid, butyl ester |
Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0244 |
|
123-99-9 |
302 |
azelaic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0245 |
|
124-04-9 |
303 |
adipic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0246 |
|
124-07-2 |
304 |
caprylic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0247 |
|
124-09-4 |
305 |
hexamethylenediamine |
Monomer or other reactant |
All |
120 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0248 |
|
124-26-5 |
306 |
stearamide |
Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0249 |
|
124-38-9 |
307 |
carbon dioxide |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0250 |
|
126-13-6 |
308 |
sucrose acetate isobutyrate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0251 |
|
126-14-7 |
309 |
sucrose octaacetate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0252 |
|
126-30-7 |
310 |
2,2-dimethyl–1,3-propanediol (neopentylglycol) |
Monomer or other reactant |
All |
2,5 - expressed as mono and diethylene glycols |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0253 |
|
126-58-9 |
311 |
dipentaerythritol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0254 |
|
126-98-7 |
312 |
methacrylonitrile |
Monomer or other reactant |
All |
0,1 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0255 |
|
127-63-9 |
313 |
diphenyl sulfone |
Monomer or other reactant |
All |
150 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0256 |
|
127-91-3 |
314 |
β-pinene |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0257 |
|
128-37-0 |
315 |
2,6-di-tert-butyl-p-cresol |
Additive Polymer production aid |
All |
150 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0258 |
|
131-17-9 |
316 |
phthalic acid, diallyl ester |
Monomer or other reactant |
All |
0,1 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0259 |
|
131-53-3 |
317 |
2,2′-dihydroxy-4-methoxybenzophenone |
Additive or polymer production aid |
All |
|
|
(8) |
|
31 December 2034 |
||||||||||||||||||||
|
0260 |
|
131-56-6 |
318 |
2,4-dihydroxybenzophenone |
Aid to polymerisation |
All |
|
|
(8) |
|
31 December 2034 |
||||||||||||||||||||
|
0261 |
|
131-57-7 |
319 |
2-hydroxy-4-methoxybenzophenone |
Additive or polymer production aid |
All |
|
|
(8) |
|
31 December 2034 |
||||||||||||||||||||
|
0262 |
|
136-60-7 |
320 |
benzoic acid, butyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0263 |
|
137-66-6 |
321 |
ascorbyl palmitate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0264 |
|
140-88-5 |
323 |
acrylic acid, ethyl ester |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2034 |
||||||||||||||||||||
|
0265 |
|
141-22-0 |
324 |
ricinoleic acid |
Monomer or other reactant |
All |
2100 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0266 |
|
141-32-2 |
325 |
acrylic acid, n-butyl ester |
Monomer or other reactant |
All, except rubber |
|
|
(21) |
|
31 December 2034 |
||||||||||||||||||||
|
0267 |
|
141-43-5 |
326 |
2-aminoethanol |
Monomer or other reactant |
All |
2,5 |
|
|
For indirect water contact only, behind a PET layer, except when used for coatings. |
31 December 2034 |
||||||||||||||||||||
|
0268 |
|
141-78-6 |
327 |
acetic acid, ethyl ester |
Additive |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0269 |
|
141-82-2 |
328 |
malonic acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0270 |
|
142-62-1 |
329 |
hexanoic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0271 |
|
143-07-7 |
330 |
lauric acid |
Monomer or other reactant Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0272 |
|
143-08-8 |
331 |
1-nonanol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0273 |
|
143-28-2 |
332 |
oleyl alcohol |
Monomer or other reactant Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0274 |
|
144-62-7 |
333 |
oxalic acid |
Monomer or other reactant Other (processing aid) |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0275 |
|
151-56-4 |
334 |
ethyleneimine |
Monomer or other reactant |
All |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0276 |
|
301-02-0 |
335 |
oleamide |
Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0277 |
|
334-48-5 |
336 |
n-decanoic acid |
Monomer or other reactant Additive Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0278 |
|
345-92-6 |
337 |
4,4′-difluorobenzophenone |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0279 |
|
373-49-9 |
338 |
palmitoleic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0280 |
|
409-21-2 |
339 |
silicon carbide |
Monomer or other reactant Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0281 |
|
461-58-5 |
340 |
dicyanodiamide |
Monomer or other reactant |
All |
3000 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0282 |
|
498-66-8 |
341 |
bicyclo[2.2.1]hept-2-ene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0283 |
|
502-44-3 |
342 |
caprolactone |
Monomer or other reactant |
All |
|
|
(28) |
|
31 December 2034 |
||||||||||||||||||||
|
0284 |
|
504-63-2 |
343 |
1,3-propanediol |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0285 |
|
505-65-7 |
344 |
1,4-butanediol formal |
Monomer or other reactant |
All |
2,5 |
|
(15) (29) |
|
31 December 2034 |
||||||||||||||||||||
|
0286 |
|
506-30-9 |
345 |
arachidic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0287 |
|
514-10-3 |
346 |
abietic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0288 |
|
528-44-9 |
347 |
trimellitic acid |
Monomer or other reactant |
All |
|
|
(20) |
|
31 December 2028 |
||||||||||||||||||||
|
0289 |
|
544-63-8 |
348 |
myristic acid |
Monomer or other reactant Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0290 |
|
552-30-7 |
349 |
trimellitic anhydride |
Monomer or other reactant |
All |
|
|
(20) |
|
31 December 2034 |
||||||||||||||||||||
|
0291 |
|
557-59-5 |
350 |
lignoceric acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0292 |
|
563-45-1 |
351 |
3-methyl-1-butene |
Monomer or other reactant |
Plastics |
0,1 |
|
|
Only to be used in polypropylene. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2028 |
||||||||||||||||||||
|
0293 |
|
576-26-1 |
352 |
2,6-dimethylphenol |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0294 |
|
584-09-8 |
353 |
carbonic acid, rubidium salt |
Additive or polymer production aid |
All |
600 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0295 |
|
584-84-9 |
354 |
2,4-toluene diisocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0296 |
|
585-07-9 |
355 |
methacrylic acid, tert-butyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0297 |
|
592-41-6 |
356 |
1-hexene |
Monomer or other reactant |
All |
150 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0298 |
|
599-64-4 |
358 |
4-cumylphenol |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0299 |
|
611-99-4 |
359 |
4,4′-dihydroxybenzophenone |
Aid to polymerisation |
All |
|
|
(8) |
|
31 December 2034 |
||||||||||||||||||||
|
0300 |
|
620-67-7 |
360 |
glycerol triheptanoate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0301 |
|
629-11-8 |
361 |
1,6-hexanediol |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0302 |
|
630-08-0 |
362 |
carbon monoxide |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0303 |
|
646-06-0 |
363 |
1,3-dioxolane |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0304 |
|
689-12-3 |
365 |
acrylic acid, isopropyl ester |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2028 |
||||||||||||||||||||
|
0305 |
|
691-37-2 |
366 |
4-methyl-1-pentene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0306 |
|
693-23-2 |
367 |
n-dodecanedioic acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0307 |
|
693-36-7 |
368 |
thiodipropionic acid, dioctadecyl ester |
Additive or polymer production aid |
All |
|
|
(14) |
|
31 December 2034 |
||||||||||||||||||||
|
0308 |
|
693-57-2 |
369 |
12-aminododecanoic acid |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0309 |
|
760-93-0 |
370 |
methacrylic anhydride |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0310 |
|
818-61-1 |
371 |
acrylic acid, monoester with ethyleneglycol |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2034 |
||||||||||||||||||||
|
0311 |
|
822-06-0 |
372 |
hexamethylene diisocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0312 |
|
840-65-3 |
373 |
2,6-naphthalenedicarboxylic acid, dimethyl ester |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0313 |
|
868-77-9 |
374 |
methacrylic acid, monoester with ethyleneglycol |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0314 |
|
872-05-9 |
375 |
1-decene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0315 |
|
872-50-4 |
376 |
N-methylpyrrolidone |
Additive or polymer production aid |
All |
3000 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0316 |
|
919-30-2 |
377 |
3-aminopropyltriethoxysilane |
Additive Polymer production aid |
All |
2,5 |
|
|
Residual extractable content of 3-aminopropyltriethoxysilane to be less than 3 mg/kg filler when used for the reactive surface treatment of inorganic fillers. MTCtap = 2,5 μg/l when used for the surface treatment of materials and products. |
31 December 2034 |
||||||||||||||||||||
|
0317 |
|
923-02-4 |
378 |
N-methylolmethacrylamide |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0318 |
|
924-42-5 |
379 |
N-methylolacrylamide |
Monomer or other reactant |
All |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0319 |
|
925-60-0 |
380 |
acrylic acid, propyl ester |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2028 |
||||||||||||||||||||
|
0320 |
|
931-88-4 |
381 |
cyclooctene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0321 |
|
947-04-6 |
382 |
laurolactam |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0322 |
|
948-65-2 |
383 |
2-phenylindole |
Additive or polymer production aid |
All |
750 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0323 |
|
991-84-4 |
384 |
2,4-bis(octylmercapto)-6-(4- hydroxy–3,5-di-tert-butylanilino)-1,3,5-triazine |
Additive |
All |
1500 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0324 |
|
999-61-1 |
385 |
acrylic acid, 2-hydroxypropyl ester |
Monomer or other reactant |
All |
2,5 - expressed as the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxyisopropyl ester |
|
|
It may contain up to 25 % (w/w) of acrylic acid, 2-hydroxyisopropyl ester (CAS No. 2918-23-2). Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2028 |
||||||||||||||||||||
|
0325 |
|
1034-01-1 |
386 |
gallic acid, octyl ester |
Additive |
All |
|
|
(19) |
|
31 December 2028 |
||||||||||||||||||||
|
0326 |
|
1072-63-5 |
387 |
1-vinylimidazole |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0327 |
|
1120-36-1 |
388 |
1-tetradecene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0328 |
|
1141-38-4 |
389 |
2,6-naphthalenedicarboxylic acid |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0329 |
|
1166-52-5 |
390 |
gallic acid, dodecyl ester |
Additive |
All |
|
|
(19) |
|
31 December 2028 |
||||||||||||||||||||
|
0330 |
|
1187-93-5 |
391 |
perfluoromethyl perfluorovinyl ether |
Monomer or other reactant |
Plastics, coatings, rubber |
0,1 |
|
(38) |
Only to be used in:
-fluoro- and perfluoropolymers intended for products with a CF (S/V ratio) of ≤ 0,0067 dm-1. |
31 December 2028 |
||||||||||||||||||||
|
0331 |
|
1241-94-7 |
392 |
phosphoric acid, diphenyl 2-ethylhexyl ester |
Additive |
All |
120 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0332 |
|
1302-78-9 |
393 |
bentonite |
Additive Polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0333 |
|
1305-62-0 |
394 |
calcium hydroxide |
Additive Polymer production aid Aid to polymerisation |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0334 |
|
1305-78-8 |
395 |
calcium oxide |
Additive Aid to polymerisation |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0335 |
|
1309-42-8 |
396 |
magnesium hydroxide |
Additive |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0336 |
|
1309-48-4 |
397 |
magnesium oxide |
Additive Aid to polymerisation |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0337 |
|
1309-64-4 |
398 |
antimony trioxide |
Additive or polymer production aid |
All |
|
|
For antimony, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
0338 |
|
1310-58-3 |
399 |
potassium hydroxide |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0339 |
|
1310-73-2 |
400 |
sodium hydroxide |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0340 |
|
1313-82-2 |
401 |
sodium sulfide |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0341 |
|
1314-13-2 |
402 |
zinc oxide |
Additive Aid to polymerisation |
All |
|
|
For zinc, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0342 |
|
1314-98-3 |
403 |
zinc sulfide |
Polymer production aid Additive |
All |
|
|
For zinc, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0343 |
|
1317-33-5 |
404 |
molybdenum disulfide |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0344 |
|
1321-74-0 |
405 |
divinylbenzene |
Monomer or other reactant |
All |
0,1 - expressed as the sum of divinylbenzene and ethylvinylbenzene |
|
|
It may contain up to 45 % (w/w) of ethylvinylbenzene. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2034 |
||||||||||||||||||||
|
0345 |
|
1323-39-3 |
406 |
1,2-propyleneglycol monostearate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0346 |
|
1330-80-9 |
408 |
1,2-propyleneglycol monooleate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0347 |
|
1332-58-7 |
410 |
kaolin |
Additive |
All |
|
|
|
Particles can be thinner than 100 nm only if incorporated at a quantity of less than 12 % w/w in an ethylene vinyl alcohol copolymer (EVOH) inner layer of a multi-layer structure, in which the layer in direct contact with the drinking water provides a functional barrier preventing migration of particles into the water. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0348 |
|
1333-86-4 |
411 |
carbon black |
Additive |
All |
|
Polycyclic aromatic hydrocarbons MTCtap = 0,1 μg/l |
|
Primary particles of 10 – 300 nm which are aggregated to a size of 100 – 1 200 nm which may form agglomerates within the size distribution of 300 nm – mm. Toluene extractables: maximum 0,1 %, determined according to ISO method 6209. UV absorption of cyclohexane extract at 386 nm: < 0,02 AU for a 1 cm cell or < 0,1 AU for a 5 cm cell, determined according to a generally recognised method of analysis. Benzo(a)pyrene content: max 0,25 mg/kg carbon black. Maximum use level of carbon black in plastics: 2,5 % w/w. |
31 December 2034 |
||||||||||||||||||||
|
0349 |
|
1335-23-5 |
412 |
copper iodide |
Additive or polymer production aid |
All |
|
|
(6) For copper, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
0350 |
|
1336-21-6 |
413 |
ammonium hydroxide |
Additive Polymer production aid |
All |
|
|
For ammonium, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0351 |
|
1338-39-2 |
414 |
sorbitan monolaurate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0352 |
|
1338-41-6 |
415 |
sorbitan monostearate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0353 |
|
1338-43-8 |
416 |
sorbitan monooleate |
Additive Polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0354 |
|
1343-98-2 |
417 |
silicic acid |
Monomer or other reactant Additive Polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0355 |
|
1344-28-1 |
418 |
aluminium oxide |
Additive Polymer production aid |
All |
|
|
For aluminium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0356 |
|
1401-55-4 |
419 |
tannic acids |
Additive or polymer production aid |
All |
|
|
|
According to the JECFA specifications. |
31 December 2034 |
||||||||||||||||||||
|
0357 |
|
1459-93-4 |
420 |
isophthalic acid, dimethyl ester |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0358 |
|
1477-55-0 |
421 |
1,3-benzenedimethanamine |
Monomer or other reactant |
All |
|
|
(33) |
|
31 December 2034 |
||||||||||||||||||||
|
0359 |
|
1533-45-5 |
422 |
4,4′-bis(2-benzoxazolyl)stilbene |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0360 |
|
1623-05-8 |
423 |
perfluoropropylperfluorovinyl ether |
Monomer or other reactant |
All |
2,5 |
|
(38) |
|
31 December 2028 |
||||||||||||||||||||
|
0361 |
|
1647-16-1 |
424 |
1,9-decadiene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0362 |
|
1663-39-4 |
425 |
acrylic acid, tert-butyl ester |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2034 |
||||||||||||||||||||
|
0363 |
|
1675-54-3 |
426 |
2,2-bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) ether |
Monomer or other reactant (resin) |
All |
450 - expressed as BADGE and its hydrolysis products |
BADGE chlorohydrins MTCtap = 50 μg/l bisphenol-A MTCtap = 2,5 μg/l epichlorohydrin MTCtap = 0,1 μg/l |
(49) |
In compliance with Commission Regulation (EC) No 1895/2005 (OJ L 302, 19.11.2005, p. 28.). |
31 December 2034 |
||||||||||||||||||||
|
0364 |
|
1679-51-2 |
427 |
4-(hydroxymethyl)-1-cyclohexene |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0365 |
|
1709-70-2 |
428 |
1,3,5-trimethyl-2,4,6-tris(3,5-di- tert-butyl-4-hydroxybenzyl)benzene |
Additive |
All |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0366 |
|
1761-71-3 |
429 |
bis(4-aminocyclohexyl)methane |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0367 |
|
1843-03-4 |
430 |
1,1,3-tris(2-methyl-4-hydroxy-5- tert-butylphenyl) butane |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0368 |
|
1843-05-6 |
431 |
2-hydroxy-4-n-octyloxybenzophenone |
Additive Polymer production aid |
All |
|
|
(8) |
|
31 December 2034 |
||||||||||||||||||||
|
0369 |
|
2035-75-8 |
432 |
adipic anhydride |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0370 |
|
2082-79-3 |
433 |
octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate |
Additive Polymer production aid |
All |
300 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0371 |
|
2082-81-7 |
434 |
methacrylic acid, diester with 1,4-butanediol |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0372 |
|
2123-24-2 |
435 |
caprolactam, sodium salt |
Monomer or other reactant |
All |
|
|
(4) |
|
31 December 2034 |
||||||||||||||||||||
|
0373 |
|
2146-71-6 |
436 |
lauric acid, vinyl ester |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0374 |
|
2156-97-0 |
437 |
acrylic acid, dodecyl ester |
|
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0375 |
|
2162-74-5 |
438 |
bis(2,6-diisopropylphenyl) carbodiimide |
Monomer or other reactant |
All |
2,5 - expressed as the sum of bis(2,6-diisopropylphenyl)carbodiimide and its hydrolysis product 2,6-diisopropylaniline |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0376 |
|
2177-70-0 |
439 |
methacrylic acid, phenyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0377 |
|
2210-28-8 |
440 |
methacrylic acid, propyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2028 |
||||||||||||||||||||
|
0378 |
|
2315-68-6 |
441 |
benzoic acid, propyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0379 |
|
2425-79-8 |
442 |
1,4-butanediol bis(2,3-epoxypropyl)ether |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product expressed as epoxy group. Molecular weight of epoxy group is 43 Da. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. |
31 December 2034 |
||||||||||||||||||||
|
0380 |
|
2432-99-7 |
443 |
11-aminoundecanoic acid |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0381 |
|
2440-22-4 |
444 |
2-(2′-hydroxy-5′-methylphenyl)benzotriazole |
Additive or polymer production aid |
All |
|
|
(12) |
|
31 December 2034 |
||||||||||||||||||||
|
0382 |
|
2466-09-3 |
445 |
pyrophosphoric acid |
Monomer or other reactant Polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0383 |
|
2495-35-4 |
446 |
acrylic acid, benzyl ester |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2034 |
||||||||||||||||||||
|
0384 |
|
2495-37-6 |
447 |
methacrylic acid, benzyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2034 |
||||||||||||||||||||
|
0385 |
|
2499-59-4 |
448 |
acrylic acid, n-octyl ester |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2028 |
||||||||||||||||||||
|
0386 |
|
2500-88-1 |
449 |
dioctadecyl disulfide |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0387 |
|
2561-88-8 |
450 |
sebacic anhydride |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0388 |
|
2682-20-4 |
451 |
2-methyl-4-isothiazolin-3-one |
Additive Polymer production aid |
All |
25 |
|
|
Only to be used in aqueous polymer dispersions and emulsions. |
31 December 2034 |
||||||||||||||||||||
|
0389 |
|
2725-22-6 |
452 |
2,4-bis(2,4-dimethylphenyl)-6-(2- hydroxy-4-n-octyloxyphenyl)-1,3,5-triazine |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0390 |
|
2768-02-7 |
453 |
vinyltrimethoxysilane |
Additive Other (processing aid) |
All |
2,5 |
|
|
Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0391 |
|
2855-13-2 |
454 |
1-amino-3-aminomethyl-3,5,5- trimethylcyclohexane |
Monomer or other reactant |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0392 |
|
2867-47-2 |
455 |
methacrylic acid, 2-(dimethylamino)-ethyl ester |
Monomer or other reactant |
All |
0,1 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0393 |
|
2998-08-5 |
456 |
acrylic acid, sec-butyl ester |
Monomer or other reactant |
All |
|
|
(21) |
|
31 December 2028 |
||||||||||||||||||||
|
0394 |
|
2998-18-7 |
457 |
methacrylic acid, sec-butyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2028 |
||||||||||||||||||||
|
0395 |
|
3061-75-4 |
458 |
behenamide |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0396 |
|
3135-18-0 |
459 |
3,5-di-tert-butyl-4-hydroxybenzyl-phosphonic acid, dioctadecyl ester |
Additive or polymer production aid |
All |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2028 |
||||||||||||||||||||
|
0397 |
|
3173-53-3 |
460 |
cyclohexyl isocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0398 |
|
3173-72-6 |
461 |
1,5-naphthalene diisocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0399 |
|
3195-78-6 |
462 |
N-vinyl-N-methylacetamide |
Monomer or other reactant |
All |
1,0 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0400 |
|
3290-92-4 |
463 |
1,1,1-trimethylolpropane trimethacrylate |
Aid to polymerisation |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0401 |
|
3293-97-8 |
464 |
2-hydroxy-4-n-hexyloxybenzophenone |
Additive or polymer production aid |
All |
|
|
(8) |
|
31 December 2028 |
||||||||||||||||||||
|
0402 |
|
3333-62-8 |
465 |
7-[2H-naphtho-(1,2-D)triazol-2-yl]-3-phenylcoumarin |
Additive |
All |
|
|
|
Requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0403 |
|
3648-18-8 |
466 |
di-n-octyltin dilaurate |
Additive Polymer production aid |
All |
|
|
(10) |
|
31 December 2028 |
||||||||||||||||||||
|
0404 |
|
3825-26-1 |
468 |
perfluorooctanoic acid, ammonium salt |
Additive or polymer production aid |
All |
|
|
(38) (39) |
Only to be used in repeated use articles, sintered at high temperatures. |
31 December 2028 |
||||||||||||||||||||
|
0405 |
|
3864-99-1 |
469 |
2-(2′-hydroxy–3,5′-di-tert-butylphenyl)-5-chlorobenzotriazole |
Additive Polymer production aid |
All |
|
For the MTCtap values of degradation products, refer to Table 4. |
(12) |
|
31 December 2028 |
||||||||||||||||||||
|
0406 |
|
3896-11-5 |
470 |
2-(2′-hydroxy-3′-tert-butyl-5′-methylphenyl)-5-chlorobenzotriazole |
Additive or polymer production aid |
All |
|
|
(12) |
|
31 December 2034 |
||||||||||||||||||||
|
0407 |
|
3965-55-7 |
471 |
5-sulfoisophthalic acid, monosodium salt, dimethyl ester |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0408 |
|
4066-02-8 |
472 |
2,2′-methylenebis(4-methyl-6-cyclohexylphenol) |
Additive |
All |
|
|
(5) |
|
31 December 2034 |
||||||||||||||||||||
|
0409 |
|
4074-90-2 |
473 |
adipic acid, divinyl ester |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 5 mg/kg in the product. Only to be used as co-monomer. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2028 |
||||||||||||||||||||
|
0410 |
|
4098-71-9 |
475 |
1-isocyanato-3-isocyanatomethyl- 3,5,5-trimethylcyclohexane |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0411 |
|
4128-73-8 |
476 |
diphenylether–4,4′-diisocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2028 |
||||||||||||||||||||
|
0412 |
|
4130-42-1 |
477 |
2,6-di-tert-butyl-4-ethylphenol |
Polymer production aid Other (processing aid) |
All |
240 |
For the MTCtap values of degradation products, refer to Table 4. |
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2028 |
||||||||||||||||||||
|
0413 |
|
4191-73-5 |
478 |
4-hydroxybenzoic acid, isopropyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0414 |
|
4196-95-6 |
479 |
azelaic anhydride |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0415 |
|
4221-80-1 |
480 |
3,5-di-tert-butyl-4-hydroxybenzoic acid, 2,4-di-tert-butylphenyl ester |
Additive or polymer production aid |
All |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0416 |
|
4422-95-1 |
481 |
1,3,5-benzenetricarboxylic acid trichloride |
Monomer or other reactant |
All |
2,5 - expressed as 1,3,5-benzenetricarboxylic acid |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0417 |
|
4655-34-9 |
482 |
methacrylic acid, isopropyl ester |
Monomer or other reactant |
All |
|
|
(22) |
|
31 December 2028 |
||||||||||||||||||||
|
0418 |
|
4724-48-5 |
483 |
n-octylphosphonic acid |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0419 |
|
4767-03-7 |
484 |
2,2-bis(hydroxymethyl)propionic acid |
Monomer or other reactant |
All |
2,5 |
|
|
Verification of compliance by residual content per drinking water contact surface area (QMA) pending the availability of an analytical method. When used for coatings, only as monomer for polymeric additives. |
31 December 2034 |
||||||||||||||||||||
|
0420 |
|
5124-30-1 |
485 |
dicyclohexylmethane–4,4′-diisocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0421 |
|
5136-44-7 |
486 |
ethylene-N-palmitamide-N′-stearamide |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0422 |
|
5232-99-5 |
487 |
2-cyano–3,3-diphenylacrylic acid, ethyl ester |
Additive Polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0423 |
|
5518-18-3 |
488 |
N,N′-ethylenebispalmitamide |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0424 |
|
5873-54-1 |
490 |
diphenylmethane–2,4′-diisocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0425 |
|
6182-11-2 |
491 |
1,2-propyleneglycol distearate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0426 |
|
6197-30-4 |
492 |
2-cyano–3,3-diphenylacrylic acid, 2-ethylhexyl ester |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0427 |
|
6200-40-4 |
493 |
bis(2-hydroxyethyl)-2-hydroxypropyl-3-(dodecyloxy)methylammonium chloride |
Additive or polymer production aid |
All |
90 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0428 |
|
6303-21-5 |
494 |
hypophosphorous acid |
Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0429 |
|
6642-31-5 |
495 |
6-amino–1,3-dimethyluracil |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0430 |
|
6683-19-8 |
496 |
pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate] |
Additive Polymer production aid |
All |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0431 |
|
6846-50-0 |
497 |
2,2,4-trimethyl–1,3-pentanediol diisobutyrate |
Additive Polymer production aid |
Coatings |
250 |
|
|
Only to be used in coatings. |
31 December 2034 |
||||||||||||||||||||
|
0432 |
|
6864-37-5 |
498 |
3,3′-dimethyl–4,4′-diaminodicyclohexylmethane |
Monomer or other reactant |
Plastics |
2,5 |
|
|
Only to be used in polyamides. |
31 December 2034 |
||||||||||||||||||||
|
0433 |
|
6915-15-7 |
499 |
malic acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
In case of use as a monomer only to be used as a co-monomer in aliphatic polyesters up to maximum level of 1 % on a molar basis, except when used for coatings. |
31 December 2034 |
||||||||||||||||||||
|
0434 |
|
7128-64-5 |
500 |
2,5-bis(5-tert-butyl-2-benzoxazolyl)thiophene |
Additive Polymer production aid |
All |
30 |
|
|
Requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex 1 of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0435 |
|
7456-68-0 |
502 |
4,4′-oxybis(benzenesulfonyl azide) |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0436 |
|
7585-39-9 |
503 |
β-dextrin |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0437 |
|
7631-90-5 |
505 |
sodium bisulfite |
Additive or polymer production aid |
All |
|
|
(18) |
|
31 December 2034 |
||||||||||||||||||||
|
0438 |
|
7632-00-0 |
506 |
sodium nitrite |
Additive or polymer production aid |
All |
30 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0439 |
|
7647-01-0 |
507 |
hydrochloric acid |
Additive or polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0440 |
|
7647-15-6 |
508 |
sodium bromide |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0441 |
|
7664-38-2 |
509 |
phosphoric acid |
Monomer or other reactant Polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0442 |
|
7664-41-7 |
510 |
ammonia |
Monomer or other reactant Other (processing aid) |
All |
|
|
For ammonium, refer to Annex V. |
|
31 December 2037 |
||||||||||||||||||||
|
0443 |
|
7681-11-0 |
512 |
potassium iodide |
Additive or polymer production aid |
All |
|
|
(6) |
|
31 December 2034 |
||||||||||||||||||||
|
0444 |
|
7681-82-5 |
513 |
sodium iodide |
Additive or polymer production aid |
All |
|
|
(6) |
|
31 December 2034 |
||||||||||||||||||||
|
0445 |
|
7757-83-7 |
516 |
sodium sulfite |
Additive or polymer production aid |
All |
|
|
(18) |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0446 |
|
7758-02-3 |
517 |
potassium bromide |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0447 |
|
7782-42-5 |
521 |
graphite |
Additive |
All |
|
Polycyclic aromatic hydrocarbons MTCtap = 0,1 μg/l |
|
Graphites according to EUPL Number 2039, Annex IV. |
31 December 2034 |
||||||||||||||||||||
|
0448 |
|
7782-50-5 |
522 |
chlorine |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0449 |
|
7787-70-4 |
523 |
copper bromide |
Additive or polymer production aid |
All |
|
|
(6) For copper, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0450 |
|
8001-22-7 |
524 |
soybean oil |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0451 |
|
8001-39-6 |
525 |
Japan wax |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0452 |
|
8001-75-0 |
526 |
ceresin |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0453 |
|
8001-79-4 |
527 |
castor oil |
Monomer or other reactant (base oil) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0454 |
|
8002-43-5 |
528 |
lecithin |
Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0455 |
|
8002-53-7 |
529 |
montan wax |
Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0456 |
|
8006-44-8 |
530 |
candelilla wax |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0457 |
|
8012-89-3 |
531 |
beeswax |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0458 |
|
8013-07-8 |
532 |
soybean oil, epoxidised |
Monomer or other reactant Other (processing aid) |
All |
1500 |
|
(31) |
Oxirane < 8 %, iodine number < 6. |
31 December 2034 |
||||||||||||||||||||
|
0459 |
|
8015-86-9 |
533 |
carnauba wax |
Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0460 |
|
8017-16-1 |
534 |
polyphosphoric acids |
Monomer or other reactant Additive Polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0461 |
|
8050-09-7 |
535 |
rosin |
Monomer or other reactant Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0462 |
|
8050-15-5 |
536 |
rosin, hydrogenated, ester with methanol |
Additive |
All, except rubber |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0463 |
|
8050-26-8 |
537 |
rosin, ester with pentaerythritol |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0464 |
|
8050-31-5 |
538 |
rosin, ester with glycerol |
Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0465 |
|
8052-10-6 |
539 |
rosin tall oil |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0466 |
|
8062-15-5 |
540 |
lignosulfonic acid |
Additive or polymer production aid |
Plastics |
12 |
|
|
Only to be used as dispersant for plastics dispersions. |
31 December 2028 |
||||||||||||||||||||
|
0467 |
|
9000-01-5 |
541 |
gum arabic |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0468 |
|
9000-11-7 |
542 |
carboxymethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0469 |
|
9000-16-2 |
543 |
dammar |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0470 |
|
9000-30-0 |
544 |
guar gum |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0471 |
|
9000-65-1 |
545 |
tragacanth gum |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0472 |
|
9000-69-5 |
546 |
pectin |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0473 |
|
9000-70-8 |
547 |
gelatin |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0474 |
|
9000-71-9 |
548 |
casein |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0475 |
|
9002-88-4 |
549 |
polyethylene wax |
Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0476 |
|
9003-07-0 |
550 |
polypropylene wax |
Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0477 |
|
9003-39-8 |
552 |
polyvinylpyrrolidone |
Monomer or other reactant |
All |
|
|
|
The substance shall meet the purity criteria as laid down in Commission Directive 2008/84/EC. |
31 December 2037 |
||||||||||||||||||||
|
0478 |
|
9004-34-6 |
553 |
cellulose |
Monomer or other reactant Additive |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0479 |
|
9004-36-8 |
554 |
cellulose acetate butyrate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0480 |
|
9004-57-3 |
555 |
ethylcellulose |
Monomer or other reactant Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0481 |
|
9004-58-4 |
556 |
ethylhydroxyethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0482 |
|
9004-59-5 |
557 |
methylethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0483 |
|
9004-62-0 |
558 |
hydroxyethylcellulose |
Additive Polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0484 |
|
9004-64-2 |
559 |
hydroxypropylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0485 |
|
9004-65-3 |
560 |
methylhydroxypropylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0486 |
|
9004-67-5 |
561 |
methylcellulose |
Polymer production aid Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0487 |
|
9004-70-0 |
562 |
nitrocellulose |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0488 |
|
9004-97-1 |
563 |
polyethyleneglycol monoricinoleate |
Additive or polymer production aid |
All |
2100 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0489 |
|
9005-25-8 |
564 |
starch, edible |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0490 |
|
9005-27-0 |
565 |
hydroxyethyl starch |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0491 |
|
9005-32-7 |
566 |
alginic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0492 |
|
9005-37-2 |
567 |
1,2-propyleneglycol alginate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0493 |
|
9005-64-5 |
568 |
polyethyleneglycol sorbitan monolaurate |
Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0494 |
|
9005-65-6 |
569 |
polyethyleneglycol sorbitan monooleate |
Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0495 |
|
9005-66-7 |
570 |
polyethyleneglycol sorbitan monopalmitate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0496 |
|
9005-67-8 |
571 |
polyethyleneglycol sorbitan monostearate |
Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0497 |
|
9005-70-3 |
572 |
polyethyleneglycol sorbitan trioleate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0498 |
|
9005-71-4 |
573 |
polyethyleneglycol sorbitan tristearate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0499 |
|
9006-04-6 |
574 |
rubber, natural |
Monomer or other reactant Additive |
All |
|
|
|
At recovery and coagulation of the natural rubber, ammonia, formic acid, acetic acid and sodium bisulfite may be used. Other additives of the natural rubber must be listed in the positive list. |
31 December 2028 |
||||||||||||||||||||
|
0500 |
|
9032-42-2 |
576 |
hydroxyethylmethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0501 |
|
9044-17-1 |
577 |
isobutylene-butene copolymer |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0502 |
|
9046-01-9 |
578 |
polyethyleneglycol tridecyl ether phosphate |
Additive or polymer production aid |
All |
250 |
|
|
Polyethyleneglycol (EO < 11) tridecyl ether phosphate (mono-and dialkyl ester) with a maximum 10 % content of polyethyleneglycol (EO < 11) tridecylether. |
31 December 2028 |
||||||||||||||||||||
|
0503 |
|
9049-76-7 |
579 |
hydroxypropyl starch |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0504 |
|
10016-20-3 |
580 |
α-dextrin |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0505 |
|
10022-31-8 |
581 |
barium nitrate |
Additive or polymer production aid |
All |
|
|
For barium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0506 |
|
10039-33-5 |
582 |
di-n-octyltin bis(2-ethylhexyl maleate) |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2034 |
||||||||||||||||||||
|
0507 |
|
10043-11-5 |
583 |
boron nitride |
Additive |
All |
|
|
For boron, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2037 |
||||||||||||||||||||
|
0508 |
|
10043-35-3 |
584 |
boric acid |
Monomer or other reactant Additive |
All |
|
|
For boron, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
0509 |
|
10094-45-8 |
587 |
octadecylerucamide |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0510 |
|
10436-08-5 |
589 |
cis-11-eicosenamide |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0511 |
|
10595-80-9 |
590 |
methacrylic acid, 2-sulfoethyl ester |
Monomer or other reactant |
All |
0,1 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2034 |
||||||||||||||||||||
|
0512 |
|
10605-09-1 |
591 |
ascorbyl stearate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0513 |
|
11097-59-9 |
592 |
aluminium magnesium carbonate hydroxide |
Additive |
All |
|
|
For aluminium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0514 |
|
11132-73-3 |
595 |
lignocellulose |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0515 |
|
11138-66-2 |
596 |
xanthan gum |
Additive Polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0516 |
|
12001-26-2 |
597 |
mica |
Additive |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0517 |
|
12007-55-5 |
599 |
barium tetraborate |
Additive or polymer production aid |
All |
|
|
For barium and boron, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
0518 |
|
12072-90-1 |
600 |
hydromagnesite |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0519 |
|
12124-97-9 |
601 |
ammonium bromide |
Additive or polymer production aid |
All |
|
|
For ammonium, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
0520 |
|
12198-93-5 |
602 |
ozokerite |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0521 |
|
12269-78-2 |
603 |
pyrophyllite |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0522 |
|
12304-65-3 |
604 |
hydrotalcite |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0523 |
|
12542-30-2 |
605 |
acrylic acid, dicyclopentenyl ester |
Monomer or other reactant |
All |
2,5 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2034 |
||||||||||||||||||||
|
0524 |
|
13003-12-8 |
608 |
4,4′-butylidene-bis(6-tert-butyl-3- methylphenyl-ditridecyl phosphite) |
Additive or polymer production aid |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0525 |
|
13445-56-2 |
609 |
pyrophosphorous acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0526 |
|
13560-49-1 |
611 |
3-aminocrotonic acid, diester with thiobis (2-hydroxyethyl) ether |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0527 |
|
13811-50-2 |
612 |
N,N′-divinyl-2-imidazolidinone |
Monomer or other reactant |
All |
2,5 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. |
31 December 2034 |
||||||||||||||||||||
|
0528 |
|
13983-17-0 |
613 |
wollastonite |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0529 |
|
14464-46-1 |
614 |
cristobalite |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0530 |
|
14807-96-6 |
615 |
talc |
Additive Polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2037 |
||||||||||||||||||||
|
0531 |
|
14808-60-7 |
616 |
quartz |
Additive Polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0532 |
|
15214-89-8 |
617 |
2-acrylamido-2-methylpropanesul phonic acid |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0533 |
|
15535-79-2 |
618 |
di-n-octyltin mercaptoacetate |
Aid to polymerisation |
All |
|
|
(10) |
|
31 December 2034 |
||||||||||||||||||||
|
0534 |
|
15571-58-1 |
619 |
di-n-octyltin bis(2-ethylhexyl mercaptoacetate) |
Aid to polymerisation |
All |
|
|
(10) |
|
31 December 2028 |
||||||||||||||||||||
|
0535 |
|
15571-60-5 |
620 |
di-n-octyltin dimaleate |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2028 |
||||||||||||||||||||
|
0536 |
|
16219-75-3 |
621 |
5-ethylidenebicyclo[2,2,1]hept-2-ene |
Monomer or other reactant |
All |
2,5 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of analytical method for migration testing. It can only be used for products with a CF (S/V ratio) of ≤ 2dm-1. |
31 December 2034 |
||||||||||||||||||||
|
0537 |
|
16260-09-6 |
622 |
oleylpalmitamide |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0538 |
|
16389-88-1 |
623 |
dolomite |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0539 |
|
16712-64-4 |
624 |
6-hydroxy-2-naphthalenecarboxylic acid |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0540 |
|
18641-57-1 |
626 |
glycerol tribehenate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0541 |
|
19569-21-2 |
627 |
huntite |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0542 |
|
20427-58-1 |
628 |
zinc hydroxide |
Additive or polymer production aid |
All |
|
|
For zinc, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0543 |
|
21645-51-2 |
629 |
aluminium hydroxide |
Additive |
All |
|
|
For aluminium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0544 |
|
22788-19-8 |
630 |
1,2-propyleneglycol dilaurate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0545 |
|
23128-74-7 |
631 |
1,6-hexamethylene-bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionamide) |
Additive Polymer production aid |
All |
2250 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0546 |
|
23676-09-7 |
632 |
4-ethoxybenzoic acid, ethyl ester |
Additive or polymer production aid |
All |
180 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0547 |
|
23949-66-8 |
633 |
2-ethoxy-2′-ethyloxanilide |
Additive or polymer production aid |
All |
1500 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0548 |
|
24800-44-0 |
634 |
tripropyleneglycol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0549 |
|
25134-51-4 |
636 |
acrylic acid, acrylic acid, 2-ethylhexyl ester, copolymer |
Additive or polymer production aid |
All |
2,5 - expressed as acrylic acid, 2-ethylhexyl ester |
|
(21) |
|
31 December 2037 |
||||||||||||||||||||
|
0550 |
|
25151-96-6 |
637 |
pentaerythritol dioleate |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0551 |
|
25322-69-4 |
639 |
polypropyleneglycol |
Monomer or other reactant Aid to polymerisation |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0552 |
|
25359-91-5 |
640 |
formaldehyde-1-naphthol, copolymer |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0553 |
|
25736-61-2 |
642 |
maleic anhydride-styrene, copolymer, sodium salt |
Additive or polymer production aid |
All |
|
|
|
The fraction with molecular weight below 1 000 Da shall not exceed 0,05 % (w/w). |
31 December 2037 |
||||||||||||||||||||
|
0554 |
|
26266-57-9 |
643 |
sorbitan monopalmitate |
Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0555 |
|
26266-58-0 |
644 |
sorbitan trioleate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0556 |
|
26401-86-5 |
645 |
mono-n-octyltin tris(isooctyl mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(11) |
|
31 December 2034 |
||||||||||||||||||||
|
0557 |
|
26401-97-8 |
646 |
di-n-octyltin bis(isooctyl mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2034 |
||||||||||||||||||||
|
0558 |
|
26402-23-3 |
647 |
glycerol monohexanoate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0559 |
|
26402-26-6 |
648 |
glycerol monooctanoate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0560 |
|
26427-07-6 |
649 |
dibutylthiostannoic acid polymer |
Additive or polymer production aid |
All |
|
|
|
Molecular unit = (C8H18S3Sn2)n (n = 1,5-2). |
31 December 2034 |
||||||||||||||||||||
|
0561 |
|
26636-01-1 |
650 |
dimethyltin bis(isooctyl mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(9) |
|
31 December 2028 |
||||||||||||||||||||
|
0562 |
|
26658-19-5 |
651 |
sorbitan tristearate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0563 |
|
26741-53-7 |
652 |
bis(2,4-di-tert-butylphenyl) pentaerythritol diphosphite |
Additive or polymer production aid |
All |
30 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0564 |
|
26747-90-0 |
653 |
2,4-toluene diisocyanate dimer |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0565 |
|
26836-47-5 |
654 |
sorbitol monostearate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0566 |
|
26896-48-0 |
655 |
tricyclodecanedimethanol |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0567 |
|
26914-43-2 |
656 |
styrenesulfonic acid |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0568 |
|
27107-89-7 |
657 |
mono-n-octyltin tris(2-ethylhexyl mercaptoacetate) |
Aid to polymerisation |
All |
|
|
(11) |
|
31 December 2034 |
||||||||||||||||||||
|
0569 |
|
27176-87-0 |
658 |
dodecylbenzenesulfonic acid |
Monomer or other reactant |
All |
1500 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0570 |
|
27194-74-7 |
659 |
1,2-propyleneglycol monolaurate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0571 |
|
27458-90-8 |
660 |
di-tert-dodecyl disulfide |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0572 |
|
27676-62-6 |
661 |
1,3,5-tris(3,5-di-tert-butyl-4-hydroxybenzyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione |
Additive or polymer production aid |
All |
250 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0573 |
|
27955-94-8 |
662 |
1,1,1-tris(4-hydroxyphenol)ethane |
Monomer or other reactant |
Plastics |
0,25 |
|
|
Only to be used in polycarbonates, except when used for coatings. |
31 December 2034 |
||||||||||||||||||||
|
0574 |
|
28290-79-1 |
663 |
linolenic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0575 |
|
28931-67-1 |
664 |
trimethylolpropane trimethacrylate-methyl methacrylate copolymer |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0576 |
|
29013-28-3 |
665 |
1,2-propyleneglycol monopalmitate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0577 |
|
29116-98-1 |
666 |
sorbitan dioleate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0578 |
|
29204-02-2 |
667 |
gadoleic acid |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0579 |
|
29894-35-7 |
668 |
polyglycerol ricinoleate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0580 |
|
30233-64-8 |
669 |
glycerol monobehenate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0581 |
|
30899-62-8 |
670 |
glycerol monolaurate diacetate |
Additive or polymer production aid |
All |
|
|
(31) |
|
31 December 2034 |
||||||||||||||||||||
|
0582 |
|
31570-04-4 |
671 |
phosphorous acid, tris(2,4-di-tert-butylphenyl)ester |
Additive Polymer production aid |
All |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0583 |
|
31831-53-5 |
672 |
polyester of 1,4-butanediol with caprolactone |
Additive or polymer production aid |
All |
|
|
(28) (29) |
The fraction with molecular weight below 1 000 Da shall not exceed 0,5 % (w/w). |
31 December 2034 |
||||||||||||||||||||
|
0584 |
|
32509-66-3 |
673 |
ethylene glycol bis[3,3-bis(3-tert-butyl-4-hydroxyphenyl)butyrate] |
Additive or polymer production aid |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0585 |
|
32647-67-9 |
674 |
dibenzylidene sorbitol |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0586 |
|
32687-78-8 |
675 |
N,N′-bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionyl)hydrazide |
Additive |
All |
750 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0587 |
|
33568-99-9 |
676 |
di-n-octyltin bis(isooctyl maleate) |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2028 |
||||||||||||||||||||
|
0588 |
|
33587-20-1 |
677 |
1,2-propyleneglycol dipalmitate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0589 |
|
35074-77-2 |
678 |
1,6-hexamethylene-bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) |
Additive |
All |
300 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0590 |
|
35958-30-6 |
679 |
1,1-bis(2-hydroxy–3,5-di-tert-butylphenyl)ethane |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0591 |
|
36443-68-2 |
680 |
triethyleneglycol bis[3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionate] |
Additive or polymer production aid |
All |
450 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0592 |
|
36653-82-4 |
681 |
1-hexadecanol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0593 |
|
37205-99-5 |
682 |
ethylcarboxymethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0594 |
|
37206-01-2 |
683 |
methylcarboxymethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0595 |
|
37244-96-5 |
684 |
nepheline syenite |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0596 |
|
37296-97-2 |
685 |
silicic acid, magnesium-sodium-fluoride salt |
Additive |
All |
|
|
For fluoride, refer to Annex V. |
Only to be used in multi-layer materials for layers not coming into direct contact with drinking water, ecxept when used for coatings. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0597 |
|
37353-59-6 |
686 |
hydroxymethylcellulose |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0598 |
|
38103-06-9 |
687 |
2,2-bis(4-hydroxyphenyl)propane bis(phthalic anhydride) |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0599 |
|
38613-77-3 |
688 |
tetrakis(2,4-di-tert-butyl-phenyl)-4,4′-biphenylylene diphosphonite |
Additive Polymer production aid |
All |
900 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0600 |
|
40601-76-1 |
689 |
1,3,5-tris(4-tert-butyl-3-hydroxy-2,6-dimethylbenzyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione |
Additive or polymer production aid |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0601 |
|
41484-35-9 |
690 |
thiodiethanol bis(3-(3,5-di-tert-butyl-4-hydroxy phenyl)propionate) |
Additive |
All |
120 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0602 |
|
47465-97-4 |
691 |
3,3-bis(3-methyl-4-hydroxyphenyl)2-indolinone |
Monomer or other reactant |
All |
90 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0603 |
|
52047-59-3 |
692 |
2-(4-dodecylphenyl)indole |
Additive or polymer production aid |
All |
3,0 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0604 |
|
54140-20-4 |
693 |
sorbitan tripalmitate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0605 |
|
54276-35-6 |
694 |
methacrylic acid, sulfopropyl ester |
Monomer or other reactant |
All |
2,5 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2028 |
||||||||||||||||||||
|
0606 |
|
54849-38-6 |
695 |
monomethyltin tris(isooctyl mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(9) |
|
31 December 2028 |
||||||||||||||||||||
|
0607 |
|
57569-40-1 |
696 |
terephthalic acid, diester with 2,2′-methylenebis(4-methyl-6-tert-butylphenol) |
Additive or polymer production aid |
All |
|
|
(13) |
|
31 December 2028 |
||||||||||||||||||||
|
0608 |
|
57583-34-3 |
697 |
monomethyltin tris(ethylhexyl mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(9) |
|
31 December 2028 |
||||||||||||||||||||
|
0609 |
|
57583-35-4 |
698 |
dimethyltin bis(ethylhexyl mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(9) |
|
31 December 2028 |
||||||||||||||||||||
|
0610 |
|
58446-52-9 |
699 |
stearoylbenzoylmethane |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0611 |
|
61167-58-6 |
700 |
acrylic acid, 2-tert-butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl ester |
Additive or polymer production aid |
All |
300 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0612 |
|
61269-61-2 |
701 |
N,N′-bis(2,2,6,6-tetramethyl-4-piperidyl)hexamethylenediamine-1,2-dibromoethane, copolymer |
Additive or polymer production aid |
All |
120 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0613 |
|
61752-68-9 |
702 |
sorbitan tetrastearate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0614 |
|
61788-47-4 |
703 |
fatty acids, coco |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0615 |
|
61788-85-0 |
704 |
polyethyleneglycol ester of hydrogenated castor oil |
Additive Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0616 |
|
61788-89-4 |
705 |
acids, fatty, unsaturated (C18), dimers, non hydrogenated, distilled and non-distilled |
Monomer or other reactant Other (processing aid) |
All |
|
|
(17) |
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2034 |
||||||||||||||||||||
|
0617 |
|
61790-12-3 |
706 |
fatty acids, tall oil |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0618 |
|
61790-53-2 |
707 |
diatomaceous earth |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0619 |
|
61791-12-6 |
708 |
polyethyleneglycol ester of castor oil |
Additive Polymer production aid Other (processing aid) |
All |
2100 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0620 |
|
62568-11-0 |
709 |
sorbitan monobehenate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0621 |
|
63397-60-4 |
710 |
bis(2-carbobutoxyethyl)tin-bis(isooctyl mercaptoacetate) |
Additive or polymer production aid |
All |
900 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0622 |
|
63438-80-2 |
711 |
(2-carbobutoxyethyl)tin-tris(isooctyl mercaptoacetate) |
Additive or polymer production aid |
All |
1500 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0623 |
|
64147-40-6 |
712 |
castor oil, dehydrated |
Monomer or other reactant (base oil) |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0624 |
|
64365-11-3 7440-44-0 |
713 |
charcoal, activated |
Additive or polymer production aid |
Plastics |
|
|
|
Only for use in PET at maximum 10 mg/kg of polymer. Same purity requirements as for Vegetable Carbon (E 153) set out by Commission Regulation (EU) No 231/2012 with exception of ash content which can be up to 10 % (w/w). |
31 December 2028 |
||||||||||||||||||||
|
0625 |
|
64365-17-9 |
714 |
rosin, hydrogenated, ester with pentaerythritol |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0626 |
|
65140-91-2 |
715 |
3,5-di-tert-butyl-4-hydroxybenzyl phosphonic acid, monoethyl ester, calcium salt |
Additive or polymer production aid |
All |
300 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0627 |
|
65447-77-0 |
716 |
1-(2-hydroxyethyl)-4-hydroxy-2,2,6,6-tetramethyl piperidine-succinic acid, dimethyl ester, copolymer |
Additive or polymer production aid |
All |
1 500 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0628 |
|
65997-06-0 |
717 |
rosin, hydrogenated |
Additive |
All, except rubber |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0629 |
|
65997-13-9 |
718 |
rosin, hydrogenated, ester with glycerol |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0630 |
|
66822-60-4 |
719 |
N-methacryloyloxyethyl-N,N-dimethyl-N-carboxymethyl-ammonium chloride, sodium salt-octadecyl methacrylate-ethyl methacrylate-cyclohexyl methacrylate-N-vinyl-2-pyrrolidone, copolymers |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0631 |
|
67649-65-4 |
720 |
mono-n-dodecyltin tris(isooctyl mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(24) |
|
31 December 2028 |
||||||||||||||||||||
|
0632 |
|
67845-93-6 |
721 |
3,5-di-tert-butyl-4-hydroxybenzoic acid, hexadecyl ester |
Additive or polymer production aid |
All |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0633 |
|
68308-53-2 |
722 |
fatty acids, soya |
Monomer or other reactant (base oil) |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0634 |
|
68412-29-3 |
723 |
starch, hydrolysed |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0635 |
|
68425-17-2 |
724 |
syrups, hydrolysed starch, hydrogenated |
Monomer or other reactant |
All |
|
|
|
In compliance with the purity criteria for maltitol syrup E 965(ii) as laid down in Commission Directive 2008/60/EC. |
31 December 2034 |
||||||||||||||||||||
|
0636 |
|
68442-12-6 |
726 |
Reaction products of oleic acid, 2-mercaptoethyl ester, with dichlorodimethyltin, sodium sulfide and trichloromethyltin |
Additive or polymer production aid |
All |
|
|
(9) |
|
31 December 2028 |
||||||||||||||||||||
|
0637 |
|
68442-85-3 |
727 |
cellulose, regenerated |
Monomer or other reactant Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0638 |
|
68515-49-1 26761-40-0 |
729 |
phthalic acid, diesters with primary, saturated C9-C11 alcohols more than 90 % C10 (DNIP) |
Additive Polymer production aid |
All |
|
|
(25) (31) |
Only to be used as:
Not to be used in combination substances with EUPL Numbers 0103, 0105, 0225 or Diisobutyl phthalate (synonyms 1,2-bis(2-methylpropyl) benzene–1,2-dicarboxylate or ‘DIBP’) with CAS Number 84-69-5. |
31 December 2037 |
||||||||||||||||||||
|
0639 |
|
68554-70-1 |
730 |
methylsilsesquioxane |
Monomer or other reactant (base oil) Additive Polymer production aid |
All |
|
|
|
Residual monomer in methylsilsesquioxane: < 1 mg methyltrimethoxysilane/kg of methylsilsesquioxane. |
31 December 2028 |
||||||||||||||||||||
|
0640 |
|
68564-88-5 |
731 |
N-heptylaminoundecanoic acid |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0641 |
|
68610-51-5 |
732 |
p-cresol-dicyclopentadiene-isobutylene, copolymer |
Additive (polymeric) |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0642 |
|
68783-41-5 |
733 |
acids, fatty, unsaturated (C18), dimers, hydrogenated, distilled and non-distilled |
Monomer or other reactant Other (processing aid) |
All |
|
|
(17) |
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2034 |
||||||||||||||||||||
|
0643 |
|
68951-50-8 |
735 |
bis(polyethyleneglycol)hydroxymethylphosphonate |
Additive or polymer production aid |
All |
30 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0644 |
|
69226-44-4 |
736 |
di-n-octyltin ethyleneglycol bis(mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2037 |
||||||||||||||||||||
|
0645 |
|
70142-34-6 |
737 |
polyethyleneglycol-30 dipolyhydroxystearate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0646 |
|
70321-86-7 |
738 |
2-[2-hydroxy–3,5-bis(1,1-dimethylbenzyl)phenyl]benzotriazole |
Additive or polymer production aid |
All |
75 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0647 |
|
70331-94-1 |
739 |
2,2′-oxamidobis[ethyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate] |
Additive or polymer production aid |
All |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0648 |
|
71878-19-8 |
740 |
poly[6-[(1,1,3,3-tetramethyl-butyl)amino]-1,3,5-triazine–2,4-diyl]-[(2,2,6,6-tetramethyl-4-piperidyl)-imino]hexamethylene[(2,2,6,6-tetramethyl-4-piperidyl) imino] |
Additive Polymer production aid |
All |
150 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0649 |
|
78301-43-6 |
742 |
2,2,4,4-tetramethyl-20-(2,3-epoxy propyl)-7-oxa–3,20-diazadispiro-[5.1.11.2]-heneicosan-21-one, polymer |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0650 |
|
79072-96-1 |
743 |
bis(4-ethylbenzylidene)sorbitol |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0651 |
|
80181-31-3 |
744 |
3-hydroxybutanoic acid-3-hydroxypentanoic acid, copolymer |
Monomer or other reactant |
All |
|
|
(34) |
The substance is used as product obtained by bacterial fermentation. In compliance with the specifications mentioned in the Table 4 of Annex I of Commission Regulation (EU) No 10/2011. |
31 December 2028 |
||||||||||||||||||||
|
0652 |
|
80410-33-9 |
745 |
2,2′,2′-nitrilo(triethyl tris(3,3′,5,5′-tetra-tert-butyl-1,1′-bi-phenyl-2,2′-diyl)phosphite) |
Additive or polymer production aid |
All |
250 - expressed as sum of phosphite and phosphate |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0653 |
|
80693-00-1 |
746 |
bis(2,6-di-tert-butyl-4-methylphenyl)pentaerythritol diphosphite |
Additive or polymer production aid |
All |
250 - expressed as sum of phosphite and phosphate |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0654 |
|
84030-61-5 |
747 |
di-n-dodecyltin bis(isooctyl mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(24) |
|
31 December 2028 |
||||||||||||||||||||
|
0655 |
|
84434-12-8 |
748 |
N-(2-aminoethyl)-β-alanine, sodium salt |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0656 |
|
85209-91-2 |
749 |
2,2′-methylene bis(4,6-di-tert-butylphenyl) sodium phosphate |
Additive or polymer production aid |
All |
250 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2034 |
||||||||||||||||||||
|
0657 |
|
85209-93-4 |
750 |
2,2′-methylenebis(4,6-di-tert-butylphenyl) lithium phosphate |
Additive or polymer production aid |
All |
250 |
|
For lithium, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
0658 |
|
87189-25-1 |
751 |
poly(zinc glycerolate) |
Additive or polymer production aid |
All |
|
|
For zinc, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0659 |
|
87826-41-3 69158-41-4 54686-97-4 81541-12-0 |
752 |
bis(methylbenzylidene)sorbitol |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0660 |
|
92704-41-1 |
753 |
kaolin, calcined |
Additive |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0661 |
|
99880-64-5 |
754 |
glycerol dibehenate |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0662 |
|
106246-33-7 |
755 |
4,4′-methylenebis(3-chloro–2,6-diethylaniline) |
Monomer or other reactant |
All |
2,5 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2034 |
||||||||||||||||||||
|
0663 |
|
110553-27-0 |
756 |
2,4-bis(octylthiomethyl)-6-methyllphenol |
Additive |
All |
|
|
(23) |
|
31 December 2034 |
||||||||||||||||||||
|
0664 |
|
110638-71-6 |
757 |
vermiculite, reaction product with citric acid, lithium salt |
Additive or polymer production aid |
All |
|
|
For lithium, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0665 |
|
110675-26-8 |
758 |
2,4-bis(dodecylthiomethyl)-6-methylphenol |
Additive or polymer production aid |
All |
|
|
(23) |
|
31 December 2034 |
||||||||||||||||||||
|
0666 |
|
118337-09-0 |
759 |
2,2′-ethylidenebis(4,6-di-tert-butylphenyl) fluorophosphonite |
Additive or polymer production aid |
All |
300 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0667 |
|
119345-01-6 |
760 |
Reaction product of di-tert-butylphosphonite with biphenyl, obtained by condensation of 2,4-di-tert-butylphenol with Friedel Craft reaction product of phosphorous trichloride and biphenyl |
Additive or polymer production aid |
All |
900 |
For the MTCtap values of degradation products, refer to Table 4. |
|
Composition:
Other specifications:
|
31 December 2034 |
||||||||||||||||||||
|
0668 |
|
120218-34-0 |
761 |
thiodiethanolbis(5-methoxycarbonyl–2,6-dimethyl–1,4-dihydropyridine-3-carboxylate) |
Additive or polymer production aid |
All |
300 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0669 |
|
123968-25-2 |
762 |
acrylic acid, 2,4-di-tert-pentyl-6-(1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl)phenyl ester |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0670 |
|
129228-21-3 |
763 |
3,3-bis(methoxymethyl)–2,5-dimethylhexane |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0671 |
|
132459-54-2 |
764 |
N,N′-bis[4-(ethoxycarbonyl)phenyl]-1,4,5,8-naphthalenetetracarboxydiimide |
Monomer or other reactant |
Plastics |
2,5 |
|
|
Purity > 98,1 % (w/w). Only to be used as co-monomer (max 4 %) for polyesters (PET, PBT). |
31 December 2028 |
||||||||||||||||||||
|
0672 |
|
134701-20-5 |
765 |
2,4-dimethyl-6-(1-methylpentadecyl)phenol |
Additive or polymer production aid |
All |
50 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0673 |
|
135861-56-2 |
766 |
bis(3,4-dimethylbenzylidene)sorbitol |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0674 |
|
136504-96-6 |
767 |
1,2-bis(3-aminopropyl)ethylene diamine, polymer with N-butyl-2,2,6,6-tetramethyl-4-piperidinamine and 2,4,6-trichloro-1,3,5-triazine |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0675 |
|
143925-92-2 |
768 |
amines, bis(hydrogenated tallow alkyl) oxidised |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in:
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2034 |
||||||||||||||||||||
|
0676 |
|
145650-60-8 |
769 |
phosphorous acid, bis(2,4-di-tert-butyl-6-methylphenyl) ethyl ester |
Additive or polymer production aid |
All |
250 - expressed as sum of phosphite and phosphate |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0677 |
|
147315-50-2 |
770 |
2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-(hexyloxy)phenol |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0678 |
|
151841-65-5 |
771 |
aluminium hydroxybis [2,2′-methylenebis (4,6-di-tert-butylphenyl) phosphate] |
Additive or polymer production aid |
All |
250 |
For the MTCtap values of degradation products, refer to Table 4. |
For aluminium, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0679 |
|
153250-52-3 |
772 |
N,N′-dicyclohexyl-2,6-naphthalene dicarboxamide |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0680 |
|
154862-43-8 |
773 |
bis(2,4-dicumylphenyl)pentaerythritol-diphosphite |
Additive or polymer production aid |
All |
250 - expressed as sum of the substance itself, its oxidised form bis(2,4-dicumylphenyl)pentaerythritol-phosphate and its hydrolysis product (2,4-dicumylphenol) |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0681 |
|
161717-32-4 |
774 |
2,4,6-tris(tert-butyl)phenyl-2-butyl-2-ethyl-1,3-propanediol phosphite |
Additive or polymer production aid |
All |
100 - expressed as sum of phosphite, phosphate and the hydrolysis product = TTBP |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0682 |
|
166412-78-8 |
775 |
1,2-cyclohexanedicarboxylic acid, diisononyl ester |
Additive Polymer production aid |
All |
|
|
(31) |
|
31 December 2034 |
||||||||||||||||||||
|
0683 |
|
167883-16-1 |
776 |
polydimethylsiloxane, 3-aminopropyl terminated, polymer with dicyclohexylmethane–4,4′- diisocyanate |
Additive or polymer production aid |
All |
|
|
|
The fraction with molecular weight below 1 000 Da shall not exceed 1,5 % (w/w). |
31 December 2034 |
||||||||||||||||||||
|
0684 |
|
174254-23-0 |
777 |
acrylic acid, methyl ester, telomer with 1-dodecanethiol, C16-C18 alkyl esters |
Additive or polymer production aid |
All |
|
|
|
0,5 % in the product. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2028 |
||||||||||||||||||||
|
0685 |
|
178671-58-4 |
778 |
pentaerythritol tetrakis (2-cyano–3,3-diphenylacrylate) |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0686 |
|
182121-12-6 |
779 |
9,9-bis(methoxymethyl)fluorene |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0687 |
|
192268-64-7 |
780 |
poly-[[6-[N-(2,2,6,6-tetramethyl- 4-piperidinyl)-n-butylamino]-1,3,5-triazine-2,4-diyl][(2,2,6,6-tetramethyl-4-piperidinyl)imino]-1,6-hexanediyl[(2,2,6,6-tetramethyl-4-piperidinyl)imino]]-α-[N,N,N′,N′-tetrabutyl-N"-(2,2,6,6-tetramethyl-4-piperidinyl)-N"-[6-(2,2,6,6-tetramethyl-4-piperidinylamino)-hexyl]-[1,3,5-triazine-2,4,6-triamine]-ω-N,N,N′,N′-tetrabutyl-1,3,5-triazine-2,4-diamine] |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0688 |
|
227099-60-7 |
781 |
1,3,5-tris(4-benzoylphenyl) benzene |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0689 |
|
661476-41-1 |
782 |
polydimethylsiloxane, 3-aminopropyl terminated, polymer with 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane |
Additive or polymer production aid |
All |
|
|
|
The fraction with molecular weight below 1 000 Da shall not exceed 1 % (w/w). |
31 December 2034 |
||||||||||||||||||||
|
0690 |
|
736150-63-3 |
783 |
glycerides, castor-oil mono-, hydrogenated, acetates |
Additive or polymer production aid |
All |
|
|
(31) |
|
31 December 2034 |
||||||||||||||||||||
|
0691 |
|
745070-61-5 |
784 |
1,3,5-tris (2,2-di-methylpropanamido) benzene |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0692 |
|
100-21-0 |
785 |
terephthalic acid |
Monomer or other reactant |
All |
|
|
(27) |
|
31 December 2034 |
||||||||||||||||||||
|
0693 |
|
117-21-5 |
786 |
3-chlorophthalic anhydride |
Monomer or other reactant |
All |
2,5 - expressed as 3-chloro-phthalic acid |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0694 |
|
118-45-6 |
787 |
4-chlorophthalic anhydride |
Monomer or other reactant |
All |
2,5 - expressed as 4-chloro-phthalic acid |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0695 |
|
2530-85-0 |
788 |
[3-(methacryloxy)propyl]trimethoxysilane |
Additive Polymer production aid |
All |
2,5 |
|
|
Only to be used as a surface treatment agent of inorganic fillers. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. Only a method of analysis for the determination of the residual monomer in the treated filler is available. |
31 December 2034 |
||||||||||||||||||||
|
0696 |
|
106990-43-6 |
791 |
N,N′,N″,N″-tetrakis(4,6-bis(N-butyl-(N-methyl-2,2,6,6-tetramethylpiperidin-4-yl)amino)triazin-2-yl)-4,7-diazadecane-1,10-diamine |
Aid to polymerisation |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0697 |
|
203255-81-6 |
792 |
3,3′,5,5′-tetrakis(tert-butyl)-2,2′-dihydroxybiphenyl, cyclic ester with [3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propyl]oxyphosphonous acid |
Additive or polymer production aid |
All |
250 - expressed as the sum of phosphite and phosphate form of the substance and the hydrolysis products |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0698 |
|
102-71-6 |
793 |
triethanolamine |
Monomer or other reactant Aid to polymerisation Other (processing aid) |
All |
|
|
(36) |
|
31 December 2034 |
||||||||||||||||||||
|
0699 |
|
79-14-1 |
794 |
glycolic acid |
Monomer or other reactant |
All |
|
|
|
Only to be used for manufacture of polyglycolic acid (PGA) for (i) indirect water contact behind polyesters such as polyethylene terephthalate (PET) or polylactic acid (PLA); and (ii) direct water contact of a blend of PGA up to 3 % w/w in PET or PLA. |
31 December 2037 |
||||||||||||||||||||
|
0700 |
|
124172-53-8 |
795 |
N,N′-bis(2,2,6,6-tetramethyl-4-piperidyl)-N,N′-diformylhexamethylenediamine |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0701 |
|
18600-59-4 |
796 |
2,2′-(1,4-phenylene)bis[4H-3,1-benzoxazin-4-one] |
Additive or polymer production aid |
All |
2,5 - including the sum of its hydrolysis products |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0702 |
|
73018-26-5 |
797 |
polyester of adipic acid with 1,3-butanediol, 1,2-propanediol and 2-ethyl-1-hexanol |
Additive or polymer production aid |
All |
|
|
(30) (31) |
|
31 December 2037 |
||||||||||||||||||||
|
0703 |
|
6422-86-2 |
798 |
terephthalic acid, bis(2-ethylhexyl)ester |
Additive or polymer production aid |
All |
3000 |
|
(31) |
|
31 December 2034 |
||||||||||||||||||||
|
0704 |
|
867-13-0 |
800 |
triethyl phosphonoacetate |
Additive or polymer production aid |
Plastics |
|
|
|
Only for use in PET. |
31 December 2034 |
||||||||||||||||||||
|
0705 |
|
146340-15-0 |
802 |
alcohols, C12-C14 secondary, β-(2-hydroxyethoxy), ethoxylated |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0706 |
|
152261-33-1 |
803 |
α-alkenes(C20-C24) copolymer with maleic anhydride, reaction product with 4-amino-2,2,6,6-tetramethylpiperidine |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0707 |
|
1010121-89-7 |
804 |
poly(3-nonyl–1,1-dioxo-1-thiopropane–1,3-diyl)-block-poly(x-oleyl-7-hydroxy–1,5-diiminooctane–1,8-diyl), process mixture with x = 1 and/or 5, neutralised with dodecylbenzenesulfonic acid |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used as polymer production aid in polyethylene (PE), polypropylene (PP) and polystyrene (PS). |
31 December 2034 |
||||||||||||||||||||
|
0708 |
|
1076-97-7 |
806 |
1,4-cyclohexanedicarboxylic acid |
Monomer or other reactant |
Plastics |
250 |
|
|
Only to be used for manufacture of polyesters. |
31 December 2034 |
||||||||||||||||||||
|
0709 |
|
|
807 |
titanium nitride, nanoparticles |
Additive or polymer production aid |
Plastics |
|
|
|
No migration of titanium nitride nanoparticles. Only to be used in polyethylene terephthalate (PET) up to 20 mg/ kg. In the PET, the agglomerates have a diameter of 100-500 nm consisting of primary titanium nitride nanoparticles; primary particles have a diameter of approximately 20 nm. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2037 |
||||||||||||||||||||
|
0710 |
|
882073-43-0 |
808 |
bis(4-propylbenzylidene)propylsorbitol |
Additive or polymer production aid |
All |
250 - including the sum of its hydrolysis products |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0711 |
|
852282-89-4 |
809 |
N-(2,6-diisopropylphenyl)-6-[4-(1,1,3,3-tetramethylbutyl)phenoxy]-1H-benzo[de]isoquinolin-1,3(2H)-dione |
Additive or polymer production aid |
Plastics |
2,5 |
|
|
Only for use in PET. |
31 December 2028 |
||||||||||||||||||||
|
0712 |
|
68441-17-8 |
811 |
polyethylene waxes, oxidised |
Additive Polymer production aid |
All |
3000 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0713 |
|
124578-12-7 |
812 |
poly(12-hydroxystearic acid)-polyethyleneimine copolymer |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in plastics up to 0,1 % w/w. Prepared by the reaction of poly(12-hydroxystearic acid) with polyethyleneimine. |
31 December 2037 |
||||||||||||||||||||
|
0714 |
|
|
813 |
sulfosuccinic acid alkyl (C4-C20) or cyclohexyl diesters, salts |
Additive Polymer production aid |
All |
250 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0715 |
|
|
814 |
sulfosuccinic acid monoalkyl (C10-C16) polyethyleneglycol esters, salts |
Additive or polymer production aid |
All |
100 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0716 |
|
|
816 |
cis–1,2-cyclohexanedicarboxylic acid, salts |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0717 |
|
|
817 |
cis-endo-bicyclo[2.2.1]heptane- 2,3-dicarboxylic acid, salts |
Additive or polymer production aid |
All |
250 |
|
|
Purity ≥ 96 %. |
31 December 2031 |
||||||||||||||||||||
|
0718 |
|
|
818 |
methallylsulfonic acid, salts |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0719 |
|
|
819 |
neodecanoic acid, salts |
Additive or polymer production aid |
All |
2,5 - expressed as neodecanoic acid |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0720 |
|
|
820 |
pimelic acid, salts |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0721 |
|
|
821 |
stearoyl-2-lactylic acid, salts |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0722 |
|
|
822 |
perchloric acid, salts (perchlorate) |
Monomer or other reactant |
All |
|
|
(37) |
|
31 December 2031 |
||||||||||||||||||||
|
0723 |
|
|
823 |
5-sulfoisophthalic acid, salts |
Monomer or other reactant |
All |
250 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0724 |
|
329238-24-6 |
854 |
perfluoro acetic acid, α-substituted with the copolymer of perfluoro–1,2-propylene glycol and perfluoro–1,1-ethylene glycol, terminated with chlorohexafluoropropyloxy groups |
Additive or polymer production aid |
Plastics |
|
|
(38) |
Only to be used in concentrations up to 0,5 % w/w in the polymerisation of fluoropolymers that are processed at temperatures at or above 340 °C. |
31 December 2028 |
||||||||||||||||||||
|
0725 |
|
|
855 |
(butadiene, styrene, methyl methacrylate) copolymer cross-linked with 1,3-butanediol dimethacrylate |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 12 %. |
31 December 2037 |
||||||||||||||||||||
|
0726 |
|
25101-28-4 |
856 |
(butadiene, styrene, methyl methacrylate, butyl acrylate) copolymer cross-linked with divinylbenzene or 1,3-butanediol dimethacrylate |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 12 %. |
31 December 2037 |
||||||||||||||||||||
|
0727 |
|
37953-21-2 |
857 |
(methyl methacrylate, butyl acrylate, styrene, glycidylmethacrylate) copolymer |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 2 %. |
31 December 2037 |
||||||||||||||||||||
|
0728 |
|
90498-90-1 |
858 |
3,9-bis[2-(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]- 2,4,8,10-tetraoxaspiro[5,5]undecane |
Additive or polymer production aid |
All |
2,5 - expressed as the sum of the substance and its oxidation product 3-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)prop-2-enoyloxy)-1,1-dimethylethyl]-9-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]-2,4,8,10-tetraoxaspiro[5,5]-undecane in equilibrium with its para quinone methid tautomer |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0729 |
|
|
859 |
(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with divinylbenzene, in nanoform |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used as particles in non-plasticised PVC for cold water applications up to 10 % w/w in contact with water. When used together with the substance with EUPL Number 0761 and/ or the substance with EUPL Number 0767, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. |
31 December 2034 |
||||||||||||||||||||
|
0730 |
|
51798-33-5 |
860 |
perfluoro[2-(poly(n-propoxy))propanoic acid] |
Additive or polymer production aid |
Plastics |
|
|
(38) |
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C. |
31 December 2028 |
||||||||||||||||||||
|
0731 |
|
13252-13-6 |
861 |
perfluoro[2-(n-propoxy)propanoic acid] |
Additive or polymer production aid |
Plastics |
|
|
(38) |
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C. |
31 December 2028 |
||||||||||||||||||||
|
0732 |
|
18085-02-4 |
862 |
3,4-diacetoxy-1-butene |
Monomer or other reactant |
Plastics |
2,5 - including the hydrolysis product 3,4-dihydroxy-1-butene |
|
|
Only to be used as a co-monomer for ethylvinylalcohol (EVOH) and polyvinylalcohol (PVOH) copolymers. Only a method for determination of the residual content of the substance in the polymer is available. |
31 December 2037 |
||||||||||||||||||||
|
0733 |
|
646-25-3 |
863 |
1,10-decanediamine |
Monomer or other reactant |
Plastics |
2,5 |
|
|
Only to be used as a co-monomer for manufacturing polyamide articles for cold water applications. |
31 December 2037 |
||||||||||||||||||||
|
0734 |
|
56-06-4 |
864 |
2,4-diamino-6-hydroxypyrimidine |
Additive or polymer production aid |
Plastics |
250 |
|
|
Only to be used in rigid poly(vinyl chloride) (PVC). |
31 December 2034 |
||||||||||||||||||||
|
0735 |
|
25322-99-0 |
865 |
(butyl acrylate, methyl methacrylate, butyl methacrylate) copolymer |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in:
|
31 December 2037 |
||||||||||||||||||||
|
0736 |
|
|
866 |
(butyl acrylate, methyl methacrylate) copolymer, cross-linked with allyl methacrylate |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 7 %. |
31 December 2034 |
||||||||||||||||||||
|
0737 |
|
40471-03-2 |
867 |
(butyl methacrylate, ethyl acrylate, methyl methacrylate) copolymer |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 2 %. |
31 December 2037 |
||||||||||||||||||||
|
0738 |
|
9010-88-2 |
868 |
(ethyl acrylate, methyl methacrylate) copolymer |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in:
|
31 December 2037 |
||||||||||||||||||||
|
0739 |
|
27136-15-8 |
869 |
(butyl acrylate, methyl methacrylate, styrene) copolymer |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 3 %. |
31 December 2034 |
||||||||||||||||||||
|
0740 |
|
160535-46-6 |
870 |
N,N′,N″-tris(2-methylcyclohexyl)-1,2,3-propane-tricarboxamide |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0741 |
|
6607-41-6 |
872 |
2-phenyl–3,3-bis(4-hydroxyphe nyl)phthalimidine |
Monomer or other reactant |
Plastics |
2,5 |
|
|
To be used only as a co-monomer in polycarbonate copolymers. The substance contains aniline as an impurity; verification of compliance with the restriction set for primary aromatic amines in Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368 is necessary. |
31 December 2034 |
||||||||||||||||||||
|
0742 |
|
|
873 |
titanium dioxide reacted with octyltriethoxysilane |
Additive or polymer production aid |
All |
|
|
|
Reaction product of titanium dioxide with up to 2 % w/w surface treatment substance octyltriethoxysilane, processed at high temperatures. |
31 December 2037 |
||||||||||||||||||||
|
0743 |
|
156065-00-8 |
874 |
α-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyloxy, w-3-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyl polydimethylsiloxane |
Monomer or other reactant |
Plastics |
2,5 |
|
(32) |
Only to be used as comonomer in siloxane modified polycarbonate. The oligomeric mixture shall be characterised by the formula C24H38Si2O5(SiOC2H6)n (50 > n ≥ 26). |
31 December 2037 |
||||||||||||||||||||
|
0744 |
|
58128-22-6 |
875 |
poly(12-hydroxystearic acid) stearate |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0745 |
|
3010-96-6 |
881 |
2,2,4,4-tetramethylcyclobutane–1,3-diol |
Monomer or other reactant |
Plastics |
250 |
|
|
Only for use as co-monomer at a maximum use level of 35 mole % of the diol component of polyesters. |
31 December 2034 |
||||||||||||||||||||
|
0746 |
|
2416-94-6 |
882 |
2,3,6-trimethylphenol |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0747 |
|
4457-71-0 |
883 |
3-methyl–1,5-pentanediol |
Monomer or other reactant |
All |
2,5 |
|
|
Only to be used in materials in contact with water at a CF (S/V ratio) of ≤ 0,5 dm-1. |
31 December 2034 |
||||||||||||||||||||
|
0748 |
|
91082-17-6 |
884 |
alkyl(C10-C21)sulfonic acid, esters with phenol |
Additive Polymer production aid Other (processing aid) |
All |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0749 |
|
263244-54-8 |
885 |
cyclic oligomers of (butylene terephthalate) |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), polystyrene (PS) and rigid poly(vinyl chloride) (PVC) plastics in concentrations up to 1 % w/w for cold water applications. |
31 December 2034 |
||||||||||||||||||||
|
0750 |
|
16545-54-3 |
894 |
thiodipropionic acid, ditetradecyl ester |
Additive or polymer production aid |
All |
|
|
(14) |
|
31 December 2037 |
||||||||||||||||||||
|
0751 |
|
171090-93-0 |
895 |
3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoic acid, esters with C13-C15 branched and linear alcohols |
Additive Polymer production aid Other (processing aid) |
Plastics, rubber |
2,5 |
For the MTCtap values of degradation products, refer to Table 4. |
|
Only to be used in polyolefins. |
31 December 2037 |
||||||||||||||||||||
|
0752 |
|
958445-44-8 |
896 |
3H-perfluoro-3-[(3-methoxy-propoxy)propanoic acid], ammonium salt |
Additive or polymer production aid |
Plastics |
|
|
(38) For ammonium, refer to Annex V. |
Only to be used in the polymerisation of fluoropolymers when:
|
31 December 2028 |
||||||||||||||||||||
|
0753 |
|
37486-69-4 |
903 |
2H-perfluoro-[(5,8,11,14-tetra methyl)-tetraethyleneglycol ethyl propyl ether] |
Polymer production aid |
Plastics |
|
|
(38) |
Only to be used as a polymer production aid in the polymerisation of fluoropolymers that are
|
31 December 2028 |
||||||||||||||||||||
|
0754 |
|
120-40-1 |
923 |
N,N-bis(2-hydroxyethyl)dodecanamide |
Additive or polymer production aid |
All |
250 |
diethanolamine MTCtap = 15 μg/l. |
|
|
31 December 2037 |
||||||||||||||||||||
|
0755 |
|
908020-52-0 |
926 |
perfluoro[(2-ethyloxy-ethoxy)acetic acid], ammonium salt |
Additive or polymer production aid |
Plastics |
|
|
(38) For ammonium, refer to Annex V. |
Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes. |
31 December 2028 |
||||||||||||||||||||
|
0756 |
|
24937-78-8 |
969 |
ethylene-vinyl acetate copolymer wax |
Additive or polymer production aid |
Plastics |
|
The migration of low molecular weight oligomeric fraction below 1 000 Da shall not exceed 250 μg/l. |
|
Only to be used as a polymeric additive up to 2 % w/w in polyolefins. |
31 December 2034 |
||||||||||||||||||||
|
0757 |
|
2459-10-1 |
971 |
trimethyl trimellitate |
Monomer or other reactant |
Plastics |
|
|
|
Only to be used as a co-monomer up to 0,35 % w/w to produce modified polyesters. Only a method for determination of the residual content of the substance in the polymer is available. |
31 December 2037 |
||||||||||||||||||||
|
0758 |
|
19430-93-4 |
973 |
(perfluorobutyl)ethylene |
Monomer or other reactant |
Plastics |
|
|
(38) |
Only to be used as a co-monomer up to 0,1 % w/w in the polymerisation of fluoropolymers, sintered at high temperatures. |
31 December 2028 |
||||||||||||||||||||
|
0759 |
|
|
979 |
(polyethylene terephthalate, hydroxylated polybutadiene, pyromellitic anhydride) copolymer |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used in polyethylene terephthalate (PET) at a maximum level of 5 % w/w. |
31 December 2037 |
||||||||||||||||||||
|
0760 |
|
3634-83-1 |
988 |
1,3-bis(isocyanatomethyl)benzene |
Monomer or other reactant |
Plastics |
|
|
(33) |
To be used only as co-monomer in the manufacture of a middle layer coating on a poly(ethylene terephthalate) polymer film in a multilayer film. |
31 December 2034 |
||||||||||||||||||||
|
0761 |
|
|
998 |
(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer not cross-linked, in nanoform |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used as particles in non-plasticised PVC up to 10 % w/w for cold water applications. When used together with the substance with EUPL Number 0729 and/ or the substance with EUPL Number 0767, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. |
31 December 2037 |
||||||||||||||||||||
|
0762 |
|
976-56-7 |
1007 |
diethyl[[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]phosphonate |
Additive or polymer production aid |
Plastics |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
Only to be used up to 0,2 % (w/w) based on the final polymer weight in the polymerisation process to manufacture poly(ethylene terephthalate) (PET) and poly(ethylene 2,5-furandicarboxylate) (PEF). |
31 December 2034 |
||||||||||||||||||||
|
0763 |
|
|
1016 |
(methacrylic acid, ethyl acrylate, n-butyl acrylate, methyl methacrylate and butadiene) copolymer in nanoform |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used up to:
|
31 December 2037 |
||||||||||||||||||||
|
0764 |
|
25618-55-7 |
1017 |
polyglycerol |
Additive or polymer production aid |
All |
|
|
|
To be processed under conditions preventing the decomposition of the substance and up to a maximum temperature of 275 °C. |
31 December 2037 |
||||||||||||||||||||
|
0765 |
|
3238-40-2 |
1031 |
furan–2,5-dicarboxylic acid |
Monomer or other reactant |
Plastics |
250 |
The migration of the oligomeric fraction of less than 1 000 Da shall not exceed 2,5 μg/l (expressed as furan–2,5-dicarboxylic acid). |
|
Only to be used as a monomer in the production of polyethylene furanoate. A well described method suitable to determine the oligomer migration needs to be provided to the certifying body, as well as sufficient sample for calibration upon request. |
31 December 2037 |
||||||||||||||||||||
|
0766 |
|
3710-30-3 |
1034 |
1,7-octadiene |
Monomer or other reactant |
Plastics |
2,5 |
|
|
Only to be used as a crosslinking co-monomer in the manufacture of polyolefins for cold water applications. |
31 December 2037 |
||||||||||||||||||||
|
0767 |
|
|
1043 |
(butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with 1,3-butanediol dimethacrylate, in nanoform |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used as particles in non-plasticised PVC up to 10 % w/w for cold water applications. When used together with the substance with EUPL Number 0729 and/or the substance with EUPL Number 0761, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. |
31 December 2034 |
||||||||||||||||||||
|
0768 |
|
1190931-27-1 |
1045 |
perfluoro{acetic acid, 2-[(5- methoxy–1,3-dioxolan-4-yl)oxy]}, ammonium salt |
Additive or polymer production aid |
Plastics |
|
|
(38) For ammonium, refer to Annex V. |
Only to be used as a polymer production aid during the manufacture of fluoropolymers under high temperature conditions of at least 370 °C. |
31 December 2028 |
||||||||||||||||||||
|
0769 |
|
624-03-3 |
1048 |
ethylene glycol dipalmitate |
Additive or polymer production aid |
All |
|
|
(2) |
Only to be used when produced from a fatty acid precursor that is obtained from edible fats or oils. |
31 December 2034 |
||||||||||||||||||||
|
0770 |
|
|
1050 |
zinc oxide, nanoparticles, uncoated |
Additive or polymer production aid |
Plastics, silicones |
|
|
For zinc, refer to Annex V. |
When used in plastics, only to be used in unplasticised polymers. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2037 |
||||||||||||||||||||
|
0771 |
|
42774-15-2 |
1051 |
N,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl) isophthalamide |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0772 |
|
1455-42-1 |
1052 |
2,4,8,10-tetraoxaspiro[5,5]undecane–3,9-diethanol,β3,β3,β9,β9-tetramethyl- (‘SPG’) |
Monomer or other reactant |
Plastics |
250 |
The migration of oligomers of less than 1 000 Da shall not exceed 2,5 μg/l water (expressed as SPG). |
|
Only to be used as a monomer in the production of polyesters. A well described method to determine whether the oligomer migration complies with the restrictions specified shall be provided to the certifying body. This method shall be suitable for use by the certifying body for the purposes of certification. If the method requires a calibration sample, a sufficient sample shall be supplied to the certifying body on its request. |
31 December 2037 |
||||||||||||||||||||
|
0773 |
|
147398-31-0 |
1059 |
poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) ('PHBH') |
Additive or polymer production aid |
All |
|
The migration of all oligomers with a molecular weight below 1 000 Da shall not exceed 250 μg/l. |
(34) |
The substance is a macromolecule obtained from microbial fermentation. |
31 December 2037 |
||||||||||||||||||||
|
0774 |
|
|
1060 |
ground sunflower seed hulls |
Additive or polymer production aid |
All |
|
|
|
Only to be used for cold water applications. The seed hulls shall be obtained from sunflower seeds that are fit for human consumption. The processing temperature of the plastic containing the additive shall not exceed 240 °C. |
31 December 2037 |
||||||||||||||||||||
|
0775 |
|
80512-44-3 |
1061 |
2,4,4′-trifluorobenzophenone |
Monomer or other reactant |
Plastics |
|
|
|
Only to be used as a co-monomer in the manufacture of polyether ether ketone plastics up to 0,3 % w/w of the final material. |
31 December 2034 |
||||||||||||||||||||
|
0776 |
|
1547-26-8 |
1063 |
2,3,3,4,4,5,5-heptafluoro-1-pentene |
Other (starting substance for a polymeric additive) |
Plastics |
|
|
(38) |
Only to be used together with tetrafluoroethylene and/or ethylene co-monomers to manufacture fluorocopolymers for application as polymer processing aid at up to 0,2 % w/w of the drinking water contact material, and when the low-molecular mass fraction below 1 500 Da in the fluorocopolymer does not exceed 30 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
0777 |
|
39318-18-8 |
1064 |
tungsten oxide |
Additive or polymer production aid |
All |
|
|
For tungsten, refer to Annex V. |
Stoichiometry: WOn, n = 2,72-2,90. When used as reheat agent in polyethylene terephthalate (PET) verification of compliance with the specific migration limit is not required; in all other cases compliance with the specific migration limit shall be verified in accordance with Commission Implementing Decision (EU) 2024/365. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2037 |
||||||||||||||||||||
|
0778 |
|
85711-28-0 |
1065 |
mixture of methyl-branched and linear C14-C18 alkanamides, derived from fatty acids |
Additive or polymer production aid |
Plastics |
250 |
|
|
Only to be used in the manufacture of articles made of polyolefins. Migration of stearamide, under substance with EUPL Number 0248 to which no specific migration limit applies, shall be excluded from verification of the compliance of the migration of the mixture with the specific migration limit laid down for the mixture. |
31 December 2028 |
||||||||||||||||||||
|
0779 |
|
23985-75-3 |
1066 |
1,2,3,4-tetrahydronaphthalene–2,6-dicarboxylic acid, dimethyl ester |
Monomer or other reactant |
Plastics |
2,5 - expressed as the sum of the substance and of its dimers (cyclic and open chain) |
|
|
Only to be used in a plastic multilayer material, as a co-monomer in the manufacture of a polyester layer that is not in direct contact with water. |
31 December 2037 |
||||||||||||||||||||
|
0780 |
|
616-38-6 |
1067 |
dimethyl carbonate |
Monomer or other reactant |
All |
2,5 |
|
|
Migration of sum of all polycarbonate oligomers with a molecular weight below 1 000 Da must be < 2,5 μg/l. A well described method suitable to determine the oligomer migration needs to be provided to the certifying body, as well as a sufficient sample for calibration upon request. Not for use with 1,6-hexanediol in the manufacture of polycarbonate pre-polymers to manufacture thermoplastic polyurethanes with 4,4′-methylenediphenyldiisocyanate and diols. |
31 December 2037 |
||||||||||||||||||||
|
0781 |
|
2530-83-8 |
1068 |
[3-(2,3-epoxypropoxy)propyl]trimethoxy silane |
Monomer or other reactant |
Plastics |
|
|
|
Only to be used as a component of a sizing agent to treat glass fibres to be embedded in glass-fibre-reinforced low diffusivity plastics (polyethylene terephthalate (PET), polybutylene terephthalate (PBT) and thermoset polyesters and epoxy bisphenol vinylester) in contact with water. In treated glass fibres, residues of the substance must not be detectable at 0,01 mg/kg for the substance and 0,06 mg/kg for each of the reaction products (hydrolysed monomers and epoxy-containing cyclic dimer, trimer and tetramer). |
31 December 2037 |
||||||||||||||||||||
|
0782 |
|
75-28-5 |
1069 |
isobutane |
Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0783 |
|
1227937-46-3 |
1076 |
phosphorous acid, triphenyl ester, polymer with alpha-hydro-omega-hydroxypoly[oxy(methyl–1,2-ethanediyl)], C10-C16 alkyl esters |
Additive or polymer production aid |
Plastics |
2,5 |
|
|
To be used only:
|
31 December 2037 |
||||||||||||||||||||
|
0784 |
|
3319-31-1 |
1078 |
tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate |
Additive or polymer production aid |
Plastics |
|
|
(31) |
Only to be used as plasticiser to manufacture soft polyvinyl chloride. |
31 December 2034 |
||||||||||||||||||||
|
0785 |
|
156157-97-0 |
1080 |
(triethanolamine-perchlorate, sodium salt) dimer |
Additive or polymer production aid |
Plastics |
|
|
(36) (37) |
Only to be used in rigid polyvinyl chloride. |
31 December 2034 |
||||||||||||||||||||
|
0786 |
|
52628-03-2 |
1082 |
phosphoric acid, mixed esters with 2-hydroxyethyl methacrylate |
Monomer or other reactant |
Plastics |
2,5 - expressed as the sum of the mono-, di- and triesters of phosphoric acid and the mono-, di-, tri- and tetraesters of diphosphoric acid. |
|
|
Only to be used at up to 0,35 % (w/w) to manufacture polymethylmethacrylate. |
31 December 2037 |
||||||||||||||||||||
|
0787 |
|
2421-28-5 |
1083 |
benzophenone–3,3’,4,4’-tetracarboxylic dianhydride (‘BTDA’) |
Monomer or other reactant |
Plastics |
2,5 |
|
|
Only to be used at up to 43 % (w/w) as a co-monomer in the production of polyimides. |
31 December 2037 |
||||||||||||||||||||
|
0788 |
|
9005-82-7 |
|
amylose |
Aid to polymerisation |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0789 |
|
2634-33-5 |
|
1,2-benzisothiazol-3(2H)-one |
Additive Polymer production aid Other (in-can preservative) |
Rubber, silicone, coatings |
25 |
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0790 |
|
119-53-9 |
|
benzoin |
Polymer production aid |
Coatings |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0791 |
|
7637-07-2 |
|
boron trifluoride |
Aid to polymerisation |
Plastics, rubber |
|
|
For boron and fluoride, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0792 |
|
109-63-7 |
|
boron trifluoride etherate |
Aid to polymerisation |
Plastics |
|
|
For boron and fluoride, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0793 |
|
75-65-0 |
|
tert-butanol |
Polymer production aid |
Plastics, coatings |
500 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0794 |
|
25085-50-1 |
|
4-tert-butylphenol formaldehyde resin |
Aid to polymerisation |
Rubber |
|
4-tert butylphenol MTCtap = 2,5 μg/l formaldehyde MTCtap = 750 μg/l xylene MTCtap = 50,0 μg/l |
(15) |
Oligomers MW < 1 000 Da: max. 25 %; methylol groups: max. 16 %. |
31 December 2034 |
||||||||||||||||||||
|
0795 |
|
7789-75-5 |
|
calcium fluoride |
Additive |
Plastics |
|
|
For fluoride, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0796 |
|
8007-24-7 |
|
cashew nut shell liquid, distilled ( > 90 % cardanol) |
Monomer or other reactant |
Coatings |
2,5 |
|
|
Not for use as reactive diluent. |
31 December 2034 |
||||||||||||||||||||
|
0797 |
|
9004-35-7 |
|
cellulose acetate |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0798 |
|
9004-39-1 |
|
cellulose acetate propionate |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0799 |
|
26172-55-4 |
|
5-chloro-2-methyl-2H-isothiazol-3-one |
Other (in-can preservative) |
Coatings, silicone |
0,5 |
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0800 |
|
21679-31-2 |
|
chromium(III)acetylacetonate |
Polymer production aid |
Plastics |
|
|
For chromium, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0801 |
|
10025-73-7 |
|
chromium(III)chloride |
Aid to polymerisation |
Plastics |
|
|
For chromium, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0802 |
|
11118-57-3 |
|
chromium oxide |
Aid to polymerisation |
Plastics |
|
|
For chromium, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0803 |
|
7681-65-4 |
|
copper(I)iodide |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
(6) For copper, refer to Annex V. |
|
31 December 2034 |
||||||||||||||||||||
|
0804 |
|
110-05-4 |
|
di-tert-butyl peroxide |
Aid to polymerisation |
Plastics, rubber |
0,1 |
tert-butanol MTCtap = 500 μg/l methyl tert-butyl ether MTCtap = 15 μg/l |
|
|
31 December 2034 |
||||||||||||||||||||
|
0805 |
|
75-09-2 |
|
dichloromethane |
Polymer production aid |
Plastics, rubber, coatings |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0806 |
|
112-34-5 |
|
diethylene glycol monobutyl ether (DEGBE) |
Polymer production aid |
Coatings, silicone |
|
|
(40) |
|
31 December 2034 |
||||||||||||||||||||
|
0807 |
|
127-19-5 |
|
dimethylacetamide |
Polymer production aid |
Plastics |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0808 |
|
1323-83-7 |
|
distearic acid, diester with glycerol |
Additive Polymer production aid |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0809 |
|
100-41-4 |
|
ethylbenzene |
Polymer production aid |
Plastics, coatings, silicone |
30 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0810 |
|
111-76-2 |
|
ethyleneglycol monobutyl ether |
Polymer production aid |
Coatings, silicone |
|
|
(2) |
|
31 December 2034 |
||||||||||||||||||||
|
0811 |
|
112-25-4 |
|
ethyleneglycol monohexyl ether |
Polymer production aid |
Coatings |
|
|
(2) |
|
31 December 2034 |
||||||||||||||||||||
|
0812 |
|
31566-31-1 |
|
glycerol monostearate |
Additive Polymer production aid |
Rubber, coatings, silicone |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0813 |
|
1333-74-0 |
|
hydrogen |
Polymer production aid |
Rubber |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0814 |
|
8006-54-0 |
|
lanolin (pharmacopeia grade) |
Aid to polymerisation |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0815 |
|
25182-44-9 |
|
methacrylic acid, chromium (III) salt |
Polymer production aid Aid to polymerisation |
Plastics |
|
|
(22) For chromium, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
0816 |
|
78-93-3 |
|
methyl ethyl ketone (butan-2-one) |
Polymer production aid Additive |
Plastics, coatings, silicone, lubricants |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0817 |
|
108-10-1 |
|
methyl isobutyl ketone (4-methylpentan-2-one) |
Polymer production aid |
Plastics, coatings, silicone |
250 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0818 |
|
2163-42-0 |
|
2-methylpropane–1,3-diol |
Monomer or other reactant |
Coatings |
250 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0819 |
|
7782-44-7 |
|
oxygen |
Aid to polymerisation |
Plastics |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0820 |
|
27619-97-2 |
|
perfluorohexylethylsulfonic acid |
Additive Polymer production aid |
Plastics, coatings |
0,1 |
|
(38) (39) |
|
31 December 2028 |
||||||||||||||||||||
|
0821 |
|
103-71-9 |
|
phenyl isocyanate |
Monomer or other reactant |
Coatings |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2034 |
||||||||||||||||||||
|
0822 |
|
1314-56-3 |
|
phosphoric anhydride |
Monomer or other reactant Aid to polymerisation |
Coatings |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0823 |
|
9014-85-1 |
|
polyethyleneglycol-2,4,7,9-tetramethyl-5-decyn–4,7-diol ether |
Additive Polymer production aid |
Coatings |
|
|
|
Only to be used for sintered PTFE coatings. |
31 December 2034 |
||||||||||||||||||||
|
0824 |
|
37349-34-1 |
|
polyglyceryl-5 stearate |
Additive |
Coatings, silicone |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0825 |
|
9046-10-0 |
|
polyoxypropylene diamine (POPDA) |
Monomer or other reactant |
Coatings |
2,5 |
|
|
Average MW≥230 Da; purity: min. 80 % POPDA. |
31 December 2037 |
||||||||||||||||||||
|
0826 |
|
9002-89-5 |
|
polyvinyl alcohol |
Additive Polymer production aid |
Plastics, rubber |
|
|
|
Production by sintering. Maximum residual content in the final material (QM) = 20 000 mg/kg. |
31 December 2037 |
||||||||||||||||||||
|
0827 |
|
12136-45-7 |
|
potassium oxide |
Additive |
Plastics |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0828 |
|
9000-59-3 |
|
shellac |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0829 |
|
7681-49-4 |
|
sodium fluoride |
Additive |
Plastics |
|
|
For fluoride, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0830 |
|
1313-59-3 |
|
sodium oxide |
Additive Polymer production aid Other (processing aid) |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0831 |
|
7782-99-2 |
|
sulfurous acid |
Additive |
Plastics, rubber |
|
|
(18) |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0832 |
|
7646-78-8 |
|
tin(IV)chloride |
Aid to polymerisation |
Coatings |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0833 |
|
108-88-3 |
|
toluene |
Additive Polymer production aid |
Rubber, coatings, silicone |
60 |
|
|
Note: the MTCtap is higher than the odour threshold. |
31 December 2034 |
||||||||||||||||||||
|
0834 |
|
101-37-1 |
|
triallylcyanurate |
Aid to polymerisation |
Rubber |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0835 |
|
16938-22-0 |
|
2,2,4-trimethylhexane–1,6 diisocyanate |
Monomer or other reactant |
Coatings |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2028 |
||||||||||||||||||||
|
0836 |
|
15646-96-5 |
|
2,4,4-trimethylhexane–1,6-diisocyanate |
Monomer or other reactant |
Coatings |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2028 |
||||||||||||||||||||
|
0837 |
|
3048-64-4 |
|
5-vinyl-2-norbornene |
Monomer or other reactant (comonomer) |
Rubber |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0838 |
|
|
|
wheat protein |
Polymer production aid Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0839 |
|
1330-20-7 |
|
xylene |
Polymer production aid |
Plastics, coatings, silicone |
50 |
|
|
Note: the MTCtap is higher than the odour threshold. |
31 December 2034 |
||||||||||||||||||||
|
0840 |
|
|
|
zinc dust |
Additive |
Coatings |
|
|
For zinc, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||||||||||||
|
0841 |
|
55799-16-1 |
|
zinc hydroxyphosphite |
Additive |
Coatings |
|
|
For zinc, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0842 |
|
17501-44-9 |
|
acetyl acetonic acid, zirconium salt |
Monomer or other reactant Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0843 |
|
63449-41-2 |
|
alkyl(C8-C18)dimethylbenzylammonium chloride |
Additive Polymer production aid |
Lubricants |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0844 |
|
54326-11-3 |
|
aluminium hydroxide benzoate stearate |
Polymer production aid Additive |
Lubricants |
|
|
For aluminium, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
0845 |
|
1760-24-3 |
|
[3-(2-aminoethyl)aminopropyl]trimethoxysilane |
Polymer production aid |
Plastics, coatings |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0846 |
|
26125-61-1 |
|
aramid fibres |
Additive (polymeric) |
Rubber |
|
p-phenylendiamine MTCtap = 0,1 μg/l terephthalic acid MTCtap = 375 μg/l |
|
|
31 December 2034 |
||||||||||||||||||||
|
0847 |
|
95-33-0 |
|
benzothiazyl-2-cyclohexylsulfenamide |
Aid to polymerisation |
Rubber |
0,1 |
2-mercaptobenzothiazole (2-MBT) (CAS No. 149-30-4) MTCtap = 100 μg/l 2,2‘-Ddithio-bis-benzothiazole (Di(benzothiazole-2-yl)disulfide, MBTS) (CAS No. 120-78-5) MTCtap = 2.5 μg/l benzothiazole (BT) (CAS No. 95-16-9) MTCtap = 0.1 μg/l 2-benzothiazolone (BTon) (CAS No. 934-34-9) MTCtap = 0.1 μg/l cyclohexylamine (CAS No. 108-91-8) MTCtap = 2.5 μg/l |
(43) |
|
31 December 2031 |
||||||||||||||||||||
|
0848 |
|
78-63-7 |
|
2,5-bis(tert-butylperoxy)-2,5-dimethylhexane |
Aid to polymerisation |
Plastics, rubber, coatings |
0,1 |
When used for rubber, the following degradation products are relevant: tert-butanol MTCtap = 500 μg/l tert-amylalcohol MTCtap = 0,1 μg/l 2,5-dimethyl-hexanediol MTCtap = 0,1 μg/l 2,2,5,5-tetramethyltetrahydrofurane MTCtap = 0,1 μg/l (NB. it could not be analysed as no standard available) For DHBP application above 0.4%: 3,3,6,6-tetramethyl–1,2-dioxane MTCtap = 0,1 μg/l di-tert-butylperoxide MTCtap = 0,1 μg/l (both impurities of DHBP) |
|
|
31 December 2031 |
||||||||||||||||||||
|
0849 |
|
25155-25-3 {2212-81-9 & 2781-00-2} |
|
1,3-(and/or 1,4)-bis(tert-butylperoxyisopropyl)benzene |
Aid to polymerisation |
Plastics, rubber |
0,1 |
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0850 |
|
85-60-9 |
|
bis(2-methyl-4-hydroxy-5-tert-butylfenyl)butane |
Additive |
Rubber |
15 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0851 |
|
101-67-7 |
|
bis(4-octylphenyl)amine; (4,4'-dioctyldiphenylamine) |
Additive |
Rubber |
2,5 |
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0852 |
|
39817-09-9 |
|
bisphenol-F-diglycidylether (BFDGE; bis(hydroxyphenyl) methane bis(2,3-epoxypropyl) ethers) |
Monomer or other reactant (resin) |
Coatings |
2,5 - expressed as the sum of BFDGE and hydrolysis products |
bisphenol F MTCtap = 2,5 μg/l epichlorohydrin MTCtap = 0.1 μg/l |
(49) |
|
31 December 2028 |
||||||||||||||||||||
|
0853 |
|
7726-95-6 |
|
bromine |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0854 |
|
95-31-8 |
|
N-tert-butyl-2-benzothiazolesulfenamide |
Aid to polymerisation |
Rubber |
|
|
(43) |
|
31 December 2031 |
||||||||||||||||||||
|
0855 |
|
98-29-3 |
|
4-tert-butylcatechol |
Additive |
Coatings, silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0856 |
|
3457-61-2 |
|
tert-butylcumylperoxide |
Aid to polymerisation |
Coatings, silicone |
|
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0857 |
|
17540-75-9 |
|
4-sec-butyl-2,6-di-tert-butylphenol |
Additive |
Plastics, rubber |
2,5 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2031 |
||||||||||||||||||||
|
0858 |
|
88-18-6 |
|
2-tert-butylphenol |
Monomer of other reactant |
Plastics, coatings |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0859 |
|
2556-36-7 |
|
1,4-cyclohexanediisocyanate |
Monomer or other reactant |
Coatings |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2028 |
||||||||||||||||||||
|
0860 |
|
17796-82-6 |
|
N-(cyclohexylthio)phthalimide |
Aid to polymerisation |
Rubber |
150 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0861 |
|
101-77-9 |
|
4,4'-diaminodiphenylmethane |
Monomer or other reactant |
Coatings |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0862 |
|
68953-84-4 |
|
N,N'-diaryl-p-phenylenediamine |
Additive |
Rubber |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0863 |
|
94-36-0 |
|
dibenzoyl peroxide |
Aid to polymerisation |
Plastics, rubber, silicone |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0864 |
|
6731-36-8 |
|
1,1-di-tert-butylperoxy-3,3,5-trimethylcyclohexane |
Aid to polymerisation |
Plastics, rubber |
0,1 |
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0865 |
|
96-76-4 |
|
2,4-di-tert-butylphenol |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0866 |
|
77-58-7 |
|
dibutyltin dilaurate |
Aid to polymerisation |
Plastics, coatings, silicone |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0867 |
|
133-14-2 |
|
2,4-dichlorobenzoyl peroxide |
Aid to polymerisation |
Coatings, silicone |
0,1 |
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0868 |
|
80-43-3 |
|
dicumyl peroxide |
Aid to polymerisation |
Plastics, rubber, silicone |
0,1 |
When used for rubber or silicone, the following degradation products are relevant: cumylalcohol MTCtap = 2,5 μg/l methylcumylether MTCtap = 0,1 μg/l alpha-methylstyrene MTCtap = 0,7 μg/l acetophenone MTCtap = 2,5 μg/l |
|
|
31 December 2031 |
||||||||||||||||||||
|
0869 |
|
77-73-6 |
|
dicyclopentadiene |
Monomer or other reactant |
Rubber |
2,5 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0870 |
|
111-90-0 |
|
diethyleneglycol monoethyl ether |
Polymer production aid |
Coatings |
|
|
(40) |
|
31 December 2031 |
||||||||||||||||||||
|
0871 |
|
140-01-2 |
|
diethylenetriaminepentaacetic acid pentasodium salt |
Polymer production aid |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0872 |
|
3710-84-7 |
|
N,N-diethylhydroxylamine |
Aid to polymerisation |
Plastics |
|
|
|
Maximum dosage = 0,02 % (w/w). Maximum quantity of diethylamine impurity in the product 0,1 %. Maximum quantity of N-nitrosodiethylamine impurity in the product 0,5 mg/kg. |
31 December 2031 |
||||||||||||||||||||
|
0873 |
|
1047-16-1 |
|
5,12-dihydroquino[2,3-b]acridine–7,14-dione |
Additive |
Plastics, coatings |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
0874 |
|
3437-84-1 |
|
diisobutyryl peroxide |
Aid to polymerisation |
Plastics |
0,1 |
|
|
Maximum dosage = 0,02 % (w/w). No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0875 |
|
105-74-8 |
|
dilauroyl peroxide |
Aid to polymerisation |
Plastics |
|
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0876 |
|
109-87-5 |
|
dimethoxymethane |
Monomer or other reactant Aid to polymerisation |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0877 |
|
124-40-3 |
|
dimethylamine |
Monomer or other reactant |
Rubber, coatings |
3,0 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0878 |
|
7005-47-2 |
|
2-dimethylamino-2-methyl-1-propanol |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0879 |
|
895-85-2 |
|
di(4-methyl-benzoyl)peroxide |
Aid to polymerisation |
Silicone |
|
|
|
No peroxide on the product surface. Not for use in rubber. |
31 December 2031 |
||||||||||||||||||||
|
0880 |
|
53880-86-7 |
|
dimethyldiphenylthiuram disulfide |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2028 |
||||||||||||||||||||
|
0881 |
|
115-10-6 |
|
dimethyl ether |
Polymer production aid |
Coatings |
< 1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0882 |
|
68-12-2 |
|
N,N-dimethylformamide |
Polymer production aid |
Plastics, coatings |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0883 |
|
70131-67-8 |
|
dimethylsiloxane, hydroxy terminated |
Monomer or other reactant (base oil) |
Lubricants |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0884 |
|
3806-34-6 |
|
dioctadecyl pentaerythritol diphosphite |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0885 |
|
971-15-3 |
|
di-N-pentamethylenethiuram hexasulfide |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||||||||||||
|
0886 |
|
120-54-7 |
|
di-N-pentamethylenethiuram tetrasulfide |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2028 |
||||||||||||||||||||
|
0887 |
|
122-39-4 |
|
diphenylamine |
Aid to polymerisation |
Plastics, rubber |
|
|
|
Maximum dosage = 0,1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
0888 |
|
68411-46-1 |
|
diphenylamine, octylated |
Additive |
Rubber |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. Maximum residual content in the final material (QM) = 15 g/kg. |
31 December 2031 |
||||||||||||||||||||
|
0889 |
|
102-06-7 |
|
N,N-diphenylguanidine |
Aid to polymerisation |
Rubber |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0890 |
|
120-78-5 |
|
dithiobis(2-benzothiazole) |
Aid to polymerisation |
Rubber |
2,5 |
mercaptobenzothiazol MTCtap = 100 μg/l N-nitrosamines MTCtap = 0,3 μg/l |
(43) |
|
31 December 2031 |
||||||||||||||||||||
|
0891 |
|
87057-87-2 |
|
2-ethylbutane–1,4-diisocyanate |
Monomer or other reactant |
Coatings |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2028 |
||||||||||||||||||||
|
0892 |
|
110-80-5 |
|
ethyleneglycol monoethyl ether |
Monomer or other reactant Polymer production aid |
Coatings, silicone |
|
|
(2) |
|
31 December 2028 |
||||||||||||||||||||
|
0893 |
|
109-86-4 |
|
ethyleneglycol monomethyl ether |
Polymer production aid |
Coatings |
|
|
(2) |
|
31 December 2028 |
||||||||||||||||||||
|
0894 |
|
149-57-5 |
|
2-ethylhexanoic acid |
Additive Polymer production aid |
Plastics |
2,5 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0895 |
|
17689-77-9 |
|
ethyltrisacetoxysilane |
Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0896 |
|
28106-30-1 |
|
ethylvinylbenzene |
Monomer or other reactant |
Plastics |
|
|
(44) |
|
31 December 2028 |
||||||||||||||||||||
|
0897 |
|
78-27-3 |
|
ethynylcyclohexanol |
Polymer production aid |
Rubber, coatings, silicone |
900 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0898 |
|
9003-08-1 |
|
formaldehyde-2,4,6-triamino-1,3,5-triazine, copolymer |
Additive |
Coatings |
|
|
(15) |
Only for sintered PTFE. |
31 December 2037 |
||||||||||||||||||||
|
0899 |
|
9006-24-0 |
|
formaldehyde-xylene, copolymer |
Monomer or other reactant (resin) Other (processing aid) |
Rubber |
|
|
(15) |
|
31 December 2028 |
||||||||||||||||||||
|
0900 |
|
592-45-0 |
|
1,4-hexadiene |
Monomer or other reactant |
Rubber |
|
|
(45) |
|
31 December 2028 |
||||||||||||||||||||
|
0901 |
|
592-42-7 |
|
1,5-hexadiene |
Monomer or other reactant |
Rubber |
|
|
(45) |
|
31 December 2031 |
||||||||||||||||||||
|
0902 |
|
16096-31-4 |
|
1,6 hexanediol diglycidyl ether |
Additive |
Coatings |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0903 |
|
|
|
2-hydroxy-2-sulfinato acetic acid, disodium salt |
Aid to polymerisation |
Plastics |
|
|
(18) |
When used in a mixture of 2-hydroxy-2-sulfinato acetic acid, disodium salt (35-60 %), 2-hydroxy-2-sulfonato acetic acid, disodium salt (10-60 %) and sodium sulfite (0-40 %) (mixture), the maximum dosage shall be 0,5 %. |
31 December 2028 |
||||||||||||||||||||
|
0904 |
|
|
|
2-hydroxy-2-sulfonato acetic acid, disodium salt |
Aid to polymerisation |
Plastics |
|
|
(18) |
When used in a mixture of 2-hydroxy-2-sulfinato acetic acid, disodium salt (35-60 %), 2-hydroxy-2-sulfonato acetic acid, disodium salt (10-60 %) and sodium sulfite (0-40 %) (mixture), the maximum dosage shall be 0,5 %. |
31 December 2028 |
||||||||||||||||||||
|
0905 |
|
2226-96-2 |
|
4-hydroxy-2,2,6,6-tetramethylpiperidinoxyl |
Aid to polymerisation |
Plastics |
2,5 |
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0906 |
|
55406-53-6 |
|
3-iodo-2-propynylbutylcarbamate |
Aid to polymerisation |
Rubber, coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0907 |
|
78-83-1 |
|
isobutanol |
Polymer production aid |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0908 |
|
7425-80-1 |
|
isobutyl titanate |
Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0909 |
|
3999-01-7 |
|
linoleamide |
Aid to polymerisation |
Coatings, silicone |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0910 |
|
149-30-4 |
|
2-mercaptobenzothiazole |
Aid to polymerisation |
Rubber |
100 |
|
(43) |
|
31 December 2031 |
||||||||||||||||||||
|
0911 |
|
60-24-2 |
|
2-mercaptoethanol |
Additive |
Plastics, rubber |
2,5 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0912 |
|
68440-24-4 |
|
mercaptoethyl tallate |
Additive or polymer production aid |
Plastics |
1500 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0913 |
|
115-19-5 |
|
methyl-2-butyn-3-ol-2 |
Aid to polymerisation |
Coatings, silicones |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0914 |
|
15520-10-2 |
|
2-methyl–1,5-diaminopentane |
Monomer or other reactant |
Coatings |
5,0 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0915 |
|
7786-17-6 |
|
2,2-methylenebis(4-methyl-6-nonylphenol) |
Additive |
Plastics, rubber |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0916 |
|
598-09-4 |
|
methylepichlorhydrin |
Monomer or other reactant |
Coatings |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0917 |
|
96-29-7 |
|
methyl ethyl ketone oxime |
Aid to polymerisation |
Coatings |
120 |
|
|
Only for hot curing coatings. |
31 December 2028 |
||||||||||||||||||||
|
0918 |
|
693-98-1 |
|
2-methylimidazole |
Additive |
Coatings |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0919 |
|
534-26-9 |
|
2-methylimidazoline |
Additive or polymer production aid |
Coatings |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0920 |
|
34813-62-2 |
|
2-methylpentane–1,5-diisocyanate |
Monomer or other reactant |
Coatings |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2028 |
||||||||||||||||||||
|
0921 |
|
201687-58-3 |
|
methyltin-2-mercaptoethyl tallate |
Aid to polymerisation |
Plastics |
9,0 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0922 |
|
4253-34-3 |
|
methyltrisacetoxysilane |
Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0923 |
|
22984-54-9 |
|
methyltrisbutanoximosilane |
Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0924 |
240-040-8 |
15901-40-3 |
|
methyltriscyclohexylaminosilane |
Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0925 |
253-634-7 |
37697-65-7 |
|
methyltris-sec.-butylaminosilane |
Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0926 |
|
|
|
polytitanic acid, butyl ester (butylpolytitanate) |
Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0927 |
|
108-90-7 |
|
monochlorobenzene |
Additive |
Plastics, coatings |
1,0 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0928 |
|
51240-95-0 |
|
neodecaneperoxoic acid, 1,1,3,3-tetramethylbutyl ester |
Aid to polymerisation |
Plastics |
0,1 |
|
|
Maximum dosage = 0,06 % (w/w). No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0929 |
|
9084-06-4 |
|
naphthalene sulfonic acid-formaldehyde condensation product, sodium salt |
Polymer production aid |
Plastics, rubber |
|
|
(15) |
Only for sintered products. |
31 December 2037 |
||||||||||||||||||||
|
0930 |
|
7697-37-2 |
|
nitric acid |
Polymer production aid |
Plastics, coatings |
5,0 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0931 |
|
26530-20-1 |
|
2-octyl-2H-isothiazole-3-one |
Other (in-can preservative) |
Rubber |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
0932 |
|
8012-95-1 8042-47-5 |
|
paraffin oil |
Additive |
Plastics, rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0933 |
|
614-45-9 |
|
peroxybenzoic acid, tert-butyl ester |
Aid to polymerisation |
Plastics, coatings |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0934 |
|
15520-11-3 |
|
peroxydicarbonic acid, bis(4-tert-butylcyclohexyl) ester |
Aid to polymerisation |
Plastics, coatings |
0,1 |
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0935 |
|
16111-62-9 |
|
peroxydicarbonic acid, bis(2-ethylhexyl) ester |
Aid to polymerisation |
Plastics |
0,1 |
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0936 |
|
26322-14-5 |
|
peroxydicarbonic acid, dicetyl ester |
Aid to polymerisation |
Plastics |
0,1 |
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0937 |
|
53220-22-7 |
|
peroxydicarbonic acid, dimyristyl ester |
Aid to polymerisation |
Plastics |
0,1 |
|
|
No peroxide on the product surface. |
31 December 2031 |
||||||||||||||||||||
|
0938 |
|
927-07-1 |
|
peroxypivalic acid, tert-butyl ester |
Aid to polymerisation |
Plastics |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0939 |
|
3006-82-4 |
|
peroxy-2-ethylhexanoic acid, tert-butyl ester |
Aid to polymerisation |
Plastics, rubber |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0940 |
|
7775-27-1 |
|
peroxydisulfuric acid, disodium salt |
Aid to polymerisation |
Plastics, coatings |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0941 |
|
26748-41-4 |
|
peroxyneodecanoic acid, tert-butyl ester |
Aid to polymerisation |
Plastics |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0942 |
|
7727-21-1 |
|
peroxydisulfuric acid, dipotassium salt |
Aid to polymerisation |
Plastics, coatings |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0943 |
|
68610-06-0 |
|
phenols, butylated, isobutylated or octylated |
Additive |
Rubber |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2028 |
||||||||||||||||||||
|
0944 |
|
61788-44-1 |
|
phenols, styrenated |
Additive |
Rubber, coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0945 |
|
936-49-2 |
|
2-phenylimidazol |
Monomer or other reactant |
Coatings |
2,5 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0946 |
|
104-49-4 |
|
1,4-phenylene diisocyanate |
Monomer or other reactant |
Coatings |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2031 |
||||||||||||||||||||
|
0947 |
|
7774-80-3 |
|
phenyl-o-tolyl-phenylenediamine |
Additive |
Rubber |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0948 |
|
126-73-8 |
|
phosphoric acid, tributyl ester |
Additive Polymer production aid |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0949 |
|
10294-56-1 |
|
phosphorous acid |
Additive |
Rubber |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
0950 |
|
54771-30-1 |
|
phosphorous acid, dinonylphenyl bis(nonylphenyl) ester |
Additive |
Plastics |
300 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0951 |
|
84-61-7 |
|
phthalic acid, dicyclohexyl ester |
Additive |
Plastics |
300 |
|
|
Maximum dosage = 5 % (w/w) as sum of all phthalates. |
31 December 2028 |
||||||||||||||||||||
|
0952 |
|
110-85-0 |
|
piperazine |
Monomer or other reactant |
Plastics, rubber |
75 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0953 |
|
9003-01-4 |
|
polyacrylic acid |
Additive |
Rubber |
|
|
(21) |
|
31 December 2031 |
||||||||||||||||||||
|
0954 |
|
9003-29-6 |
|
polybutene |
Monomer or other reactant (base oil) Additive Polymer production aid |
Rubber, lubricants |
|
|
|
Molecular weight > 1 000 Da. |
31 December 2034 |
||||||||||||||||||||
|
0955 |
|
68937-10-0 |
|
polybutene, hydrogenated |
Monomer or other reactant (base oil) |
Lubricants |
|
|
|
Molecular weight > 1 000 Da. |
31 December 2037 |
||||||||||||||||||||
|
0956 |
|
68132-00-3 |
|
polycyclopentadiene |
Monomer or other reactant (resin) |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0957 |
|
|
|
polyethyleneamine |
Additive |
Plastics, coatings |
|
|
|
For polypropylene as an anchoring agent: ≤ 0,05 μg/dm2 provided that the product does not release ethyleneimine. |
31 December 2031 |
||||||||||||||||||||
|
0958 |
|
|
|
polyethylene aminostearamide ethylsulfate |
Additive |
Coatings |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0959 |
|
28208-80-2 |
|
poly(ethylene-co-acrylic acid), zinc salt |
Monomer or other reactant |
Plastics |
|
|
(21) For zinc, refer to Annex V. |
|
31 December 2037 |
||||||||||||||||||||
|
0960 |
|
9005-07-6 |
|
polyethyleneglycol dioleate |
Additive |
Coatings |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
0961 |
|
9003-27-4 |
|
polyisobutene |
Monomer or other reactant (base oil) Additive (polymeric) for rubber |
Plastics, rubber, lubricants |
|
|
|
Molecular weight > 1 000 Da. |
31 December 2037 |
||||||||||||||||||||
|
0962 |
|
|
|
poly(styrene-co-maleic anhydride) |
Additive |
Plastics |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0963 |
|
9002-84-0 |
|
polytetrafluoroethylene |
Additive (polymeric) |
Coatings, lubricants, silicone |
2,5 - for the residual tetrafluoroethylene |
|
(38) |
|
31 December 2028 |
||||||||||||||||||||
|
0964 |
|
25498-06-0 |
|
polyvinyl cyclohexane |
Polymer production aid |
Rubber |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0965 |
|
|
|
poly(vinyl methyl ether) |
Additive |
Plastics |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
0966 |
|
35674-65-8 |
|
N,N''-1,3-propanediyl bis-(N'-octadecylurea) |
Additive Polymer production aid |
Coatings |
2,5 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0967 |
|
108-32-7 |
|
propylene carbonate |
Polymer production aid |
Lubricants |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0968 |
|
122-62-3 |
|
sebacic acid, bis(2-ethylhexyl) ester |
Additive (polymeric) |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0969 |
|
52829-07-9 |
|
sebacic acid, bis(2,2,6,6-tetramethyl-4-piperidyl) ester |
Additive Polymer production aid |
Plastics, lubricants |
300 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0970 |
|
|
|
sodium aluminate |
Additive |
Coatings |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
0971 |
|
149-44-0 |
|
sodium hydroxymethanesulfinate |
Aid to polymerisation |
Plastics |
|
|
|
Maximum dosage = 0,07 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
0972 |
|
|
|
stearoyl-palmitoyl-benzoyl-methane |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0973 |
|
68442-68-2 |
|
styrene, reaction product with diphenylamine |
Additive |
Rubber |
2,5 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0974 |
|
126-33-0 |
|
sulfolane |
Polymer production aid |
Plastics |
2,5 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0975 |
|
7446-09-5 |
|
sulfur dioxide |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0976 |
|
10591-85-2 |
|
tetrabenzylthiuram disulfide |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||||||||||||
|
0977 |
|
5593-70-4 |
|
tetra-n-butyl titanate |
Aid to polymerisation |
Plastics, rubber, silicone |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0978 |
|
97-77-8 |
|
tetraethylthiuram disulfide |
Aid to polymerisation |
Plastics, rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||||||||||||
|
0979 |
|
811-97-2 |
|
1,1,1,2-tetrafluoroethane |
Additive |
Plastics |
|
|
(38) |
Maximum dosage = 2,2 % (w/w). |
31 December 2028 |
||||||||||||||||||||
|
0980 |
|
3064-73-1 |
|
tetraisobutylthiuramdisulfide |
Additive or polymer production aid |
Rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||||||||||||
|
0981 |
|
126-86-3 |
|
2,4,7,9-tetramethyl-5-decyne–4,7-diol |
Aid to polymerisation |
Rubber |
|
|
|
Maximum dosage = 0,1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
0982 |
|
137-26-8 |
|
tetramethylthiuram disulfide |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||||||||||||
|
0983 |
|
97-74-5 |
|
tetramethylthiuram monosulfide |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||||||||||||
|
0984 |
|
26471-62-5 |
|
toluene diisocyanate |
Monomer or other reactant |
Coatings |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2031 |
||||||||||||||||||||
|
0985 |
|
104-15-4 |
|
p-toluenesulfonic acid |
Aid to polymerisation |
Plastics, rubber |
0,5 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0986 |
|
93-69-6 |
|
o-tolylbiguanidine |
Aid to polymerisation |
Rubber |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0987 |
|
1025-15-6 |
|
triallyl isocyanurate |
Aid to polymerisation |
Rubber |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0988 |
|
28807-72-9 |
|
tricyclododecane diisocyanate |
Monomer or other reactant |
Coatings |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2028 |
||||||||||||||||||||
|
0989 |
|
90-72-2 |
|
2,4,6-tri(dimethylaminomethyl)phenol |
Aid to polymerisation |
Rubber, coatings |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0990 |
|
78-40-0 |
|
triethyl phosphate |
Additive Polymer production aid |
Plastics, coatings |
375 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
0991 |
|
7718-98-1 |
|
vanadium chloride |
Aid to polymerisation |
Plastics, rubber |
|
|
For vanadium, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
0992 |
|
11099-11-9 |
|
vanadium oxide |
Aid to polymerisation |
Plastics, rubber |
|
|
For vanadium, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
0993 |
|
88-12-0 |
|
vinylpyrrolidone |
Monomer Additive Polymer production aid |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
0994 |
|
14726-36-4 |
|
zinc dibenzyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For zinc, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
0995 |
|
136-23-2 |
|
zinc dibutyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For zinc, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
0996 |
|
14324-55-1 |
|
zinc diethyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For zinc, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
0997 |
|
137-30-4 |
|
zinc dimethyldithiocarbamate |
Aid to polymerisation Other (in-can preservative) |
Rubber, coatings |
|
|
(42) For zinc, refer to Annex V. |
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
0998 |
|
136-53-8 |
|
zinc-di-2-ethylhexanoate |
Monomer or other reactant |
Silicone |
|
|
|
Maximum residual content in the final material (QM) = 15 g/kg. |
31 December 2031 |
||||||||||||||||||||
|
0999 |
|
53801-45-9 |
|
zirconium oxide |
Additive |
Plastics, rubber |
|
|
For zirconium, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1000 |
|
1068-27-5 |
|
2,5-bis(tert-butylperoxy)-2,5-dimethyl-3-hexyne |
Aid to polymerisation |
Plastics |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1001 |
|
1071-93-8 |
|
adipic acid dihydrazide |
Monomer or other reactant |
Coatings |
2,5 |
hydrazine MTCtap = 0,1 μg/l – to be checked by analysis. |
|
Only for powder coatings. |
31 December 2034 |
||||||||||||||||||||
|
1002 |
|
1338-23-4 |
|
2-butanone peroxide |
Polymer production aid Aid to polymerisation |
Plastics |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1003 |
|
13822-56-5 |
|
3-(trimethoxysilyl)propylamine |
Monomer or other reactant |
Coatings |
85 - expressed as silicon |
|
|
Only for use in gas phase coatings on silicones, at max 400 °C; Si/N ratio in the layer should be at least 11. |
31 December 2031 |
||||||||||||||||||||
|
1004 |
|
14024-18-1 |
|
acetylacetonate, iron salt |
Polymer production aid Aid to polymerisation |
Plastics, coatings |
2,5 |
|
|
Maximum dosage = 0,01 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1005 |
|
1503-48-6 |
|
quino [2, 3-b]acridine-6,7,13,14(5H,12H)-tetrone (quinacridinone quinone, QAQ) |
Additive |
Plastics |
2,0 |
|
|
Purity > 90% QAQ. Specific nanomaterial (> 50% 1-100 nm) in maximum one particle dimension (platelets). |
31 December 2031 |
||||||||||||||||||||
|
1006 |
|
22288-41-1 |
|
1,1,3,3-tetramethylbutyl peroxypivalate |
Polymer production aid Aid to polymerisation |
Plastics |
1,0 |
|
|
Maximum dosage = 0,007 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1007 |
|
24748-23-0 |
|
3,6,9-triethyl-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonane |
Polymer production aid Aid to polymerisation |
Plastics |
0,1 |
|
|
Maximum dosage = 0,05 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1008 |
|
29240-17-3 |
|
(1,1-dimethylpropyl) 2,2-dimethyl-propaneperoxoate |
Polymer production aid Aid to polymerisation |
Plastics |
0,1 |
|
|
Maximum dosage = 0,2 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1009 |
|
37187-22-7 |
|
acetylacetone peroxide |
Aid to polymerisation |
Plastics |
0,1 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1010 |
|
681-84-5 |
|
tetramethylorthosilicate |
Monomer or other reactant |
Coatings |
|
|
|
Only for use in gas phase coatings on silicones. |
31 December 2031 |
||||||||||||||||||||
|
1011 |
|
94-96-2 |
|
2-ethyl–1,3-hexanediol |
Monomer or other reactant |
Plastics, coatings |
2,5 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1012 |
|
3851-87-4 |
|
di-(3,5,5-trimethyl)-hexanoyl)peroxide |
Aid to polymerisation |
Plastics, rubber, coatings, silicone |
0,1 |
|
|
Maximum dosage = 0,2 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1013 |
|
68928-76-7 |
|
dimethyltin dineodecanoate |
Polymer production aid Aid to polymerisation |
Plastics, rubber, coatings |
|
|
(9) |
Plastics: maximum dosage = 0,12 % (w/w). Rubber, coatings: maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1014 |
231-765-0 |
7722-84-1 |
|
hydrogen peroxide |
Aid to polymerisation |
Plastics, rubber, coatings |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1015 |
|
80-15-9 |
|
cumene hydroperoxide |
Monomer or other reactant (crosslinker incorporated into polymer) Aid to polymerisation |
Plastics, rubber, coatings |
0,1 |
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1016 |
236-050-7 |
13122-18-4 |
|
peroxy(3,5,5-trimethylhexanoic acid), tert-butyl ester |
Aid to polymerisation |
Plastics, rubber, coatings |
0,1 |
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1017 |
246-619-1 |
25103-58-6 |
|
Polymer production aid Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Plastics: maximum dosage = 0,7 % (w/w). Rubber: maximum dosage = 1 % (w/w). |
31 December 2031 |
|||||||||||||||||||||
|
1018 |
231-786-5 |
7727-54-0 |
|
ammonium persulfate |
Aid to polymerisation |
Plastics, rubber, coatings |
0,1 |
|
For ammonium, refer to Annex V. |
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1019 |
|
7705-07-9 |
|
titanium trichloride |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1020 |
203-650-5 |
109-13-7 |
|
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
|||||||||||||||||||||
|
1021 |
203-710-0 |
109-83-1 |
|
2-methylaminoethanol |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1022 |
203-874-3 |
111-48-8 |
|
thiodiglycol |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1023 |
|
112-55-0 |
|
1-dodecanethiol |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1024 |
|
114-83-0 |
|
acetophenylhydrazine |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2028 |
||||||||||||||||||||
|
1025 |
204-469-4 |
121-44-8 |
|
triethylamine |
Aid to polymerisation |
Plastics, rubber, coatings |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1026 |
204-709-8 |
124-68-5 |
|
Polymer production aid |
Plastics, rubber, coatings |
|
|
|
|
31 December 2031 |
|||||||||||||||||||||
|
1027 |
236-740-8 |
13472-08-7 |
|
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
|||||||||||||||||||||
|
1028 |
|
13476-99-8 |
|
vanadium tris acetyl acetonate |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1029 |
|
14666-78-5 |
|
diethylperoxydicarbonate |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1030 |
205-769-8 |
150-76-5 |
|
4-methoxyphenol |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1031 |
|
16066-38-9 |
|
di-n-propyl peroxydicarbonate |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1032 |
240-344-0 |
16215-49-9 |
|
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
|||||||||||||||||||||
|
1033 |
218-880-1 |
2273-43-0 |
|
butylhydroxyoxostannane |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1034 |
|
22743-71-1 |
|
1,1-bis(t-hexyperoxy)cyclohexane |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2028 |
||||||||||||||||||||
|
1035 |
252-091-3 |
34562-31-7 |
|
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
|||||||||||||||||||||
|
1036 |
224-305-5 |
4297-95-4 |
|
sodium phenylphosphinate |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1037 |
226-218-8 |
5329-14-6 |
|
sulfamidic acid |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1038 |
208-778-5 |
541-41-3 |
|
ethyl chloroformate |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1039 |
210-036-0 |
603-35-0 |
|
triphenylphosphine |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1040 |
270-877-4 |
68479-98-1 |
|
diethylmethylbenzenediamine |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1041 |
200-915-7 |
75-91-2 |
|
tert-butyl hydroperoxide |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2028 |
||||||||||||||||||||
|
1042 |
231-780-2 |
7727-18-6 |
|
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
|||||||||||||||||||||
|
1043 |
201-321-0 |
81-07-2 |
|
1,2-benzisothiazol-3(2H)-one 1,1-dioxide |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1044 |
212-791-1 |
870-08-6 |
|
dioctyltin oxide |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1045 |
|
92-84-2 |
|
phenothiazine |
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1046 |
202-443-7 |
95-71-6 |
|
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
|||||||||||||||||||||
|
1047 |
202-805-4 |
99-97-8 |
|
Aid to polymerisation |
Plastics, rubber, coatings |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2031 |
|||||||||||||||||||||
|
1048 |
|
111-70-6 |
|
1-heptanol |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1049 |
|
112-53-8 |
|
1-dodecanol |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1050 |
|
8002-11-7 |
|
poppy-seed oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1051 |
|
8024-09-7 |
|
walnut oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1052 |
|
109-52-4 |
|
valeric acid |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1053 |
|
111-27-3 |
|
1-hexanol |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1054 |
|
112-72-1 |
|
1-tetradecanol |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1055 |
|
112-92-5 |
|
1-octadecanol |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1056 |
|
163149-29-9 |
|
poly-alpha-olefin from 1-dodecene and 1-octene |
Monomer or other reactant (base oil) |
Lubricants |
|
|
|
Average molecular weight not less than 440 Da. Viscosity at 100 °C not less than 3.8 cSt (3.8 × 10-6 m2/s). Polymerisation production aids and additives less than 0,02 % (w/w) in polymer. |
31 December 2037 |
||||||||||||||||||||
|
1057 |
|
219756-63-5 |
|
sodium-alpha-C11-alcohol-heptaglycol ether-omega-sulfate |
Aid to polymerisation |
Coatings |
250 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1058 |
|
25038-74-8 |
|
polylaurolactam |
Polymer production aid Additive |
Lubricants |
250 - for laurolactam |
|
|
Oligomers with MW < 1 000 Da maximum 2 %. |
31 December 2037 |
||||||||||||||||||||
|
1059 |
|
68071-15-8 |
|
butandiololeate, ethoxylated |
Other (processing aid) |
Rubbers |
2,5 |
|
|
|
31 December 2034 |
||||||||||||||||||||
|
1060 |
|
68132-21-8 |
|
perilla oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1061 |
|
68439-49-6 |
|
polyethylene glycol (EO=2-6) monoalkyl(C16-C18)ether |
Additive Aid to polymerisation |
Plastics, rubber, coatings |
2,5 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1062 |
|
69011-36-5 |
|
isotridecanol, ethoxylated |
Additive Polymer production aid |
Coatings |
90 |
|
|
Maximum residue of 0,2 mg ethylene oxide per kg polymer. |
31 December 2031 |
||||||||||||||||||||
|
1063 |
|
8001-21-6 |
|
sunflower oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1064 |
|
8001-23-8 |
|
safflower oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1065 |
|
8001-26-1 |
|
linseed oil |
Monomer or other reactant Additive |
Rubber, coatings |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1066 |
|
8001-29-4 |
|
cotton seed oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1067 |
|
8001-30-7 |
|
corn oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1068 |
|
8001-31-8 |
|
coconut oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1069 |
|
8001-78-3 |
|
castor oil, hydrogenated |
Monomer or other reactant Additive Polymer production aid |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1070 |
|
8002-26-4 |
|
tall oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1071 |
|
8008-74-0 |
|
sesame oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1072 |
|
8015-74-5 |
|
beechnut oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1073 |
|
8016-13-5 |
|
fish oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1074 |
|
8016-24-8 |
|
hempseed oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1075 |
|
8016-49-7 |
|
pumpkin seed oil |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1076 |
|
89-05-4 |
|
pyromellitic acid |
Monomer or other reactant |
Coatings |
2,5 – expressed as the sum of pyromellitic acid and pyromellitc anhydride |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1077 |
|
9003-17-2 |
|
polybutadiene |
Additive |
Plastics, rubber |
|
|
|
MW > 1 000 Da. |
31 December 2037 |
||||||||||||||||||||
|
1078 |
|
9003-31-0 |
|
polyisoprene |
Additive |
Rubber |
|
|
|
MW > 1 000 Da. |
31 December 2037 |
||||||||||||||||||||
|
1079 |
|
9004-96-0 |
|
poly (ethylene glycol) monooleate |
Additive |
Coatings |
|
|
|
Restriction is covered via the parameter TOC < 0,5 mg/l. |
31 December 2028 |
||||||||||||||||||||
|
1080 |
|
|
|
1,1,3-tris-(2-methyl-4-di-tridecylphosphite-5-tert-butyl-phenyl)-butane with added diphenylphosphite |
Additive |
Plastics |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
For polyethylene and polypropylene, maximum residual content in the final material (QM) = 5 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1081 |
|
504-60-9 |
|
1,3-pentadiene |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1082 |
|
513-85-9 |
|
2,3-butanediol |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1083 |
|
|
|
1,4-dihydro–2,6-dimethyl–3,5-dicarbododecyloxy-pyridine |
Additive |
Plastics |
|
|
|
For PVC and its copolymers, maximum residual content in the final material (QM) = 3 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1084 |
|
|
|
1-hydropentafluoro propene |
Monomer or other reactant |
Rubber |
|
|
(38) |
|
31 December 2028 |
||||||||||||||||||||
|
1085 |
|
|
|
2-tert-butyl-4-hydroxyanisole |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1086 |
|
|
|
3-tert-butyl-4-hydroxyanisole |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1087 |
|
|
|
2,4-diphenylmethane-diisocyanate |
Monomer or other reactant |
Rubber |
5,0 - expressed as primary aromatic amines |
|
(16) |
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
1088 |
|
|
|
2,6-diphenylmethane-diisocyanate |
Monomer or other reactant |
Rubber |
5,0 - expressed as primary aromatic amines |
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2028 |
||||||||||||||||||||
|
1089 |
213-593-8 |
992-55-2 |
|
4,4'-[[6-(octylthio)-1,3,5-triazine–2,4-diyl]bis(oxy)]bis[2,6-di-tert-butylphenol] |
Additive |
Plastics, rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1090 |
202-918-9 |
101-14-4 |
|
3,3'-dichloro–4,4'-diamino-diphenylmethane |
Monomer or other reactant |
Rubber |
5,0 - expressed as primary aromatic amines |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1091 |
212-677-1 |
843-55-0 |
|
4,4'-dioxydiphenyl–1,1'-cyclohexane |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1092 |
204-279-1 |
118-82-1 |
|
4,4'-methylene-bis-(2,6-di-tert-butylphenol) |
Additive |
Plastics |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2031 |
||||||||||||||||||||
|
1093 |
204-124-8 |
116-09-6 |
|
1-hydroxypropan-2-one |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1094 |
205-617-0 |
144-15-0 |
|
acetyl-tri-2-ethylhexyl-citrate |
Additive |
Plastics |
150 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1095 |
201-066-5 |
77-89-4 |
|
acetyl-triethyl-citrate |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1096 |
203-470-7 |
107-18-6 |
|
allyl alcohol |
Monomer or other reactant |
Plastics, rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1097 |
211-546-6 |
661-19-8 |
|
behenic alcohol |
Additive |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1098 |
- 217-576-6 |
21112-45-8 1892-29-1 |
|
beta-amino crotonic acid ester with 2,2'-hydroxy diethylenesulfide |
Additive |
Plastics |
|
|
|
For rigid PVC and its copolymers with predominantly PVC content, maximum residual content in the final material (QM) = 20 000 mg/kg in total. |
31 December 2028 |
||||||||||||||||||||
|
1099 |
|
|
|
bis-2-tert-butyl-6-(3-tert-butyl-5-methyl-2-hydroxybenzylphenyl) terephthalate |
Additive |
Plastics |
|
|
(27) |
For polyethylene, maximum residual content in the final material (QM) = 150 mg/kg. For polypropylene, maximum residual content in the final material (QM) = 1 000 mg/kg. For polystyrene, maximum residual content in the final material (QM) = 500 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1100 |
201-624-8 |
85-70-1 |
|
butyl phthalyl butyl glycolate |
Additive |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1101 |
201-784-9 |
87-92-3 |
|
butyl tartrate |
Additive |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1102 |
269-637-1 |
68308-22-5 |
|
calcium montanate |
Additive |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1103 |
221-941-5 |
3287-12-5 |
|
dicetyl thiodipropionate |
Additive |
Rubber |
|
|
(14) |
Maximum residual content in the final material (QM) = 5 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1104 |
|
|
|
cetylpyridinium chloride |
Additive |
Plastics |
|
|
|
Maximum residual content in the final material (QM) = 4 000 mg/kg. |
31 December 2031 |
||||||||||||||||||||
|
1105 |
|
|
|
chlorinated paraffin |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1106 |
|
|
|
chlorinated polyethylene |
Additive |
Plastics |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
1107 |
|
|
|
chlorinated rubber |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1108 |
|
|
|
chloroethylvinylacetate |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1109 |
203-799-6 |
110-75-8 |
|
chloroethylvinylether |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1110 |
|
68037-39-8 |
|
chlorosulfonated polyethylene |
Additive |
Rubber |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
1111 |
215-607-8 |
1333-82-0 |
|
chromic anhydride |
Additive |
Plastics |
|
|
For chromium, refer to Annex V. |
For use as an anchor for polytetrafluoroethylene on aluminium or glass. |
31 December 2028 |
||||||||||||||||||||
|
1112 |
|
491589-22-1 |
|
cis 1,2-cyclo-hexanedicarboxylic acid, calcium salt |
Additive |
Plastics |
250 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1113 |
|
27253-31-2 |
|
cobalt neodecanoate |
Additive |
Plastics |
2,5 - expressed as neodecanoic acid. |
|
(46) For cobalt, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1114 |
|
|
|
condensation product of cinnamic aldehyde and hexamethylenediamine |
Aid to polymerisation |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1115 |
|
|
|
condensation product of n-dodecyl alcohol with ethylene oxide |
Additive |
Plastics |
|
|
|
For use as an antistatic agent for polyolefin resins, maximum residual content in the final material (QM) = 1 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1116 |
|
|
|
condensation products of formaldehyde with melamine |
Additive |
Plastics |
|
|
(15) |
|
31 December 2028 |
||||||||||||||||||||
|
1117 |
|
|
|
condensation products of formaldehyde with urea |
Monomer or other reactant |
Plastics |
|
|
(15) |
|
31 December 2028 |
||||||||||||||||||||
|
1118 |
|
|
|
condensation products of sorbitol and/or ethylene oxide |
Additive |
Plastics |
|
|
|
Provided that the product does not release ethylene glycol. |
31 December 2028 |
||||||||||||||||||||
|
1119 |
|
|
|
copolymer of methylmethacrylate with divinylbenzene |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1120 |
|
|
|
copolymer of methylmethacrylate with styrene, divinylbenzene and 1,3-butylene glycol-dimethacrylate |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1121 |
|
|
|
copolymer of methylmethacrylate-butadiene-styrene-divinylbenzene |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1122 |
|
54453-03-1 |
|
copper ethylenediaminetetraacetate |
Additive |
Plastics |
|
EDTA MTCtap = 60 μg/l. |
For copper, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1123 |
630-372-5 |
73728-37-7 |
|
cyclised rubber |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1124 |
203-630-6 |
108-93-0 |
|
cyclohexylalcohol |
Additive Polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1125 |
226-733-8 |
5459-93-8 |
|
cyclohexylethylamine |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1126 |
- |
29965-97-7 |
|
cyclooctadiene |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1127 |
|
|
|
cyclopentadiene |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1128 |
248-523-5 |
27554-26-3 |
|
di isooctyl phthalate |
Additive |
Plastics |
|
|
|
Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1129 |
236-445-4 |
13372-18-4 |
|
dicetyl phthalate |
Additive |
Plastics |
75 |
|
|
For rigid PVC, maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1130 |
237-971-7 |
14117-96-5 |
|
distearyl phthalate |
Additive |
Plastics |
75 |
|
|
For rigid PVC, maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1131 |
|
|
|
diethoxydihydroquinone |
Monomer or other reactant |
Rubber |
50 |
Phenols MTCtap = 50 μg/l. |
|
|
31 December 2028 |
||||||||||||||||||||
|
1132 |
|
|
|
diethylphthalate |
Additive |
Plastics, rubber |
|
|
|
Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. |
31 December 2031 |
||||||||||||||||||||
|
1133 |
205-450-3 |
141-04-8 |
|
diisobutyladipate |
Additive |
Plastics, rubber |
150 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1134 |
247-977-1 |
26761-40-0 |
|
diisodecylphthalate |
Additive |
Plastics, rubber |
|
|
|
Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1135 |
204-212-6 |
117-82-8 |
|
dimethoxyethylphthalate |
Additive |
Plastics |
|
|
|
Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1136 |
|
|
|
dimethyl ester of polycondensed succinic acid with 2-(4-hydroxy-2,2,6,6-tetramethyl-1-piperidyl)-ethanol |
Additive |
Plastics |
|
|
|
For polyethylene, maximum residual content of the sum of all phthalates in the final material (QM) = 3 000 mg/kg. For polypropylene, maximum residual content of the sum of all phthalates in the final material (QM) = 5 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1137 |
248-765-1 |
27987-25-3 |
|
dimethylcyclohexylphthalate |
Additive |
Plastics |
|
|
|
Maximum residual content of the sum of all phthalates in the final material (QM) = 50 000 mg/kg. |
31 December 2031 |
||||||||||||||||||||
|
1138 |
|
|
|
dimethylphenylthiuram |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2028 |
||||||||||||||||||||
|
1139 |
203-664-1 |
109-31-9 |
|
di-n-hexylazelate |
Additive |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1140 |
202-577-6 |
97-39-2 |
|
di-o-tolylguanidine |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1141 |
|
|
|
disproportionated rosin |
Additive Polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1142 |
|
|
|
distearyl-(4-hydroxy-3-methyl-5-tert-butyl)-benzyl-malonate |
Additive |
Plastics |
|
|
|
Maximum residual content in the final material (QM) = 5 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1143 |
201-555-3 |
84-72-0 |
|
ethyl phthalyl ethyl glycolate |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1144 |
|
106-90-1 |
|
acrylic acid, 2,3-epoxypropyl ester |
Additive |
Rubber |
|
|
(21) |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1145 |
|
|
|
high, medium and low density polyethylene |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1146 |
|
|
|
hydrogenated polycyclopentadiene resin |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1147 |
|
|
|
isodecyl alcohol |
Additive Polymer production aid |
Plastics, rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1148 |
|
|
|
lauryldithiopropionate |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1149 |
|
12068-40-5 |
|
lithium aluminium silicate (2:1:1) |
Additive |
Plastics |
|
|
For aluminium and lithium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
1150 |
|
|
|
melamine resins modified with butyl alcohol |
Monomer or other reactant |
Rubber |
|
|
|
For paints and varnishes. |
31 December 2028 |
||||||||||||||||||||
|
1151 |
|
694-91-7 |
|
5-methylene-2-norbornene |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1152 |
639-976-3 |
68441-63-4 |
|
methylhydroxyethylcellulose |
Additive |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1153 |
- |
51064-12-1 |
|
methylpentadiene |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1154 |
|
|
|
n-decyl n-octyl phthalate |
Additive |
Plastics |
|
|
(25) (27) |
|
31 December 2028 |
||||||||||||||||||||
|
1155 |
|
|
|
di-n-decyl phthalate |
Additive |
Plastics |
|
|
(25) (27) |
|
31 December 2031 |
||||||||||||||||||||
|
1156 |
|
|
|
Triethanolamine monolaurate |
Additive |
Plastics |
|
|
|
Use as an antistatic for polyolefins, maximum residual content in the final material (QM) = 3 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1157 |
200-820-0 |
74-89-5 |
|
Monomethylamine |
Additive |
Plastics |
2,5 |
|
|
Used with dimethyl carbonate in the manufacture of modified polymethacrylate. |
31 December 2031 |
||||||||||||||||||||
|
1158 |
260-982-3 |
57843-53-5 |
|
N,N,N',N'-tetrakis (2-hydroxypropyl)-adipamide |
Monomer or other reactant Additive Polymer production aid Aid to polymerisation |
Rubber |
|
|
|
For the production of polymer dispersions of polyolefins functionalised with acrylic and/or anhydride groups, used as coatings on metals, at a use rate of ≤ 6 % by dry weight of the dispersion. |
31 December 2031 |
||||||||||||||||||||
|
1159 |
|
|
|
N-octadecyl-beta (4'-hydroxy-3,5-di-tert-butylenyl)-propionate |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1160 |
230-451-0 |
7144-65-2 |
|
ortho-diphenylglycidyl ether |
Additive |
Plastics |
|
|
|
For films of vinyl chloride-vinylidene chloride copolymers, maximum residual content in the final material (QM) = 3 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1161 |
241-313-4 |
17281-74-2 |
|
palmitoyl benzoyl methane |
Additive |
Plastics |
|
|
|
For rigid PVC and its copolymers, maximum residual content in the final material (QM) = 5 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1162 |
204-259-2 |
118-55-8 |
|
phenyl salicylate |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1163 |
|
70750-58-2 |
|
polybetapinene |
Additive |
Rubber |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
1164 |
|
|
|
polybutylene terephthalate |
Additive Polymer production aid |
Plastics |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
1165 |
|
|
|
polychlorotrifluoroethylene |
Monomer or other reactant |
Plastics |
|
|
(38) |
|
31 December 2028 |
||||||||||||||||||||
|
1166 |
|
|
|
polyester derived from the condensation of adipic acid and ethylene glycol |
Monomer or other reactant |
Plastics |
|
|
(2) |
|
31 December 2028 |
||||||||||||||||||||
|
1167 |
607-461-2 |
24938-37-2 |
|
polyethylene adipate |
Additive |
Plastics |
|
|
|
|
31 December 2034 |
||||||||||||||||||||
|
1168 |
|
9004-99-3 |
|
polyethylene glycol monostearate |
Additive |
Plastics |
|
|
(2) |
Provided that the product does not release mono- and diethylene glycols. |
31 December 2037 |
||||||||||||||||||||
|
1169 |
|
|
|
polyethylene glycol terephthalate |
Monomer or other reactant |
Plastics |
|
|
(2) |
|
31 December 2028 |
||||||||||||||||||||
|
1170 |
|
36221-42-8 |
|
polypropylene adipate |
Additive |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1171 |
|
9003-20-7 |
|
polyvinyl acetate |
Monomer or other reactant |
Plastics, coatings |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
1172 |
|
|
|
polyvinyl butyral |
Monomer or other reactant |
Plastics, coatings |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1173 |
|
|
|
polyvinyl chloride |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
1174 |
|
|
|
polyvinyl ethyl ether |
Additive |
Plastics, adhesives, coatings |
|
|
|
Viscosity 0,5-0,8 cP at 1 % in benzene at 20 °C. |
31 December 2028 |
||||||||||||||||||||
|
1175 |
|
9003-44-5 |
|
polyvinyl isobutyl ether |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1176 |
|
|
|
polyvinyl tert-butyl ether |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1177 |
|
9002-85-1 |
|
polyvinylidene chloride |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2037 |
||||||||||||||||||||
|
1178 |
|
|
|
potassium salt of maleic acid semiesterified with cetyl alcohol |
Additive |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1179 |
|
|
|
Reaction product of 4-methylphenol with dicyclopentadiene and subsequent alkylation with isobutyl |
Additive |
Rubber |
1500 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1180 |
|
|
|
Reaction product of N-phenyl-N'-(1-3-dimethylbutyl)p-phenylenediamine and tert-C10-C13 glycidyl thioether with predominantly C12 content |
Additive |
Rubber |
1,0 - expressed as primary aromatic amines |
|
|
Maximum dosage = 2,4 % (w/w). Only for contact times ≤ 10 min and temperatures ≤ 40 °C. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
1181 |
268-213-3 |
68037-49-0 |
|
sodium alkyl (C10-C18) sulfonate |
Additive |
Plastics |
|
|
|
Use as an antistatic agent in PVC, maximum residual content in the final material (QM) = 15 000 mg/kg. Use as an antistatic agent in polystyrene, maximum residual content in the final material (QM) = 25 000 mg/kg. Use as an emulsifying agent in PVC and its copolymers, maximum residual content in the final material (QM) = 20 000 mg/kg. Use as an emulsifying agent in polystyrene, maximum residual content in the final material (QM) = 50 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1182 |
209-406-4 |
577-11-7 |
|
sodium dioctylsulfosuccinate |
Additive |
Plastics |
|
|
|
For polyethylene, maximum residual content in the final material (QM) = 10 000 mg/kg. |
31 December 2031 |
||||||||||||||||||||
|
1183 |
|
|
|
sodium dodecylbenzenesulfonate |
Additive |
Plastics |
|
|
|
In the case of gaskets and mastics, maximum residual content in the final material (QM) = 20 000 mg/kg. |
31 December 2031 |
||||||||||||||||||||
|
1184 |
|
29704-46-9 |
|
sodium sulforicinate |
Additive |
Plastics |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1185 |
205-481-2 205-777-1 |
141-33-3 150-88-9 |
|
sodium butylxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) |
|
31 December 2028 |
||||||||||||||||||||
|
1186 |
|
|
|
zinc butylxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) For zinc, refer to Annex V. |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1187 |
205-440-9 |
140-90-9 |
|
sodium ethylxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) |
|
31 December 2031 |
||||||||||||||||||||
|
1188 |
|
|
|
zinc ethylxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) For zinc, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1189 |
|
|
|
sodium isopropylxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) |
|
31 December 2028 |
||||||||||||||||||||
|
1190 |
|
|
|
zinc isopropylxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) For zinc, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1191 |
|
|
|
sodium methylxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) |
|
31 December 2028 |
||||||||||||||||||||
|
1192 |
|
|
|
zinc methylxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) For zinc, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1193 |
|
|
|
sodium pentamethylenxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) |
|
31 December 2028 |
||||||||||||||||||||
|
1194 |
|
|
|
zinc pentamethylenxanthogenate |
Monomer or other reactant |
Rubber |
|
|
(47) For zinc, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1195 |
|
|
|
sodium dibutyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||||||||||||
|
1196 |
|
|
|
zinc dibutyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For zinc, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1197 |
|
|
|
copper dibutyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For copper, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1198 |
|
|
|
sodium diethyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||||||||||||
|
1199 |
|
13681-87-3 |
|
copper diethyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For copper, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1200 |
|
|
|
sodium dimethyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||||||||||||
|
1201 |
|
137-29-1 |
|
copper dimethyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For copper, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1202 |
|
|
|
sodium ethylphenyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2028 |
||||||||||||||||||||
|
1203 |
238-677-1 |
14634-93-6 |
|
zinc ethylphenyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For zinc, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1204 |
|
|
|
copper ethylphenyldithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For copper, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1205 |
|
13878-54-1 |
|
zinc pentamethylenedithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For zinc, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1206 |
|
|
|
copper pentamethylenedithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) For copper, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1207 |
232-360-1 |
8007-43-0 |
|
sorbitan sesquioleate |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1208 |
229-781-8 |
6729-96-0 |
|
stearyl dithiopropionate |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1209 |
|
|
|
stearyl-(3,5-dimethyl-4-hydroxy-benzyl)thioglycolate |
Additive |
Plastics |
|
|
|
Maximum residual content in the final material (QM) = 5 000 mg/kg. |
31 December 2028 |
||||||||||||||||||||
|
1210 |
202-387-3 |
95-05-6 |
|
tetraethylthiuram monosulfide |
Monomer or other reactant Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2028 |
||||||||||||||||||||
|
1211 |
203-841-3 |
111-17-1 |
|
thiodipropionic acid |
Additive |
Rubber |
|
|
(14) |
|
31 December 2031 |
||||||||||||||||||||
|
1212 |
|
|
|
triacetin |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1213 |
201-071-2 |
77-94-1 |
|
tributylcitrate |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1214 |
|
|
|
tris-(2,4-di-tert-butyl phenyl) diphosphite |
Additive |
Rubber |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2028 |
||||||||||||||||||||
|
1215 |
|
1184-84-5 |
|
vinylsulfonic acid |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1216 |
|
|
|
vinylsulfonic amide |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1217 |
232-723-4 |
9010-69-9 |
|
zinc resinate |
Additive |
Plastics |
|
|
For zinc, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1218 |
|
78-67-1 |
|
2,2'-azobis(isobutyronitrile) |
Aid to polymerisation |
Plastics |
|
|
|
Maximum dosage = 0,2 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1219 |
|
2372-21-6 |
|
tert-butylperoxy isopropyl carbonate |
Polymer production aid Aid to polymerisation |
Plastics |
0,1 |
|
|
Maximum dosage = 0,5 % (w/w). |
31 December 2031 |
||||||||||||||||||||
|
1220 |
|
111-92-2 |
|
di-n-butylamine |
Aid to polymerisation |
Plastics, rubber |
1,0 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1221 |
|
113693-69-9 |
|
tetramethyl-bis(4-hydroxyphenyl)methane (TMBPF), reaction product with epichlorohydrin (= TMBPF-diglycidyl ether or TMBPF-DGE) |
Monomer or other reactant |
Coatings |
|
Epichlorohydrin MTCtap = 0.1 μg/l. |
(48) (49) |
|
31 December 2028 |
||||||||||||||||||||
|
1222 |
|
3844-45-9 |
|
C.I. Food Blue 2 (or: triarylmethane; C.I. No 42090) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1223 |
|
1934-21-0 |
|
C.I. Food Yellow 4 (or: tartrazine (E102); C.I. No 19140) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1224 |
|
12227-89-3; 1317-61-9 |
|
C.I. Pigment Black 11 (or: iron oxide black; C.I. No 77499) |
Additive |
All |
|
|
For iron, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1225 |
|
68186-91-4 |
|
C.I. Pigment Black 28 (or: copper chromite; C.I. No 77428) |
Additive |
All |
|
|
For chromium and copper, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1226 |
|
12062-81-6 |
|
C.I. Pigment Black 33, (or: iron manganese trioxide; C.I. No 77537) |
Additive |
All |
|
|
For iron and manganese, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1227 |
|
147-14-8 |
|
C.I. Pigment Blue 15 (or: phthalocyanine blue (incl. 15:1, 15:2, 15:3, 15:4); C.I. No. 74160) |
Additive |
All |
|
|
For copper, refer to Annex V. |
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1228 |
|
1345-16-0 |
|
C.I. Pigment Blue 28 (or: cobalt aluminate; C.I. No. 77346) |
Additive |
All |
|
|
For aluminium and cobalt, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1229 |
|
57455-37-5 |
|
C.I. Pigment Blue 29 (or: ultramarine blue; C.I. No. 77007) |
Additive |
All |
|
|
For aluminium, refer to Annex V. |
|
31 December 2028 |
||||||||||||||||||||
|
1230 |
|
68187-11-1 |
|
C.I. Pigment Blue 36 (or: cobalt chromite; C.I. No. 77343) |
Additive |
All |
|
|
For aluminium, chromium and cobalt, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1231 |
|
68412-74-8 |
|
C.I. Pigment Blue 74 (or: cobalt zinc silicate; C.I. No. 77366) |
Additive |
All |
|
|
For cobalt and zinc, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1232 |
|
12068-86-9 |
|
C.I. Pigment Brown 11 (or: magnesium ferrite; C.I. No. 77495) |
Additive |
All |
|
|
For iron, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1233 |
|
68186-90-3 |
|
C.I. Pigment Brown 24 (or: chromium antimony titanate; C.I. No. 77310) |
Additive |
All |
|
|
For antimony and chromium, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1234 |
|
12737-27-8 |
|
C.I. Pigment Brown 29 (or: chromium iron oxide; C.I. No. 77500) |
Additive |
All |
|
|
For chromium and iron, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1235 |
|
1308-38-9 |
|
C.I. Pigment Green 17 (or: chromium(III)oxide; C.I. No. 77288) |
Additive |
All |
|
|
For chromium, refer to Annex V. |
|
31 December 2031 |
||||||||||||||||||||
|
1236 |
|
1328-53-6 |
|
C.I. Pigment Green 7 (or: phthalocyanine green; C.I. No. 74260) |
Additive |
All |
|
|
For copper, refer to Annex V. |
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1237 |
|
3520-72-7 |
|
C.I. Pigment Orange 13 (or: diazo ; C.I. No. 21110) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1238 |
|
1309-37-1 |
|
C.I. Pigment Red 101 (or: iron(III)oxide; C.I. No. 77491) |
Additive |
All |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1239 |
|
12656-85-8 |
|
C.I. Pigment Red 104 (or: lead chromate/molybdate/sulfate; C.I. No. 77605) |
Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1240 |
|
3049-71-6 |
|
C.I. Pigment Red 178 (or: perylene red) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1241 |
|
40618-31-3 82643-43-4 |
|
C.I. Pigment Red 214 (or: condensation azo) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1242 |
|
52238-92-3 |
|
C.I. Pigment Red 242 (or: disazo condensation; C.I. No. 20067) |
Additive |
All |
|
|
(38) |
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
1243 |
|
43035-18-3 |
|
C.I. Pigment Red 247 (or: monoazo; C.I. No. 15915) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1244 |
|
6358-87-8 |
|
C.I. Pigment Red 38 (or: diazo; C.I. No. 21120) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1245 |
|
5281-04-9 |
|
C.I. Pigment Red 57:1 (D & C Red 7) (or: monoazo; C.I. No. 15850:1) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1246 |
|
12769-96-9 |
|
C.I. Pigment Violet 15 (or: ultramarine violet; C.I. No. 77007) |
Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1247 |
|
6358-30-1 |
|
C.I. Pigment Violet 23 (or: oxazine; C.I. No. 51319) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
1248 |
|
1345-05-7 |
|
C.I. Pigment White 5 (or: lithopone (coprecipitate of barium sulfate and zinc sulfide) ; C.I. No. 77115 |
Additive |
All |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1249 |
|
5590-18-1 |
|
C.I. Pigment Yellow 110 (or: aminoketone; C.I. No. 56280) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1250 |
269-103-8 |
68187-51-9 |
|
C.I. Pigment Yellow 119 (or: zinc ferrite; C.I. No. 77496) |
Additive |
All |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1251 |
603-331-4 |
129423-54-7 |
|
C.I. Pigment Yellow 191 (or: monoazo; C.I. No. 18795) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1252 |
232-353-3 |
8007-18-9 |
|
C.I. Pigment Yellow 53 (or: nickel antimony titanate; C.I. No. 77788) |
Additive |
All |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1253 |
|
6528-34-3 |
|
C.I. Pigment Yellow 65 (or: monoazo; C.I. No. 11740) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1254 |
|
8005-02-5 |
|
C.I. Solvent Black 7 (or: azine; C.I. No. 50415:1) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||||||||||||
|
1255 |
201-353-5 |
81-48-1 |
|
C.I. Solvent Violet 13 (or: anthraquinone; C.I. No. 60725) |
Additive |
All |
|
|
|
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||||||||||||
|
1256 |
|
109-58-0 |
|
(2-aminoethyl)carbamic acid |
Aid to polymerisation |
Rubber |
|
|
|
Only to be used in elastomers having vinylidene fluoride as a monomer. Maximum residual content in the final material (QM) = 30 g/kg. |
31 December 2028 |
||||||||||||||||||||
|
1257 |
|
36-86-8 |
|
1,1-bis(tert-butylperoxy)cyclohexane |
Aid to polymerisation |
Rubber |
0,1 |
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1258 |
|
95-35-2 |
|
1,3-bis(2-benzothiazolylmercaptomethyl) urea |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1259 |
|
2212-81-9 |
|
1,3-bis(tert-butylperoxyisopropyl)benzene |
Aid to polymerisation |
Rubber |
0,1 |
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1260 |
|
105-55-5 |
|
1,3-diethylthiourea |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1261 |
|
7691-02-3 |
|
1,3-divinyltetramethyldisilazane |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1262 |
|
102-78-3 |
|
2-(2,6-dimethylmorpholinothio) benzthiazole |
Aid to polymerisation |
Rubber |
|
|
(43) |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1263 |
|
102-77-2 |
|
2-(morpholinothio)benzothiazole |
Aid to polymerisation |
Rubber |
150 |
|
(43) |
Maximum residual content in the final material (QM) = 30 g/kg. |
31 December 2031 |
||||||||||||||||||||
|
1264 |
|
87-97-8 |
|
2,6-di-tert-butyl-4-(methoxymethyl)phenol |
Additive |
Rubber |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1265 |
|
2668-47-5 |
|
2,6-di-tert-butyl-4-phenylphenol |
Additive |
Rubber |
|
For the MTCtap values of degradation products, refer to Table 4. |
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1266 |
|
95-30-7 |
|
2-benzothiazyl-N,N-diethylthiocarbamyl sulfide |
Aid to polymerisation |
Rubber |
|
|
(43) |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1267 |
|
96-45-7 |
|
2-mercaptoimidazoline |
Aid to polymerisation |
Rubber |
2,5 |
|
|
Maximum residual content in the final material (QM) = 30 g/kg. |
31 December 2028 |
||||||||||||||||||||
|
1268 |
|
26511-61-5 |
|
3,3-bis(tert-butylperoxy)butanoic acid, n-butyl ester |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1269 |
|
19262-37-4 |
|
4,4'-bis(aminocyclohexyl)methane carbamate |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1270 |
|
101-70-2 |
|
4,4'-dimethoxydiphenylamine |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1271 |
|
95-80-7 |
|
4-methyl-m-phenylenediamine |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1272 |
|
15570-10-2 |
|
4-tert-butyl-2-methylthiophenol |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1273 |
|
4545-30-6 |
|
4-tert-butylthiophenol, zinc salt |
Additive |
Rubber |
|
|
For zinc, refer to Annex V. |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1274 |
|
140-04-5 |
|
acetylricinoleic acid, butyl ester |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1275 |
|
141-17-3 |
|
adipic acid, bis[2-(2-butoxyethoxy)-ethyl) ester |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1276 |
|
2451-84-5 |
|
adipic acid, dibenzyl ester |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1277 |
|
105-97-5 |
|
adipic acid, didecyl ester |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1278 |
|
27178-16-1 |
|
adipic acid, diisodecyl ester |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1279 |
|
1330-86-5 |
|
adipic acid, diisooctyl ester |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1280 |
|
110-29-2 |
|
adipic acid, n-decyl n-octyl ester |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1281 |
|
123-77-3 |
|
azodicarbonamide |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1282 |
201-255-2 |
80-17-1 |
|
benzenesulfonohydrazide |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1283 |
|
|
|
bis(2-hydroxy-3-tert-octyl-5-methylphenyl)methane |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1284 |
246-709-0 |
25176-75-4 |
|
caproic acid, diester with triethyleneglycol |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1285 |
203-361-4 |
106-10-5 |
|
caprylic acid, diester with triethyleneglycol |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1286 |
|
61789-98-8 |
|
cork |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1287 |
|
3399-73-3 |
|
cyclohexylethylamine |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1288 |
|
149-82-6 |
|
dibutyldithiocarbamic acid, N,N-dimethylcyclohexylamine salt |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1289 |
|
109-89-7 |
|
diethylamine |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1290 |
|
502-55-6 |
|
diethylxanthogen disulfide |
Additive or polymer production aid |
Rubber |
|
|
(47) |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1291 |
|
123-81-9 |
|
ethyleneglycol bis(mercaptoacetate) |
Aid to polymerisation |
Rubber |
|
|
|
Maximum residual content in the final material (QM) = 30 g/kg. |
31 December 2031 |
||||||||||||||||||||
|
1292 |
|
36290-04-7 |
|
formaldehyde-2-naphthalenesulfonic acid, copolymer, sodium salt |
Additive Polymer production aid |
Rubber |
|
|
(15) |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2034 |
||||||||||||||||||||
|
1293 |
|
93-35-4 |
|
formaldehyde-phenol, copolymer |
Additive |
Rubber |
|
|
(15) |
The copolymer cannot contain additives that are not listed in the organics EU Positive List. |
31 December 2028 |
||||||||||||||||||||
|
1294 |
|
68476-37-9 |
|
glue, of animal origin |
Additive or polymer production aid |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1295 |
|
16941-12-1 |
|
hexachloroplatinic acid |
Additive or polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1296 |
|
999-97-3 |
|
hexamethyldisilazane |
Additive or polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1297 |
|
143-06-6 |
|
hexamethylenediamine carbamate |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1298 |
213-680-0 |
1000-90-4 |
|
isopropylxanthogenate, zinc salt |
Aid to polymerisation |
Rubber |
|
|
(47) For zinc, refer to Annex V. |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1299 |
|
106-18-3 |
|
lauric acid, butyl ester |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1300 |
|
28693-00-7 |
|
monochloroacetic acid, ester with 5-(hydroxymethyl)-bicyclo[2.2.1]hept-2-ene |
Monomer or other reactant |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1301 |
|
|
|
montan wax, consisting of: 1) montanic acids C26-C32, 2) esters thereof with ethyleneglycol and/or 1,3-butanediol 3) and/or calcium salts |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1302 |
|
10591-84-1 |
|
N,N'-dimethyldiphenylthiuram disulfide |
Aid to polymerisation |
Rubber |
|
|
(42) |
Maximum residual content in the final material (QM) = 30 g/kg. |
31 December 2031 |
||||||||||||||||||||
|
1303 |
|
|
|
N-alkyl(C14-C18)-N,N’,N’-triacetoyl-1,3-diaminopropane |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1304 |
|
|
|
N-phenyl-N’-isohexyl-p-phenylenediamine |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1305 |
|
142-77-8 |
|
oleic acid, butyl ester |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1306 |
|
7620-75-9 |
|
oleic acid, dibutylamine salt |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1307 |
|
1912-84-1 |
|
oleic acid, tin(II) salt |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1308 |
|
117-97-5 |
|
pentachlorothiophenol, zinc salt |
Additive or polymer production aid |
Rubber |
|
|
For zinc, refer to Annex V. |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1309 |
|
98-77-1 |
|
pentamethylenedithiocarbamic acid, piperidine salt |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1310 |
|
136-04-9 |
|
pentamethylenedithiocarbamic acid, potassium salt |
Aid to polymerisation |
Rubber |
|
|
(42) For zinc, refer to Annex V. |
Maximum residual content in the final material (QM) = 30 g/kg. |
31 December 2028 |
||||||||||||||||||||
|
1311 |
|
107-71-1 |
|
peracetic acid, tert-butyl ester |
Aid to polymerisation |
Rubber |
0,1 |
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1312 |
|
89-03-8 |
|
petrolatum |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1313 |
|
117-84-0 |
|
phthalic acid, di-n-octyl ester |
Additive |
Rubber |
300 |
|
(25) (27) |
|
31 December 2028 |
||||||||||||||||||||
|
1314 |
|
26762-92-5 |
|
p-menthane hydroperoxide |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1315 |
|
|
|
p-nonylphenyl phosphite, 2,2-bis(3-tert-butyl-4-hydroxyphenyl) propane ester |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1316 |
|
25101-03-5 |
|
polypropyleneglycol adipate |
Additive |
Rubber |
|
|
(30) |
|
31 December 2037 |
||||||||||||||||||||
|
1317 |
232-299-0 |
8002-13-9 |
|
rapeseed oil |
Additive |
Rubber |
|
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1318 |
|
27214-90-0 |
|
sebacic acid, diisooctyl ester |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1319 |
|
2432-87-3 |
|
sebacic acid, di-n-octyl ester |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||||||||||||
|
1320 |
|
1344-08-7 |
|
sodium polysulfide |
Additive or polymer production aid |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1321 |
|
|
|
soybean oil, sulfur treated (factice) |
Additive |
Rubber |
250 |
|
|
|
31 December 2028 |
||||||||||||||||||||
|
1322 |
|
93-73-2 |
|
tetrabutylthiuram monosulfide |
Aid to polymerisation |
Rubber |
|
|
(42) |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1323 |
|
7772-99-8 |
|
tin chloride |
Aid to polymerisation |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||||||||||||
|
1324 |
|
19484-26-5 |
|
tridecyl mercaptan |
Additive or polymer production aid |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||||||||||||
|
1325 |
|
117-56-8 |
|
triethanolamine phosphate |
Additive |
Rubber |
500 |
|
|
Only to be used in mould release agents. |
31 December 2028 |
||||||||||||||||||||
Table 2
European positive lists of groups of starting substances for organic materials
|
EUPL Number |
EC Number |
CAS Number |
FCM substance Number (A) |
Starting substance group name |
Technical function (B) |
Drinking water contact materials (C) |
Maximum Tolerable Concentration at the tap in organic materials (MTCtap, organics) in μg/l |
Total Maximum Tolerable Concentration at the tap (MTC(T)tap, organics) in μg/l (D) |
Conditions of use |
Expiry date |
|||||||||||
|
Value for the starting substance |
Values for other relevant chemical species (E) |
||||||||||||||||||||
|
1326 |
|
|
3 |
alcohols, aliphatic, monohydric, saturated, linear, primary (C4-C22) |
Monomer or other reactant |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1327 |
|
|
4 |
mixture of (40 % w/w) 2,2,4- trimethylhexane–1,6-diisocyanate and (60 % w/w) 2,4,4-trimethylhexane–1,6-diisocyanate |
Monomer or other reactant |
All |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in final product expressed as isocyanate moiety. Verification of compliance by residual content per food contact surface area (QMA). |
31 December 2034 |
||||||||||
|
1328 |
|
|
5 |
trialkyl(C5-C15) acetic acid, 2,3- epoxypropyl ester |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product expressed as epoxy group. Molecular weight of the epoxy group is 43 Da. |
31 December 2031 |
||||||||||
|
1329 |
|
|
6 |
trialkyl acetic acid (C7-C17), vinyl esters |
Monomer or other reactant |
All |
2,5 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2031 |
||||||||||
|
1330 |
|
|
8 |
acetylated mono- and diglycerides of fatty acids |
Additive or polymer production aid |
All |
|
|
(31) |
|
31 December 2031 |
||||||||||
|
1331 |
|
|
9 |
acids, C2-C24, aliphatic, linear, monocarboxylic from natural oils and fats, and their mono-, di- and triglycerol esters (branched fatty acids at naturally occurring levels are included) |
Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1332 |
|
|
10 |
acids, C2-C24, aliphatic, linear, monocarboxylic, synthetic and their mono-, di- and triglycerol esters |
Polymer production aid Additive Other (processing aid) |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1333 |
|
|
11 |
acids, aliphatic, monocarboxylic (C6-C22), esters with polyglycerol |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||
|
1334 |
|
|
12 |
acids, fatty, from animal or vegetable food fats and oils |
Additive or polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1335 |
|
|
13 |
alcohols, aliphatic, monohydric, saturated, linear, primary (C4-C24) |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1336 |
|
|
14 |
n-alkyl(C10-C13)benzenesulfonic acid |
Additive Polymer production aid |
All |
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1337 |
|
|
15 |
alkyl, linear with even number of carbon atoms (C12-C20) dimethylamines |
Additive or polymer production aid |
All |
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1338 |
|
|
16 |
alkyl(C8-C22)sulfonic acids |
Additive Polymer production aid |
All |
300 |
|
|
|
31 December 2031 |
||||||||||
|
1339 |
|
|
17 |
alkyl(C8-C22)sulfuric acids, linear, primary with an even number of carbon atoms |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1340 |
|
|
19 |
N,N-bis(2-hydroxyethyl)alkyl (C8-C18)amine |
Additive Polymer production aid |
All |
|
|
(7) |
|
31 December 2031 |
||||||||||
|
1341 |
|
|
20 |
N,N-bis(2-hydroxyethyl)alkyl (C8-C18)amine hydrochlorides |
Additive or polymer production aid |
All |
|
|
(7) |
|
31 December 2031 |
||||||||||
|
1342 |
|
|
22 |
castor oil, mono- and diglycerides |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1343 |
|
|
23 |
chlorides of choline esters of coconut oil fatty acids |
Additive or polymer production aid |
All |
45 |
|
|
Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2031 |
||||||||||
|
1344 |
|
|
25 |
cresols, butylated, styrenated |
Additive or polymer production aid |
All |
600 |
|
|
|
31 December 2031 |
||||||||||
|
1345 |
|
|
26 |
5,7-di-tert-butyl-3-(3,4- and 2,3-dimethylphenyl)-3H-benzofuran-2-one containing: a) 5,7-di-tert-butyl-3-(3,4-dimethylphenyl)-3H-benzofuran-2-one (80 to 100 % w/ w) and b) 5,7-di-tert-butyl-3-(2,3-dimethylphenyl)-3H-benzofuran-2-one (0 to 20 % w/w) |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2031 |
||||||||||
|
1346 |
|
|
27 |
9,10-dihydroxy stearic acid and its oligomers |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2028 |
||||||||||
|
1347 |
|
|
28 |
di-n-octyltin bis(n-alkyl(C10-C16) mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2031 |
||||||||||
|
1348 |
|
|
31 |
di-n-octyltin dimaleate, esterified |
Additive or polymer production aid |
All |
|
|
(10) |
|
31 December 2031 |
||||||||||
|
1349 |
|
|
38 |
glass fibres |
Additive |
All |
|
|
|
Glass according to Annex IV. |
31 December 2031 |
||||||||||
|
1350 |
|
|
40 |
glycerol, esters with acetic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1351 |
|
|
41 |
glycerol, esters with acids, aliphatic, saturated, linear, with an even number of carbon atoms (C14-C18) and with acids, aliphatic, unsaturated, linear, with an even number of carbon atoms (C16-C18) |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1352 |
|
|
42 |
glycerol, esters with butyric acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1353 |
|
|
43 |
glycerol, esters with erucic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1354 |
|
|
44 |
glycerol, esters with 12-hydroxystearic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1355 |
|
|
45 |
glycerol, esters with lauric acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1356 |
|
|
46 |
glycerol, esters with linoleic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1357 |
|
|
47 |
glycerol, esters with myristic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1358 |
|
|
48 |
glycerol, esters with nonanoic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1359 |
|
|
49 |
glycerol, esters with oleic acid |
Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1360 |
|
|
50 |
glycerol, esters with palmitic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1361 |
|
|
51 |
glycerol, esters with propionic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1362 |
|
|
52 |
glycerol, esters with ricinoleic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1363 |
|
|
53 |
glycerol, esters with stearic acid |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1364 |
|
|
65 |
mixture of 4-(2-benzoxazolyl)-4′-(5-methyl-2-benzoxazolyl)stilbene, 4,4′-bis(2-benzoxazolyl) stilbene and 4,4′-bis(5-methyl-2-benz oxazolyl)stilbene |
Additive |
All |
|
|
|
Not more than 0,05 % (w/w) (quantity of substance used/ quantity of the formulation). Mixture obtained from the manufacturing process in the typical ratio of (58-62 %):(23-27 %): (13-17 %). |
31 December 2031 |
||||||||||
|
1365 |
|
|
66 |
mono-n-octyltin tris(alkyl (C10-C16) mercaptoacetate) |
Additive or polymer production aid |
All |
|
|
(11) |
|
31 December 2031 |
||||||||||
|
1366 |
|
|
67 |
montanic acids and/or their esters with ethyleneglycol and/or with 1,3-butanediol and/or with glycerol |
Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1367 |
|
|
68 |
phosphoric acid, mono- and di-n-alkyl (C16 and C18) esters |
Additive or polymer production aid |
All |
2,5 |
|
|
|
31 December 2031 |
||||||||||
|
1368 |
|
|
69 |
phosphorous acid, tris(nonyl-and/ or dinonylphenyl) ester |
Additive |
All |
1500 |
|
|
In the absence of plasticiser, maximum residual content in the final material (QM) = 3 000 mg/kg. For butadiene-styrene copolymer, maximum residual content in the final material (QM) = 15 000 mg/kg. |
31 December 2028 |
||||||||||
|
1369 |
|
|
73 |
polyesters of 1,2-propanediol and/ or 1,3- and/or 1,4-butanediol and/ or polypropyleneglycol with adipic acid, which may be end-capped with acetic acid or fatty acids C12-C18 or n-octanol and/or n-decanol |
Additive or polymer production aid |
All |
|
|
(30) (31) |
|
31 December 2034 |
||||||||||
|
1370 |
|
|
78 |
polyethyleneglycol (EO = 1-50) monoalkylether (linear and branched, C8-C20) sulfate, salts |
Additive or polymer production aid |
All |
250 |
|
|
|
31 December 2034 |
||||||||||
|
1371 |
|
|
80 |
powders, flakes and fibres of brass, bronze, copper, stainless steel, tin, iron and alloys of copper, tin and iron |
Additive |
All |
|
|
For relevant elements, refer to Annex V. |
|
31 December 2031 |
||||||||||
|
1372 |
|
|
89 |
stearic acid, esters with ethyleneglycol |
Additive or polymer production aid |
All |
|
|
(2) |
|
31 December 2031 |
||||||||||
|
1373 |
|
50-21-5 |
99 |
lactic acid |
Monomer or other reactant Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||
|
1374 |
|
50-99-7 |
102 |
glucose |
Monomer or other reactant |
All |
|
|
|
|
31 December 2037 |
||||||||||
|
1375 |
|
57-55-6 |
109 |
1,2-propanediol |
Monomer or other reactant Additive Polymer production aid |
All |
|
|
|
|
31 December 2034 |
||||||||||
|
1376 |
|
59-02-9 10191-41-0 |
110 |
α-tocopherol |
Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||
|
1377 |
|
75-56-9 |
135 |
propylene oxide |
Monomer or other reactant |
All |
0,1 |
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product. |
31 December 2028 |
||||||||||
|
1378 |
|
107-01-7 |
224 |
2-butene |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||
|
1379 |
|
107-88-0 |
228 |
1,3-butanediol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||
|
1380 |
|
110-98-5 25265-71-8 |
257 |
dipropyleneglycol |
Monomer or other reactant |
All |
|
|
|
|
31 December 2034 |
||||||||||
|
1381 |
|
138-22-7 |
322 |
lactic acid, butyl ester |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1382 |
|
598-32-3 |
357 |
3-buten-2-ol |
Monomer or other reactant |
All |
0,1 |
|
|
Only to be used as a co-monomer for the preparation of polymeric additive. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. |
31 December 2028 |
||||||||||
|
1383 |
|
1330-43-4 |
407 |
sodium tetraborate |
Additive or polymer production aid |
All |
|
|
For boron, refer to Annex V. |
|
31 December 2034 |
||||||||||
|
1384 |
|
1332-37-2 |
409 |
iron oxide |
Additive |
All |
|
|
For iron, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1385 |
|
3724-65-0 |
467 |
crotonic acid |
Monomer or other reactant Additive |
All |
|
|
(34) |
|
31 December 2028 |
||||||||||
|
1386 |
|
4080-31-3 |
474 |
1-(3-chloroallyl)-3,5,7-triaza-1-azoniaadamantane chloride |
Additive or polymer production aid |
All |
15 |
|
|
|
31 December 2031 |
||||||||||
|
1387 |
|
|
501 |
aluminium fibres, flakes and powders |
Additive |
All |
|
|
For aluminium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1388 |
|
7631-86-9 |
504 |
silicon dioxide |
Additive Polymer production aid |
All |
|
|
|
For synthetic amorphous silicon dioxide: primary particles of 1 – 100 nm which are aggregated to a size of 0,1 – 1 μm which may form agglomerates within the size distribution of 0,3 μm to the mm size. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2037 |
||||||||||
|
1389 |
|
7664-93-9 |
511 |
sulfuric acid |
Additive Polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||
|
1390 |
|
7704-34-9 |
514 |
sulfur |
Aid to polymerisation |
All |
|
|
|
|
31 December 2034 |
||||||||||
|
1391 |
|
7771-44-0 |
518 |
arachidonic acid |
Monomer or other reactant |
All |
|
|
|
|
31 December 2028 |
||||||||||
|
1392 |
|
7772-98-7 |
519 |
sodium thiosulfate |
Additive or polymer production aid |
All |
|
|
(18) |
|
31 December 2034 |
||||||||||
|
1393 |
|
9003-11-6 106392-12-5 |
551 |
poly(ethylene propylene) glycol |
Other (processing aid) |
All |
|
|
|
|
31 December 2028 |
||||||||||
|
1394 |
|
63148-62-9 |
575 |
polydimethylsiloxane (MW > 6 800 Da) |
Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) |
All |
|
|
|
Viscosity at 25 °C not less than 100 cSt (100 × 10-6 m2/s). |
31 December 2034 |
||||||||||
|
1395 |
|
10377-51-2 |
588 |
lithium iodide |
Additive or polymer production aid |
All |
|
|
(6) For lithium, refer to Annex V. |
|
31 December 2031 |
||||||||||
|
1396 |
|
11104-61-3 |
593 |
cobalt oxide |
Additive or polymer production aid |
All |
|
|
For cobalt, refer to Annex V. |
|
31 December 2031 |
||||||||||
|
1397 |
|
11129-60-5 |
594 |
manganese oxide |
Additive |
All |
|
|
For manganese, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1398 |
|
12004-14-7 37293-22-4 |
598 |
calcium sulfoaluminate |
Additive |
All |
|
|
For aluminium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||
|
1399 |
|
12626-88-9 |
606 |
manganese hydroxide |
Additive or polymer production aid |
All |
|
|
For manganese, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1400 |
|
12751-22-3 |
607 |
iron phosphide |
Additive or polymer production aid |
Plastics |
|
|
For iron, refer to Annex V. |
Only to be used in PET polymers and copolymers. |
31 December 2031 |
||||||||||
|
1401 |
|
13463-67-7 |
610 |
titanium dioxide |
Additive Polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||
|
1402 |
|
17194-00-2 |
625 |
barium hydroxide |
Additive or polymer production aid |
All |
|
|
For barium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||
|
1403 |
|
25013-16-5 |
635 |
tert-butyl-4-hydroxyanisole |
Additive |
All |
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1404 |
|
25322-68-3 |
638 |
polyethyleneglycol |
Monomer or other reactant Additive Polymer production aid Aid to polymerisation Other (processing aid) |
All |
|
|
|
|
31 December 2034 |
||||||||||
|
1405 |
|
25513-64-8 |
641 |
mixture of (35-45 % w/w) 1,6-diamino-2,2,4-trimethylhexane and (55-65 % w/w)1,6-diamino-2,4,4-trimethylhexane |
Monomer or other reactant |
All |
2,5 |
|
|
|
31 December 2034 |
||||||||||
|
1406 |
|
68515-48-0 28553-12-0 |
728 |
phthalic acid, diesters with primary, saturated C8-C10 branched alcohols, more than 60 % C9 |
Additive or polymer production aid |
All |
|
|
(25) (31) |
Only to be used as:
|
31 December 2037 |
||||||||||
|
1407 |
|
68855-54-9 |
734 |
diatomaceous earth, soda ash flux-calcined |
Additive or polymer production aid |
All |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||
|
1408 |
|
73138-82-6 |
741 |
resin acids and rosin acids |
Monomer or other reactant Other (processing aid) |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1409 |
|
|
789 |
hydrogenated homopolymers and/or copolymers made of 1-hexene and/or 1-octene and/or 1-decene and/or 1-dodecene and/or 1-tetradecene (MW: 440–12000) |
Additive or polymer production aid |
All |
|
|
|
Average molecular weight not less than 440 Da. Viscosity at 100 °C not less than 3,8 cSt (3,8 × 10-6 m2/s). |
31 December 2034 |
||||||||||
|
1410 |
|
90751-07-8 82451-48-7 |
790 |
poly(6-morpholino-1,3,5-triazine- 2,4-diyl)-[(2,2,6,6-tetramethyl-4- piperidyl)imino)] hexa-methylene- [(2,2,6,6-tetramethyl-4-piperidyl)imino)] |
Additive Polymer production aid |
All |
250 |
|
|
Average molecular weight not less than 2 400 Da. Residual content of morpholine < 30 mg/kg, of N,N′-bis(2,2,6,6-tetramethylpiperidin-4-yl)hexane–1,6-diamine < 15 000 mg/kg, and of 2,4-dichloro-6-morpholino-1,3,5-triazine < 20 mg/kg. |
31 December 2034 |
||||||||||
|
1411 |
|
|
799 |
polyethyleneglycol (EO = 1-50) ethers of linear and branched primary (C8-C22) alcohols |
Polymer production aid Other (processing aid) |
All |
90 |
|
|
In compliance with the maximum ethylene oxide content as laid down in the purity criteria for food additives in Commission Regulation (EU) No 231/2012. |
31 December 2037 |
||||||||||
|
1412 |
|
|
801 |
acids, C2-C24, aliphatic, linear, monocarboxylic, from natural oils and fats, lithium salt |
Additive or polymer production aid |
All |
|
|
For lithium, refer to Annex V. |
|
31 December 2031 |
||||||||||
|
1413 |
|
|
805 |
titanium dioxide, coated with a copolymer of n-octyltrichlorosilane and [aminotris(methylenephosphonic acid), penta sodium salt] |
Additive or polymer production aid |
All |
|
|
|
The content of the surface treatment copolymer of the coated titanium dioxide is less than 1 % w/w. |
31 December 2031 |
||||||||||
|
1414 |
|
|
810 |
neopentyl glycol, diesters and monoesters with benzoic acid and 2-ethylhexanoic acid |
Additive or polymer production aid |
All |
250 |
|
(31) |
|
31 December 2031 |
||||||||||
|
1415 |
|
|
815 |
trimethylolpropane, mixed triesters and diesters with benzoic acid and 2-ethylhexanoic acid |
Additive or polymer production aid |
All |
250 |
|
(31) |
|
31 December 2031 |
||||||||||
|
1416 |
|
|
878 |
acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with branched alcohols, aliphatic, monohydric, saturated, primary (C3-C22) |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1417 |
|
|
879 |
acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with alcohols, linear, aliphatic, monohydric, saturated, primary (C1-C22) |
Additive or polymer production aid |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1418 |
|
|
880 |
acids, fatty (C8-C22), esters with pentaerythritol |
Polymer production aid Other (processing aid) |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1419 |
|
128-44-9 |
902 |
1,2-benzisothiazol-3(2H)-one 1,1-dioxide, sodium salt |
Additive or polymer production aid |
All |
|
|
|
The substance shall comply with the specific purity criteria as set out in Commission Regulation (EU) No 231/2012. |
31 December 2034 |
||||||||||
|
1420 |
|
|
924 |
trimethylolpropane, mixed triesters and diesters with n-octanoic and n-decanoic acids |
Additive or polymer production aid |
Plastics |
2,5 |
|
|
Only for use in PET. |
31 December 2037 |
||||||||||
|
1421 |
|
939402-02-5 |
974 |
phosphorous acid, mixed 2,4-bis(1,1-dimethylpropyl)phenyl and 4-(1,1-dimethylpropyl)phenyl triesters |
Additive or polymer production aid |
All |
500 - expressed as the sum of the phosphite and phosphate forms of the substance, 4-tert-amylphenol and 2,4-di-tert-amylphenol 50 - for 2,4-di-tert-amylphenol |
|
|
|
31 December 2037 |
||||||||||
|
1422 |
|
|
1046 |
zinc oxide, nanoparticles, coated with [3-(methacryloxy)propyl] trimethoxysilane (EUPL No 0695) |
Additive or polymer production aid |
Plastics |
|
|
For zinc, refer to Annex V. |
Only to be used in unplasticised polymers. The restrictions and specifications specified for substance with EUPL Number 0695 shall be respected. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2037 |
||||||||||
|
1423 |
|
|
1053 |
fatty acids, C16-C18 saturated, esters with dipentaerythritol |
Additive or polymer production aid |
All |
|
|
|
Only to be used when produced from a fatty acid precursor that is obtained from edible fats or oils. |
31 December 2037 |
||||||||||
|
1424 |
|
7695-91-2 58-95-7 |
1055 |
α-tocopherol acetate |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used as antioxidant in polyolefins. The substance or its hydrolysis products are authorised food additives and compliance with Article 11(3) of Commission Regulation (EU) No 10/2011 shall be verified. |
31 December 2037 |
||||||||||
|
1425 |
|
|
1062 |
mixture composed of 97 % tetraethyl orthosilicate (TEOS) with CAS No. 78-10-4 and 3 % hexamethyldisilazane (HMDS) with CAS No. 999-97-3 |
Monomer or other reactant |
All |
|
|
|
Only to be used for the production of recycled PET and at up to 0,12 % (w/w). |
31 December 2037 |
||||||||||
|
1426 |
|
|
1075 |
montmorillonite clay modified with hexadecyltrimethylammonium bromide |
Additive or polymer production aid |
Plastics |
|
|
|
Only to be used as an additive at up to 4,0 % w/w in polylactic acid for cold water applications. Can form nanoform platelets thinner than 100 nm in one or two dimensions. Such platelets must be aligned parallel to the polymer surface and fully integrated into the polymer. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1427 |
|
|
1077 |
titanium dioxide surface-treated with fluoride-modified alumina |
Additive or polymer production aid |
All |
|
|
|
Only to be used at up to 25,0 % w/w, including in the nanoform. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1428 |
|
|
|
castor oil fatty acids, dehydrated |
Monomer or other reactant Other (processing aid) |
Rubber, coatings |
|
|
|
|
31 December 2034 |
||||||||||
|
1429 |
|
61790-39-4 |
|
castor oil fatty acids, hydrogenated |
Monomer or other reactant Additive |
Coatings, lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1430 |
|
55965-84-9 |
|
5-chloro-2-methyl-2H-isothiazol-3-one (CAS No. 26172-55-4) and 2-methyl-2H-isothiazol-3-one (CAS No. 2682-20-4), mixture (3:1) |
Other (in-can preservative) |
Coatings |
7,5 |
|
|
Restriction = 0,025 mg/dm2. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
||||||||||
|
1431 |
|
68938-15-8 |
|
fatty acids, coco hydrogenated |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2034 |
||||||||||
|
1432 |
|
110-54-3 |
|
n-hexane, incl. structural isomers up to 40% (cyclohexane < 3 %) List No. 925-292-5 |
Polymer production aid |
All |
250 |
|
|
MTC does not need to be verified when process temperature > 100 °C. |
31 December 2031 |
||||||||||
|
1433 |
|
93685-81-5 |
|
isododecane (main isomer: 2,2’,4,6,6’-pentamethylheptane) |
Polymer production aid |
Plastics |
2,5 |
|
|
|
31 December 2034 |
||||||||||
|
1434 |
|
926-099-9 |
|
stone wool |
Additive |
Rubber |
|
|
|
Diameter > 1 μm (average diameter 5-30 μm). If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1435 |
|
|
|
acrylic acid, esters with alcohols, monohydric, aliphatic, saturated, C1-C18 |
Monomer or other reactant |
Coatings |
300 - expressed as acrylic acid |
|
(21) |
|
31 December 2031 |
||||||||||
|
1436 |
|
|
|
adipic acid, esters with alcohols, monohydric, aliphatic, primary, saturated, (C6-C12) |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1437 |
|
|
|
addition products of trivinylcyclohexane and alpha, omega-dihydrogen-polyhydrogenmethyldimethylsiloxanes |
Monomer or other reactant |
Silicone |
|
|
|
Maximum dosage = 10% (w/w). |
31 December 2031 |
||||||||||
|
1438 |
|
|
|
alkadienes (C3-C8) |
Monomer or other reactant |
Coatings |
|
|
|
Maximum residual content in the final material (QM) = 1 mg/kg in the product. |
31 December 2031 |
||||||||||
|
1439 |
|
|
|
alkoxysilanes with functional groups, e.g. vinyl, methacryl, amino or glycidyl groups |
Polymer production aid |
Plastics |
|
|
|
Maximum dosage = 0,5 % (w/w) based on the filler, or maximum 0,3 % (w/w) based on the plastic component |
31 December 2031 |
||||||||||
|
1440 |
|
|
|
alkylarylsulfonic acid |
Polymer production aid |
Plastics |
|
|
|
Maximum dosage = 3 % (w/w). |
31 December 2031 |
||||||||||
|
1441 |
|
|
|
alkyl(C8-C18)benzene sulfonates, sodium salts |
Polymer production aid |
Rubber |
|
|
(41) |
|
31 December 2031 |
||||||||||
|
1442 |
|
|
|
alkyl(C8-C18)naphthalene sulfonates, sodium salts |
Polymer production aid |
Rubber |
|
|
(41) |
|
31 December 2031 |
||||||||||
|
1443 |
|
|
|
esters of alkyl(C1-C8)-silicic acid or orthosilicic acid with aliphatic monohydric alcohols (C2-C4) and the monomethyl ether of ethanediol (methylglycol) and their condensation products |
Aid to polymerisation |
Silicone |
|
|
|
Maximum dosage = 3 % (w/w). |
31 December 2031 |
||||||||||
|
1444 |
|
|
|
amide of aliphatic carboxylic acids, C8-C22 |
Polymer production aid |
Silicone |
|
|
|
Maximum dosage = 1,5 % (w/w). |
31 December 2031 |
||||||||||
|
1445 |
|
|
|
3-aminocrotonic acid, esters with butyleneglycol |
Additive |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1446 |
|
|
|
3-aminocrotonic acid, esters with mono- or dihydric alcohols |
Additive |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1447 |
|
|
|
carbon fibres |
Additive |
Rubber |
|
|
|
Carbon fibres according to EUPL Number 2041, Annex IV. |
31 December 2031 |
||||||||||
|
1448 |
|
|
|
condensation products of ethylene oxide with alcohols (C3-C18), phenolalkyl (C4-C9), and their sulfonated, sulfurated or phosphated derivated |
Additive Polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1449 |
|
|
|
cyclic organopolysiloxane with methylgroups, alone or n-alkyl (C2-C32)-group |
Monomer or other reactant (base oil) |
Lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1450 |
|
|
|
α,ω-dicarboxylic acids (C6-C12), aliphatic, unbranched |
Monomer or other reactant |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1451 |
|
|
|
fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C8-C22, with a maximum content of 2 % unsaponifiable matter), as compounds with bis(2-hydroxyethyl)amine |
Additive Polymer production aid |
Plastics |
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1452 |
|
|
|
fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C8-C22, with a maximum content of 2 % unsaponifiable matter), amides of |
Additive Polymer production aid Aid to polymerisation |
Plastics, rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1453 |
|
|
|
fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C8-C22, with a maximum content of 2 % unsaponifiable matter), esterified with alcohols, monohydric, primary, unbranched, saturated, C4-C18, as well as oleyl alcohol |
Additive Polymer production aid |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1454 |
|
9003-36-5 |
|
formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (Novolac glycidyl ether, NOGE) |
Monomer or other reactant |
Coatings |
2,5 - expressed as the sum of NOGE and its hydrolysis products |
bisphenol F MTCtap = 2,5 μg/l epichlorohydrin MTCtap = 0,1 μg/l |
(15) (49) |
Only to be used in powder coatings. |
31 December 2031 |
||||||||||
|
1455 |
|
|
|
glycerol esters with linear fatty acids saturated or not with an even number of carbon C8-C20 and/or adipic acid, citric acid, oxystearin acid and ricinoleic acid |
Additive |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1456 |
|
|
|
methacrylic acid, esters with alcohols, monohydric, aliphatic saturated, C1-C18 |
Monomer or other reactant |
Rubber |
300 - expressed as methacrylic acid |
|
(22) |
|
31 December 2031 |
||||||||||
|
1457 |
|
|
|
mono-n-octyltin tris(maleic acid half ester), prepared with C1-C18, primary, unbranched, saturated alcohols |
Additive Polymer production aid |
Plastics |
|
|
(11) |
|
31 December 2031 |
||||||||||
|
1458 |
|
|
|
mono-n-octyltin tris[monoalkyl(C1-C18) maleate] |
Additive Polymer production aid |
Plastics |
|
|
(11) |
|
31 December 2031 |
||||||||||
|
1459 |
|
|
|
organopolysiloxanes, containing methylgroups on each silicon atom which can be partially replaced by alkenyl(C2-C32)groups, alkyl (C2-C32)groups, hydroxylgroups, hydrogen, disubstituted alkylamines and/or hydroxylated alkylgroups, acetoxy and/or alkoxy groups and their condensation products with polyethyleneglycol and/or polypropyleneglycol, fluorinated alkylgoups, and phenylgroups |
Monomer or other reactant Additive (polymeric) |
Coatings, silicone |
|
|
|
|
31 December 2031 |
||||||||||
|
1460 |
|
|
|
organopolysiloxanes, linear and branched, with methyl groups alone and/or n-alkyl(C2-C32)-, and/or phenyl-2, and/or vinyl-, and/or hydroxyl-, and/or alkoxy(C1-C4)-, and/or hydrogen-, and/or carboalkoxyalkyl(-(CH2)2-17-C(O)-O-(CH2)0-17CH3)-, and/or hydroxyalkyl(C1-C3)-groups |
Monomer or other reactant Additive (polymeric) |
Rubber, silicone |
|
|
|
It may not contain cyclic polysiloxanes that beside the phenyl group bear a hydrogen atom or a methyl group at the same silicon atom. |
31 December 2031 |
||||||||||
|
1461 |
|
|
|
organopolysiloxanes, linear or branched, as mentioned PM/REF No. 69848, but in addition with up to max. 5 % hydrogen and/or alkoxy(C2-C4) and/or carboalkoxyalkyl (-(CH2)2-17-C(O)-O-(CH2)0-17CH3)- and/or hydroxyalkyl(C1-C3) groups attached to the silicon atom |
Monomer or other reactant Additive (polymeric) |
Rubber, silicone |
|
|
|
|
31 December 2031 |
||||||||||
|
1462 |
|
|
|
organopolysiloxanes, linear or branched and/or cyclic, with methyl groups alone or with n-alkyl(C2-C32), phenyl and/or hydroxyl groups attached to the silicon atom, and their condensation products with polyethylene and/or polypropyleneglycol |
Monomer or other reactant Additive (polymeric) |
Rubber, silicone |
|
|
|
It may not contain cyclic polysiloxanes that beside the phenyl group bear a hydrogen atom or a methyl group at the same silicon atom. |
31 December 2031 |
||||||||||
|
1463 |
|
68083-14-7 73138-88-2 68440-81-3 |
|
organopolysiloxanes, linear or branched with methyl- or phenylgroups |
Monomer or other reactant (base oil) |
Plastics, lubricants |
|
|
|
|
31 December 2037 |
||||||||||
|
1464 |
|
9016-00-6 63148-62-9 68037-74-1 |
|
organopolysiloxanes, linear or branched with methylgroups |
Monomer or other reactant (base oil) |
Plastics, lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1465 |
|
|
|
organopolysiloxanes with vinyl groups attached to the silicon atom |
Monomer or other reactant Additive (polymeric) |
Rubber, silicone |
|
|
|
|
31 December 2031 |
||||||||||
|
1466 |
|
64741-56-6 |
|
petroleum residues, vacuum distilled |
Monomer or other reactant (resin) |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1467 |
|
92062-05-0 |
|
petroleum residues, thermal cracked vacuum |
Monomer or other reactant (resin) |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1468 |
|
|
|
platinum complexes |
Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||
|
1469 |
|
|
|
polyalcoxyesters of acids, fatty with an even number of carbon (C8-C24) |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1470 |
|
68037-01-4 |
|
poly 1-decene hydrated |
Monomer or other reactant (base oil) |
Lubricants |
|
|
|
Impurities of hydrocarbons with number of Carbon smaller than 30 not more than 1,5 %, free of naphthene, aromatics and PAH. |
31 December 2034 |
||||||||||
|
1471 |
|
|
|
polydienic resin, synthetic |
Additive |
All |
|
|
|
|
31 December 2031 |
||||||||||
|
1472 |
|
|
|
polydimethyl siloxanes and polydimethyl silicones, 3-aminopropyl-group terminated, polymers with 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane |
Monomer or other reactant Additive (polymeric) |
Rubber, silicone |
|
|
(16) |
Note conditions of use for 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane (EUPL Number 0410) and 1-amino-3-aminomethyl-3,5,5-trimethylcyclohexane (EUPL Number 0391). |
31 December 2031 |
||||||||||
|
1473 |
|
|
|
polydimethyl siloxanes and polydimethyl silicones, 3-aminopropyl-group terminated, polymers with bis(4-isocyanatocyclohexyl)methane |
Monomer or other reactant Additive (polymeric) |
Rubber, silicone |
|
|
(16) |
Note conditions of use for bis(4-isocyanatocyclohexyl)methane (EUPL Number 0420) and bis(4-aminocyclohexyl)methane (EUPL Number 0366). |
31 December 2031 |
||||||||||
|
1474 |
|
|
|
polyethylene glycol ethers of monohydric aliphatic alcohols (C12-C20) and of alkylphenols (C2-C9) |
Polymer production aid |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||
|
1475 |
|
9002-98-6 |
|
polyethyleneimine |
Additive |
Plastics, coatings |
|
|
|
For polypropylene as an anchoring agent: ≤ 0,05 μg/dm2 provided that the product does not release ethyleneimine. |
31 December 2034 |
||||||||||
|
1476 |
|
|
|
polyethylene oxide (8-14), esterified with lauric acid, oleic acid, ricinoleic acid and/or stearic acid |
Monomer or other reactant Other |
Rubber, coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1477 |
|
|
|
polyethylene oxide, molecular weight > 200 (pEO) |
Additive Polymer production aid |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1478 |
|
|
|
polyethylene oxide(4-14)ether of octyl- and/or nonylphenol |
Polymer production aid |
Plastics, rubber |
250 |
|
|
|
31 December 2031 |
||||||||||
|
1479 |
|
|
|
polyethylene oxide(4-14)ethers of monohydric, primary, unbranched, saturated C12-C18 alcohols |
Additive |
Plastics |
250 |
|
|
|
31 December 2031 |
||||||||||
|
1480 |
|
|
|
polypropylene oxide, esterified with lauric acid, oleic acid, ricinoleic acid and/or stearic acid |
Polymer production aid Aid to polymerisation |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1481 |
|
|
|
polysaccharides |
Polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1482 |
|
9003-53-6 |
|
polystyrene (with pentane as expansion agent) |
Monomer or other reactant (resin) |
Plastics, rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1483 |
|
|
|
polyterpenes |
Additive |
Lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1484 |
|
25213-24-5 |
|
polyvinyl alcohol, manufactured by saponification of polyvinyl acetate, with a degree of saponification ≥ 20 % |
Polymer production aid |
Plastics |
|
|
|
Maximum dosage = 1 % (w/w). |
31 December 2034 |
||||||||||
|
1485 |
|
|
|
polyvinyl alcohol, partially acetylated with < 20 % acetyl groups and a K-value of > 40 |
Polymer production aid |
Coatings, silicone |
|
|
|
|
31 December 2031 |
||||||||||
|
1486 |
|
71011-24-0 |
|
quaternary ammonium compounds, benzyl(hydrogenated tallow alkyl)dimethyl, chlorides, compounds with bentonite |
Polymer production aid Additive |
Lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1487 |
|
68953-58-2 |
|
quaternary ammonium compounds, bis(hydrogenated tallow alkyl)dimethyl, salts with bentonite |
Polymer production aid Additive |
Lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1488 |
|
|
|
reticulated cationic polyalkyleneamine
|
Additive |
Plastics |
|
|
(49) |
|
31 December 2031 |
||||||||||
|
1489 |
|
|
|
sebacic acid, reaction product with stearylamide, neutralised with calcium hydroxide |
Polymer production aid Additive |
Lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1490 |
|
|
|
silanols, with at least one hydroxyl group and one or more methyl, vinyl or phenyl groups on every silicon atom |
Monomer or other reactant |
Rubber |
0,1 |
|
|
|
31 December 2031 |
||||||||||
|
1491 |
|
68988-56-7 |
|
silicium dioxide, reaction product with trimethylchlorosilane and isopropyl alcohol |
Polymer production aid |
Lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1492 |
|
9006-65-9 |
|
silicone oils (organopolysiloxanes with methyl and/or phenyl groups) |
Monomer or other reactant (base oil) Additive (polymeric) |
Rubber, coatings, lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1493 |
|
|
|
sorbitol esters with linear fatty acids, saturated or not, with an even number of carbon C8-C20 |
Additive |
Coatings |
0,1 |
|
|
|
31 December 2031 |
||||||||||
|
1494 |
|
|
|
stearic acid mono or di esters with ethanediol and/or ether bis(2-hydroxyethyl) and/or triethyleneglycol |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1495 |
|
|
|
titanic acid, esters with isobutanol, n-butanol and the enolate of ethylacetoacetate |
Aid to polymerisation |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||
|
1496 |
|
26780-96-1 |
|
2,2,4-trimethyl–1,2-dihydrochinolin (polymerised) |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1497 |
|
|
|
trivinyl cyclohexane and α,ω-dihydrogenpolyhydrogenmethyldimethyl-siloxanes, addition products of |
Monomer or other reactant Additive (polymeric) |
Silicone |
|
|
|
Maximum dosage = 10 % (w/w). |
31 December 2031 |
||||||||||
|
1498 |
|
|
|
urea-formaldehyde condensation products |
Monomer or other reactant (resin) Additive Polymer production aid |
Plastics, coatings |
|
|
(15) |
|
31 December 2031 |
||||||||||
|
1499 |
|
|
|
vinyl esters of monohydric, saturated, aliphatic carboxylic acids, C2-C20 |
Monomer or other reactant |
Plastics |
2,5 |
|
|
|
31 December 2031 |
||||||||||
|
1500 |
|
2098907-70-9 |
|
siloxane and silicone, dimethyl, hydroxyterminated (MW > 7400 Da), ethers with C16-C18 fatty acids esters with pentaerythritol |
Polymer production aid Other (processing aid) |
Rubber |
|
|
|
The polymer may contain siloxane and silicone, dimethyl, hydroxy-terminated (MW > 7400 Da), fatty acids, and C16-C18-fatty acids ester of pentaerythritol. |
31 December 2031 |
||||||||||
|
1501 |
|
1318-02-1 |
|
zeolites, natural and synthetic, sodium salts |
Additive Aid to polymerisation |
Plastics, rubber, coatings |
|
|
For aluminium, refer to Annex V. |
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1502 |
|
|
|
hydrocarbons, C10-C14, aromatic content ≤1 % |
Additive |
Plastics, coatings |
|
|
|
Only to be used if the production process temperature is above the boiling point. |
31 December 2031 |
||||||||||
|
1503 |
921-728-3 |
64741-66-8 |
|
hydrocarbons, C7-C9, isoalkanes, with EC No. 921-728-3, boiling point 90 to 150 °C, negligible solubility in water |
Additive |
All |
|
|
|
Only to be used if the production process temperature is above the boiling point. |
31 December 2031 |
||||||||||
|
1504 |
920-750-0 |
64742-49-0 |
|
hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics, with EC No. 920-750-0, boiling point 90 to 165 °C, log Po/w=2.2-5.2, insoluble in water |
Additive |
All |
|
|
|
Only to be used if the production process temperature is above the boiling point. |
31 December 2031 |
||||||||||
|
1505 |
|
|
|
titanium hydroxide (orthotitanic acid) |
Additive |
All, except rubber |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1506 |
|
119345-04-9 |
|
benzene, 1,1'-oxybis-,tetrapropylene derivatised, sulfonated sodium salts |
Additive Polymer production aid |
Coatings |
450 |
For the MTCtap values of degradation products, refer to Table 4. |
|
|
31 December 2031 |
||||||||||
|
1507 |
|
61789-44-4 |
|
castor oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1508 |
|
61790-37-2 |
|
tallow oil fatty acids |
Monomer or other reactant (base oil) |
Coatings, lubricants |
|
|
|
|
31 December 2031 |
||||||||||
|
1509 |
|
67762-90-7 |
|
silicon dioxide, reaction product with polydimethylsiloxane |
Additive Polymer production aid |
Coatings, lubricants |
|
|
|
For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. |
31 December 2031 |
||||||||||
|
1510 |
|
68308-51-0 |
|
cotton seed oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1511 |
|
68424-45-3 |
|
linseed oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1512 |
|
68611-44-9 |
|
silicon dioxide, reaction product with dimethyldicholorosilane |
Polymer production aid Additive |
Lubricants |
|
|
|
For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. |
31 December 2031 |
||||||||||
|
1513 |
|
68909-20-6 |
|
silicon dioxide, reaction product with hexamethyldisilazane |
Polymer production aid Additive |
Lubricants |
|
|
|
For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. |
31 December 2031 |
||||||||||
|
1514 |
|
84625-38-7 |
|
sunflower oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1515 |
|
9003-35-4 |
|
phenolformaldehyde resins |
Aid to polymerisation |
Rubber |
|
|
(15) |
MW > 1 000 Da. |
31 December 2031 |
||||||||||
|
1516 |
|
91744-27-3 |
|
glycerides, mono-, di- and tri castor oil |
Additive Polymer production aid |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1517 |
|
92044-96-7 |
|
olive oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1518 |
|
93165-31-2 |
|
rapeseed oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1519 |
|
|
|
corn oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1520 |
|
|
|
dicyclopentadiene-indene-styrene-alpha-methylstyrene-vinyltoluene-isobutylene-copolymer, hydrogenated |
Additive Polymer production aid |
Coatings |
250 |
|
|
|
31 December 2031 |
||||||||||
|
1521 |
|
|
|
fish oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1522 |
|
|
|
hempseed oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1523 |
|
|
|
palm oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1524 |
|
|
|
palmkernel oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1525 |
|
|
|
perilla oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1526 |
|
|
|
poppy-seed oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1527 |
|
|
|
pumpkin seed oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1528 |
|
|
|
ricinoleic acid, dehydrogenated |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1529 |
|
|
|
safflower oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1530 |
|
|
|
sesame oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1531 |
|
|
|
walnut oil fatty acids |
Monomer or other reactant |
Coatings |
|
|
|
|
31 December 2031 |
||||||||||
|
1532 |
|
|
|
1,4-butanediol, trimethylolpropane, 2,3-butylene glycol, hydroquinone dihydroxydiethylether and their condensation derivatives with propylene oxide |
Monomer or other reactant |
Plastics |
|
|
(29) |
|
31 December 2031 |
||||||||||
|
1533 |
|
|
|
1,5-naphthylenediisocyanate, or 4,4'-diphenylmethanediisocyanate, or toluylenediisocyanate |
Monomer or other reactant |
Plastics |
|
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2031 |
||||||||||
|
1534 |
|
|
|
acrylonitrile copolymers with divinylbenzene (except ion exchange resins) |
Additive |
Plastics |
0,1 - expressed as acrylonitrile monomer |
|
|
|
31 December 2031 |
||||||||||
|
1535 |
|
|
|
acrylic, fumaric, maleic and methacrylic esters |
Additive |
Plastics |
|
|
(21) |
|
31 December 2031 |
||||||||||
|
1536 |
|
|
|
beta amino crotonic acid esters with 1,4-butylene glycol and with C16-C18 fatty alcohols |
Additive |
Plastics |
|
|
|
For rigid PVC and its copolymers with predominantly plasticiser-free PVC content: maximum dosage = 3 % (w/w). |
31 December 2031 |
||||||||||
|
1537 |
|
|
|
butylated, styrenated, butylstyrene cresols with an average molecular weight 312 |
Additive |
Plastics |
|
|
|
Maximum dosage = 0,5 % (w/w). |
31 December 2031 |
||||||||||
|
1538 |
|
|
|
calcium, lithium, manganese, aluminium, zinc, sodium, potassium, magnesium stearates, palmitates, ricinoleates, heptanoates, octoates |
Additive |
Plastics |
|
|
For aluminium, lithium, manganese and zinc, refer to Annex V. |
|
31 December 2031 |
||||||||||
|
1539 |
|
|
|
castor oil and its dehydration, hydrogenation and/or condensation products with adipic, sebacic and phthalic acids |
Additive |
Plastics |
|
|
(27) |
|
31 December 2031 |
||||||||||
|
1540 |
|
|
|
clays |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1541 |
|
|
|
condensation products of formaldehyde with:
melamine |
Monomer or other reactant |
Rubber |
|
MTCtap for formaldehyde: 0.15 MTCtap for phenols: 0.05 |
(15) |
|
31 December 2031 |
||||||||||
|
1542 |
|
|
|
condensation products of polyoxyethylene-3 with fatty alcohols C10-C18 |
Additive |
Plastics |
|
|
|
For polyolefin films: maximum dosage = 1 % (w/w). |
31 December 2031 |
||||||||||
|
1543 |
|
|
|
copolymers of alpha-methylstyrene with vinyltoluene |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1544 |
|
|
|
copolymers of butadiene with styrene and divinylbenzene |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1545 |
|
|
|
copolymers of styrene and/or alpha-methylstyrene with acrylonitrile |
Monomer or other reactant |
Plastics |
0,1 - expressed as acrylonitrile monomer |
|
|
|
31 December 2031 |
||||||||||
|
1546 |
|
|
|
copolymers of styrene and/or alpha-methylstyrene with butadiene |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1547 |
|
|
|
copolymers of styrene and/or alpha-methylstyrene with butadiene and acrylonitrile |
Monomer or other reactant |
Plastics |
0,1 - expressed as acrylonitrile monomer |
|
|
|
31 December 2031 |
||||||||||
|
1548 |
|
|
|
copolymers of styrene and/or alpha-methylstyrene with methylmethacrylate |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1549 |
|
|
|
copolymers of styrene with divinylbenzene (except ion exchange resins) |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1550 |
|
|
|
copolymers of tetrafluoroethylene with hexafluoropropylene |
Monomer or other reactant |
Plastics |
|
|
(38) |
|
31 December 2028 |
||||||||||
|
1551 |
|
|
|
copolymers of vinyl chloride with acrylonitrile |
Monomer or other reactant |
Plastics |
0,1 - expressed as vinyl chloride monomer and acrylonitrile |
|
|
Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. |
31 December 2031 |
||||||||||
|
1552 |
|
|
|
copolymers of vinyl chloride with cetylvinyl ether |
Monomer or other reactant |
Plastics |
0,1 - expressed as vinyl chloride monomer and acrylonitrile |
|
|
Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. |
31 December 2031 |
||||||||||
|
1553 |
|
|
|
copolymers of vinyl chloride with vinyl acetate modified with maleic anhydride and polyvinyl alcohol |
Monomer or other reactant |
Plastics |
0,1 - expressed as vinyl chloride monomer and acrylonitrile |
|
|
Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. |
31 December 2031 |
||||||||||
|
1554 |
|
|
|
copolymers of vinyl chloride with vinylidene chloride |
Monomer or other reactant |
Plastics |
0,1 - expressed as vinyl chloride monomer and acrylonitrile |
|
|
Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. |
31 December 2031 |
||||||||||
|
1555 |
|
|
|
copolymers of vinylidene chloride with acrylonitrile |
Monomer or other reactant |
Plastics |
0,1 - expressed as vinyl chloride monomer and acrylonitrile |
|
|
|
31 December 2031 |
||||||||||
|
1556 |
|
|
|
cresols |
Monomer or other reactant |
Rubber |
|
formaldehyde MTCtap = 150 μg/l. |
|
|
31 December 2031 |
||||||||||
|
1557 |
|
85116-97-8 |
|
diethylene glycol ester with stearic acid |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1558 |
|
|
|
diphenylcarbonate with phosgene |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1559 |
|
|
|
emulsion silicones |
Additive |
Rubber |
|
|
|
Composition according to silicones. |
31 December 2031 |
||||||||||
|
1560 |
|
|
|
epoxy resins |
Other (used in the casting process to produce cast film or moulding) |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1561 |
|
|
|
ester products between rosin, maleic and citric acid with C3-C6 polyalkaloids |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1562 |
|
|
|
ester-like condensation products between rosin, maleic acid and citric acid with polyalcohols containing three to six C atoms in the molecule |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1563 |
|
|
|
esters of fatty acids with polyglycerol |
Additive |
Plastics |
|
|
|
For PVC and polyolefin stretch films. |
31 December 2031 |
||||||||||
|
1564 |
|
|
|
esters of glycerol with behenic and arachidic acids |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1565 |
|
|
|
esters of saturated aliphatic acids C6-C22 with saturated aliphatic monohydroxyl alcohols C2-C20, including oleic alcohol |
Additive |
Plastics |
|
|
|
Maximum residual content in the final material (QM) = 15 000 mg/kg. |
31 December 2031 |
||||||||||
|
1566 |
|
|
|
ethylene copolymers with butene |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1567 |
|
|
|
ethylene copolymers with propylene |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1568 |
|
|
|
ethylenediamine with fatty acid |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1569 |
|
|
|
glycerol, esters with caprylic and n-decanoic acids |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1570 |
|
|
|
glycerophthalic resins modified with oil and styrene and/or alpha-methylstyrene |
Monomer or other reactant |
Plastics |
|
|
(27) |
|
31 December 2031 |
||||||||||
|
1571 |
|
|
|
hexamethylenediamine with adipic and/or sebacic acid |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1572 |
|
|
|
hydrogenated homopolymers and/or copolymers of 1-decene and/or 1-dodecene and/or 1-octene |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1573 |
|
|
|
iso-octyl-epoxy-stearate |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1574 |
|
|
|
linseed oils epoxidised using good industrial practice |
Additive |
Plastics |
|
|
|
For PVC and PVDC (epoxidised linseed oil iodine number < 6; oxirane oxygen content < 10 %). |
31 December 2031 |
||||||||||
|
1575 |
|
|
|
maleic resins modified with rosin and abietic acid |
Monomer or other reactant |
Plastics, rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1576 |
|
|
|
mercaptobenzimidazole and zinc salts |
Monomer or other reactant |
Rubber |
|
|
For zinc, refer to Annex V. |
Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1577 |
|
63231-60-7 |
|
microcrystalline waxes |
Additive |
Rubber |
|
|
|
The sample under examination is considered suitable for use if it does not exceed the following absorption limits per centimetre optical pathlength:
|
31 December 2031 |
||||||||||
|
1578 |
|
|
|
mixture of dimethyltin-s,s'-bis (isooctylmecraptoacetate) and mono methyltin-s,s'-tris (isooctylmecraptoacetate) |
Additive |
Plastics |
|
|
(9) |
For use in PVC and rigid PVC copolymers free of plasticisers. |
31 December 2031 |
||||||||||
|
1579 |
200-338-0 246-770-3 |
57-55-6 25265-71-8 |
|
mono- and dipropylene glycols |
Monomer or other reactant |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1580 |
277-291-8 - |
73138-45-1 - |
|
montanic acid ester with ethanediol and 1,3 butanediol |
Additive |
Plastics |
|
|
|
Provided that the product does not release ethylene glycol. |
31 December 2031 |
||||||||||
|
1581 |
|
|
|
octylalcohols |
Monomer or other reactant |
Plastics, rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1582 |
|
|
|
organopolysiloxanes with 1,2-propanediol groups |
Monomer or other reactant Additive or polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1583 |
|
|
|
organopolysiloxanes with 1,3-propanediol groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1584 |
|
|
|
organopolysiloxanes with 2,4-toluidene diisocyanate groups |
Monomer or other reactant |
Rubber |
5,0 - expressed as primary aromatic amines |
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2031 |
||||||||||
|
1585 |
|
|
|
organopolysiloxanes with 2,6-toluidene diisocyanate groups |
Monomer or other reactant |
Rubber |
5,0 - expressed as primary aromatic amines |
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2031 |
||||||||||
|
1586 |
|
|
|
organopolysiloxanes with ethylene oxide groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1587 |
|
|
|
organopolysiloxanes with fluorinated groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1588 |
|
|
|
organopolysiloxanes with methyl groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1589 |
|
|
|
organopolysiloxanes with pentaerythritol groups |
Monomer or other reactant Additive or polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1590 |
|
|
|
organopolysiloxanes with phenyl groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1591 |
|
|
|
organopolysiloxanes with propylene oxide groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1592 |
|
|
|
organopolysiloxanes with sorbitol groups |
Monomer or other reactant Additive or polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1593 |
|
|
|
organopolysiloxanes with tetrafluoroethylene groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1594 |
|
|
|
organopolysiloxanes with triethylene glycol groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1595 |
|
|
|
organopolysiloxanes with trimethylolpropane groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1596 |
|
|
|
organopolysiloxanes with triphenylmethanediisocyanate groups |
Monomer or other reactant |
Rubber |
5,0 - expressed as primary aromatic amines |
|
(16) |
Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). |
31 December 2031 |
||||||||||
|
1597 |
|
|
|
organopolysiloxanes with vinyl groups |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1598 |
|
|
|
pentenes |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1599 |
|
|
|
phenolic resins alone or modified with glycerophthalic, epoxy or polyvinyl butyral resins or with butyl alcohol |
Monomer or other reactant |
Plastics |
|
|
|
For paints and varnishes. |
31 December 2031 |
||||||||||
|
1600 |
|
|
|
phenols and/or methylphenols condensed with styrene and/or alpha-methyl-styrene |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1601 |
|
|
|
polyacetal resins |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1602 |
|
|
|
polyamide resulting from the polymerisation of 1,3,5-benzene tricarbonyl chloride with 1,3-benzene diamine |
Monomer or other reactant |
Plastics |
|
|
|
For film thickness ≤ 4 μm in reverse osmosis/ultrafiltration plants. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1603 |
|
|
|
polyglycols |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1604 |
|
|
|
polymers derived from the esterification of azelaic acid with n-hexyl and 2-ethylhexyl alcohols |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1605 |
|
|
|
polymers of butyl, ethyl and methyl acrylates and methyl methacrylates |
Monomer or other reactant |
Plastics |
|
|
|
Product must be washed with water at room temperature for 2 hours (except films and coatings < 0,2 mm thick). |
31 December 2031 |
||||||||||
|
1606 |
|
|
|
saturated, unsaturated and hydroxylated fatty acids (C8-C24) |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1607 |
|
|
|
silica and hydrated silicas |
Additive |
Rubber |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
|
1608 |
|
|
|
silicone oils |
Additive Other (processing aid) |
Plastics, rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1609 |
|
|
|
sodium pentamethylenedithiocarbamate |
Aid to polymerisation |
Rubber |
|
|
(42) |
|
31 December 2031 |
||||||||||
|
1610 |
|
|
|
sorbitol esters with erucic, lauric, linoleic, myristic, oleic, pelargonic, palmitic, ricinoleic, stearic, 12-hydroxystearic acids |
Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1611 |
|
|
|
soya polymers |
Monomer or other reactant Additive |
Plastics |
|
|
|
|
31 December 2031 |
||||||||||
|
1612 |
|
|
|
terpenic resins from dipentene, alfapinene, betapinene |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1613 |
|
|
|
terpolymers of ethylene, vinyl acetate and carbon monoxide |
Additive |
Plastics |
|
|
|
For use in PVC. |
31 December 2031 |
||||||||||
|
1614 |
|
|
|
urea resins modified with butyl alcohol |
Monomer or other reactant |
Rubber |
|
|
|
For use in paints and varnishes. |
31 December 2031 |
||||||||||
|
1615 |
|
|
|
xylenols |
Monomer or other reactant |
Rubber |
|
formaldehyde MTCtap = 150 μg/l. |
|
|
31 December 2031 |
||||||||||
|
1616 |
|
|
|
alkyl(C8-C18)sulfonic acids, sodium salts |
Additive Polymer production aid |
Rubber |
1500 - expressed as the sum of alkyl(C8-C18)sulfuric and alkyl(C8-C18)benzenesulfonic acids |
|
|
|
31 December 2031 |
||||||||||
|
1617 |
|
|
|
alkyl(C8-C18)sulfuric acids, sodium salts |
Additive Polymer production aid |
Rubber |
1500 - expressed as the sum of alkyl(C8-C18)sulfuric and alkyl(C8-C18)benzenesulfonic acids |
|
|
|
31 December 2031 |
||||||||||
|
1618 |
|
|
|
chlorobutadienes |
Monomer or other reactant |
Rubber |
250 |
|
|
|
31 December 2031 |
||||||||||
|
1619 |
|
63393-89-5 |
|
coumarone-indene resins |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||
|
1620 |
|
|
|
fatty acids, saturated and unsaturated, with an even number of C-atoms, C8-C22, unsaponifiables content not to exceed 2%, esters with pentaerythritol |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||
|
1621 |
|
|
|
fatty acids, linear, saturated and unsaturated, with an even number of C-atoms, C8-C22, unsaponifiables content not to exceed 2% |
Aid to polymerisation |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1622 |
|
|
|
fibres of pure cellulose |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||
|
1623 |
|
|
|
Fibres of regenerated cellulose in accordance with Commission Directive 2007/42/EC |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||
|
1624 |
|
82-74-2 |
|
hydrocarbon waxes, paraffin and microcrystalline (hydrogenated) |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1625 |
|
|
|
organopolysiloxanes (silicones), with two methyl groups to each silicon atom, molecular weight 13,5-30 |
Additive or polymer production aid |
Rubber |
750 |
|
|
|
31 December 2031 |
||||||||||
|
1626 |
|
8020-83-5 |
|
paraffin mineral oils |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1627 |
|
|
|
phthalic acid, esters with triethyleneglycol |
Additive |
Rubber |
|
|
(2) (27) |
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||
|
1628 |
|
|
|
polyethyleneglycol (4-14) ethers of monohydric, linear, saturated, primary alcohols, C12-C18 |
Additive Polymer production aid |
Rubber |
250 |
|
|
|
31 December 2031 |
||||||||||
|
1629 |
|
|
|
polyethyleneglycol (4-14) ethers of octyl- and/or nonylphenol |
Additive Polymer production aid |
Rubber |
250 |
|
|
|
31 December 2031 |
||||||||||
|
1630 |
|
|
|
polyethyleneglycol (8-14), esters with lauric, oleic, ricinoleic, and/or stearic acid |
Additive or polymer production aid |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1631 |
|
73398-64-8 |
|
quaternary ammonium compounds, di-C8-C18-alkyldimethyl, chlorides |
Additive or polymer production aid |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||
|
1632 |
|
|
|
regenerated elastomers |
Additive |
Rubber |
|
|
|
Regenerated elastomer to the extent that they are derived from rubber that complies with the European positive list for organic materials. |
31 December 2031 |
||||||||||
|
1633 |
|
|
|
rosin derivatives |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1634 |
|
|
|
silanols with at least one hydroxyl group and one or more methyl groups to each silicon atom |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1635 |
|
|
|
siloxanes, with one hydrogen atom and one methyl group to each silicon atom |
Monomer or other reactant |
Silicone |
|
|
|
|
31 December 2031 |
||||||||||
|
1636 |
|
|
|
siloxanes, with two methylgroups to each silicon atom and a vinyl group to the terminal silicon atoms |
Monomer or other reactant |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1637 |
|
|
|
soot (furnace black and channel black) and other carbon products like graphite and coke powder |
Additive |
Rubber |
|
|
|
|
31 December 2031 |
||||||||||
|
1638 |
|
|
|
styrene (2 moles) condensed with 1 mole of a mixture of o-, m- and p-cresols, provided that the Brookfield viscosity of the end product is between 14 and 17 cP at 25 °C |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2028 |
||||||||||
|
1639 |
|
|
|
styrene and/or alfa-methylstyrene and/or -alkene(C3-C12)phenol and/or methylphenol reaction products |
Additive |
Rubber |
250 |
|
|
|
31 December 2028 |
||||||||||
|
1640 |
|
|
|
thioxylenols |
Additive or polymer production aid |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. |
31 December 2031 |
||||||||||
|
1641 |
|
|
|
tris(mono- and dinonylphenyl) phosphite |
Additive |
Rubber |
|
|
|
In rubbers, not for use in products in contact with warm and hot water. Tris(2-hydroxypropyl)amine impurity content not to exceed 1 %. |
31 December 2031 |
||||||||||
|
1642 |
|
|
|
hemp fibres |
|
Coatings |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||
|
1643 |
|
|
|
linen fibres |
|
Coatings |
|
|
|
If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
||||||||||
Notes:
1. Note 1: Explanation of the notes in Tables 1 and 2
The meaning of the notes provided in Tables 1 and 2 is as follows:
|
||
|
||
|
||
|
||
|
2. Note 2: Scope of an authorisation
|
i. |
Where a starting substance appearing on the list as an individual entry is also covered by a group entry, the conditions of use and specifications and expiry dates applying to this starting substance shall be those indicated in the individual entry exclusively. |
|
ii. |
Unless stated otherwise in Table 1, the following salts of authorised acids, phenols and alcohols shall be considered covered by that authorisation: aluminium, ammonium, barium, calcium, cobalt, copper, europium, gadolinium, iron, lanthanum, lithium, magnesium, manganese, potassium, sodium, terbium, and zinc. This is subject to compliance with the corresponding MTCtap, organics value for the element or ion shown in Annex V for organic materials. In certain cases, where the safety assessment indicates concerns on the use of the free acids, only the salts should be authorised by indicating in the list the name as ‘… acid(s), salts’. |
|
iii. |
Mixtures obtained by mixing authorised starting substances without a chemical reaction of the components shall be considered covered by that authorisation. |
|
iv. |
Where a starting substance appears on the list as its anhydrous form, its approval shall be considered to covers its hydrated form. |
|
v. |
In the case of any natural or synthetic polymeric substance of an authorised monomer or other reactant and that polymeric substance is not used as an additive, that polymeric substance shall be considered covered by the authorisation of that monomer or other reactant. After the first European positive list, only entries for the monomer and other reactant shall be included. |
|
vi. |
In the case of any natural or synthetic polymeric substance of an authorised monomer or other reactant and that polymeric substance has a molecular weight of at least 1 000 Da, that polymeric substance shall be considered covered by the authorisation of that monomer or other reactant when used as additives. After the first European positive list, only entries for the monomer and other reactant shall be included. As an exception, this provision shall not apply to polymers obtained from microbial fermentation. |
|
vii. |
Pre-polymers and natural or synthetic polymers, as well as their mixtures, used as monomer or other reactant incorporated in the polymer shall be considered covered by the authorisation of the monomers or other reactant required to synthesise them. After the first European positive list, only entries for the monomer or other reactant shall be included. As an exception, this provision shall not apply to polymers obtained from microbial fermentation, pre-polymers for organopolysiloxanes used in the manufacture of silicones, rubbers, lubricants and surface treatment for fillers, and pre-polymers for coatings. |
|
viii. |
After the first European positive list, only entries for a polymer shall be included in cases for which points v to vii are not applicable. |
|
ix. |
Organic cementitious constituents authorised on the European positive list of organic cementitious constituents of Annex III may be used in organic materials when used as constituents in cementitious fillers. |
|
x. |
Ceramic compositions authorised on the European positive list of composition for enamels, ceramic and other inorganic materials of Annex IV may be used as fillers in organic materials. |
|
xi. |
Fibres made of metallic compositions authorised on the European positive list of compositions for metallic materials of Annex II may be used in organic materials. |
|
xii. |
Fibres and microballs made of glass compositions authorised on the European positive list of composition for enamels, ceramics and other inorganic materials of Annex IV may be used in organic materials provided that each filament has a diameter above 1 μm and the average diameter of the filaments in the organic material is above 5 μm. |
|
xiii. |
Water may be used as a starting substance in the manufacture of organic materials that come into contact with water intended for human consumption. |
|
xiv. |
An entry in Table 1 covers a nanoform only when it is explicitly stated in the approval of that entry. |
3. Note 3: Additional conditions of use
|
i. |
Only biocidal active substances of Product-type 6 (Preservatives for products during storage) in accordance with Regulation (EU) No 528/2012 may be used as starting substances. |
|
ii. |
Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as metallic fibres, shall adhere to the requirements of Annex II. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as ceramic fillers, shall adhere to the requirements of Annex IV. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as glass fibres and microballs, shall adhere to the requirements of Annex IV. Where indicated in Table 1, entries identified with an MTC(T)tap, organics shall comply with the following: |
Table 3
Total MTC(T)tap, organics values for groups of listed starting substances
|
MTC(T)tap, organics reference in Table 1 |
MTC(T)tap, organics in μg/l |
MTC(T)tap, organics specification |
|
(1) |
300 |
expressed as acetaldehyde |
|
(2) |
1 500 |
expressed as ethyleneglycol |
|
(3) |
1 500 |
expressed as maleic acid |
|
(4) |
750 |
expressed as caprolactam |
|
(5) |
150 |
expressed as the sum of the substances |
|
(6) |
50 |
expressed as iodine |
|
(7) |
60 |
expressed as tertiary amine |
|
(8) |
300 |
expressed as the sum of the substances |
|
(9) |
9,0 |
expressed as tin (for methyltin methyltin mercaptoacetates) |
|
(10) |
0,3 |
expressed as tin (for di-n-octyltins) |
|
(11) |
60 |
expressed as tin (for mono-n-octyltins) |
|
(12) |
1 500 |
expressed as the sum of the substances |
|
(13) |
75 |
expressed as the sum of the substances |
|
(14) |
250 |
expressed as the sum of the substances and their oxidation products |
|
(15) |
750 |
expressed as formaldehyde |
|
(16) |
0,1 |
expressed as isocyanate moiety |
|
(17) |
2,5 |
expressed as the sum of the substances |
|
(18) |
500 |
expressed as SO2 |
|
(19) |
1 500 |
expressed as the sum of the substances |
|
(20) |
250 |
expressed as trimellitic acid |
|
(21) |
300 |
expressed as acrylic acid |
|
(22) |
300 |
expressed as methacrylic acid |
|
(23) |
250 |
expressed as the sum of the substances |
|
(24) |
2,5 |
expressed as the sum of mono-n-dodecyltin tris(isooctylmercaptoacetate), di-n-dodecyltin bis(isooctyl mercaptoacetate), mono-dodecyltin trichloride and di-dodecyltin dichloride) expressed as the sum of mono- and di-dodecyltin chloride |
|
(25) |
90 |
expressed as the sum of the substances |
|
(26) |
250 |
expressed as isophthalic acid |
|
(27) |
375 |
expressed as terephthalic acid |
|
(28) |
2,5 |
expressed as the sum of 6-hydroxyhexanoic acid and caprolactone |
|
(29) |
250 |
expressed as 1,4-butanol |
|
(30) |
1 500 |
expressed as the sum of the substances |
|
(31) |
3 000 |
expressed as the sum of the substances plus Diisobutyl phthalate, with synonyms 1,2-bis(2-methylpropyl) benzene–1,2-dicarboxylate or ‘DIBP’ and CAS number 84-69-5 which is not listed as an authorised substance in Table 1. However, it may co-occur with other phthalates as a consequence of its use as an aid to polymerisation and is included in group restrictions |
|
(32) |
0,1 |
expressed as eugenol |
|
(33) |
2,5 |
expressed as 1,3-benzenedimethanamine (hydrolysis product) |
|
(34) |
2,5 |
expressed as crotonic acid |
|
(35) |
30 |
expressed as the sum of phthalic acid, dibutyl ester (DBP), diisobutyl phthalate (DIBP), phthalic acid, benzyl butyl ester (BBP) and phthalic acid, bis(2-ethylhexyl) ester (DEHP) expressed as DEHP equivalents using the following equation: 5×DBP + 4×DIBP + 0.1×BBP + 1×DEHP |
|
(36) |
2,5 |
expressed as the sum of triethanolamine and the hydrochloride adduct expressed as triethanolamine |
|
(37) |
0,1 |
expressed as perchlorate |
|
(38) |
0,05 |
expressed as PFAS Total |
|
(39) |
0,01 |
expressed as Sum of PFAS |
|
(40) |
150 |
expressed as the sum of (di)ethyleneglycol, monoalkyl (C1,C2,C4,C6) ethers and acetic acid, 2-ethoxyethyl ester |
|
(41) |
1 500 |
expressed as the sum of sodium salts of alkyl(C8-C18)benzene sulfonates, alkyl(C8-C18)naphthalene sulfonates, alkyl(C8-C18)sulfates and alkyl(C8-C18)sulfonates |
|
(42) |
50 |
expressed as the sum of thiurams and dithiocarbamates |
|
(43) |
100 |
expressed as the sum of benzothiazole-2-thiol (CAS Number 149-30-4, EUPL Number 0910), di(benzothiazole-2-yl) disulphide (CAS Number 120-78-5, EUPL Number 0890), 2-(morpholinothio)benzothiazole (CAS Number 102-77-2), N-tert-butylbenzothiazole-2-sulphenamide (CAS Number 95-31-8, EUPL Number 0854), N-cyclohexylbenzothiazole-2-sulfenamide (CAS Number 95-33-0, EUPL Number 0847), 2-(2,6-dimethylmorpholinothio) benzthiazole (CAS Number 102-78-3) and 2-benzothiazyl-N,N-diethylthiocarbamyl sulphide (CAS Number 95-30-7) |
|
(44) |
0,1 |
expressed as the sum of ethylvinylbenzene and divinylbenzene |
|
(45) |
0,6 |
expressed as the sum of 1,4- and 1,5-hexadiene |
|
(46) |
2,5 |
expressed as neodecanoic acid |
|
(47) |
50 |
expressed as the sum of xanthogenates |
|
(48) |
10 2,5 |
expressed as the sum of TMBPF, TMBPF-DGE, TMBPF-DGE·H2O and TMBPF-DGE·2H2O expressed as the sum of TMBPF-DGE·HCl, TMBPF-DGE·2HCl and TMBPF-DGE·HCl·H2O |
|
49 |
6 |
expressed as 3-monochlor–1,2 -propane-diol |
Where entries in Table 1 which contain alkylphenol structural moieties are used as stabilisers they may be accompanied by the non-intentionally added substances shown in Table 4 and the MTCtap, organics values shown in the table shall apply to those substances.
Table 4
MTCtap, organics for degradation products of stabilisers with alkylphenol structural moieties that are listed in the European positive list for organic materials
|
EC Number |
CAS Number |
Substance name |
Maximum Tolerable Concentration at the tap (MTCtap, organics) in μg/l |
|
204-598-6 |
123-07-9 |
4-ethylphenol |
0,1 |
|
202-679-0 |
98-54-4 |
4-tert-butylphenol |
2,5 |
|
211-946-0 |
719-22-2 |
2,6-di-tert-butyl-1,4-benzoquinone |
2,5 |
|
202-532-0 |
96-76-4 |
2,4-di-tert-butyl phenol |
250 |
|
- |
19263-36-6 |
3,5-di-tert-butyl-4-hydroxy styrene |
0,1 |
|
216-592-0 |
1620-98-0 |
3,5-di-tert-butyl-4-hydroxy benzaldehyde |
2,5 |
|
622-532-8 |
14035-33-7 |
3',5'-bis(tert-butyl)-4'-hydroxyacetophenone |
2,5 |
|
872-478-6 |
82304-66-3 |
7,9-di-tert-butyl-1-oxaspiro[4.5]deca–6,9 -diene–2,8 -dione |
100 |
|
228-985-4 243-556-1 |
6386-38-5 20170-32-5 |
methyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionic acid |
50 as sum |
ANNEX II
EUROPEAN POSITIVE LIST OF COMPOSITIONS OF METALLIC MATERIALS AND GROUPS OF COMPOSITIONS FOR METALLIC MATERIALS
Table 1
European positive list of individual metallic compositions for metallic materials
|
EUPL Number |
Metallic composition category (A) |
Accepted metallic composition notation(s) |
Accepted metallic composition constituents |
Accepted metallic composition impurities |
Relevant product groups |
Conditions of use |
Expiry date |
|||||||||||
|
Identity |
Minimum concentration (% w/w) |
Maximum concentration (% w/w) |
Identity |
Maximum concentration (% w/w) |
||||||||||||||
|
1644 |
Copper-Zinc alloys |
CW501L-DW (CuZn10) |
Cu Zn |
89,0 Remainder |
91,0 |
Fe Ni Pb Sn Each other impurity |
0,05 0,2 0,05 0,1 < 0,02 |
C - D |
Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. |
31 December 2034 |
||||||||
|
1645 |
Copper-Zinc alloys |
CW506L-DW (CuZn33) |
Cu Zn |
66,0 Remainder |
68,0 |
Fe Ni Pb Sn Each other impurity |
0,05 0,2 0,05 0,1 < 0,02 |
B - D |
Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. |
31 December 2034 |
||||||||
|
1646 |
Copper-Zinc alloys |
CW507L-DW (CuZn36) |
Cu Zn |
63,5 Remainder |
65,5 |
Fe Ni Pb Sn Each other impurity |
0,05 0,2 0,1 0,1 < 0,02 |
B - D |
Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. |
31 December 2034 |
||||||||
|
1647 |
Copper-Zinc alloys |
CW508L-DW (CuZn37) |
Cu Zn |
62,0 Remainder |
64,0 |
Al Fe Ni Pb Sn Each other impurity |
0,05 0,1 0,2 0,1 0,1 < 0,02 |
B - D |
Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. |
31 December 2034 |
||||||||
|
1648 |
Copper-Zinc alloys |
CW509L-DW (CuZn40) |
Cu Zn |
59,5 Remainder |
61,5 |
Al Fe Ni Pb Sn Each other impurity |
0,05 0,2 0,2 0,2 0,2 < 0,02 |
B - D |
Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %; Pb: ≤ 0,2 %. |
31 December 2034 |
||||||||
|
1649 |
Copper-Zinc alloys |
CW510L-DW (CuZn42) |
Cu Zn |
57,0 Remainder |
59,0 |
Al Fe Ni Pb Sn Each other impurity |
0,05 0,3 0,2 0,2 0,3 < 0,02 |
B - D |
Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. |
31 December 2034 |
||||||||
|
1650 |
Copper-Zinc-Aluminium alloys |
CuZn42Al (CC773S) |
Cu |
57,0 |
59,0 |
Fe |
0,3 |
B - D |
|
31 December 2034 |
||||||||
|
Zn |
Remainder |
|
Pb |
0,2 |
||||||||||||||
|
Al |
0,1 |
0,3 |
Sn Each other impurity |
0,3 < 0,02 |
||||||||||||||
|
1651 |
Copper-Zinc-Aluminium-Tin alloys |
CuZn35Al1.5Sn |
Cu |
64,0 |
66,0 |
Fe |
0,10 |
B - D |
|
31 December 2034 |
||||||||
|
Zn |
Remainder |
|
Mn |
0,10 |
||||||||||||||
|
Al Sn |
1,40 0,50 |
1,60 0,70 |
Ni Pb Si Each other impurity |
0,10 0,2 0,2 < 0,02 |
||||||||||||||
|
1652 |
Copper-Zinc-Aluminium-Silicon-Iron alloys |
CuZn35AlSiFe |
Cu |
62,5 |
64,5 |
Ni |
0,09 |
B - D |
|
31 December 2034 |
||||||||
|
Zn |
Remainder |
|
Pb |
0,15 |
||||||||||||||
|
Al Si Fe |
0,5 0,5 0,04 |
0,85 0,8 0,1 |
Sn Each other impurity |
0,1 < 0,02 |
||||||||||||||
|
1653 |
Copper-Zinc-Arsenic alloys |
CW707R (CuZn30As) |
Cu |
69,0 |
71,0 |
Fe |
0,05 |
B - D |
|
31 December 2034 |
||||||||
|
Zn |
Remainder |
|
Mn |
0,1 |
||||||||||||||
|
As |
0,02 |
0,06 |
Pb Sn Each other impurity |
0,07 0,05 < 0,02 |
||||||||||||||
|
1654 |
Copper-Zinc-Arsenic-Aluminium alloys |
CuZn35Al-C |
Cu |
63,0 |
64,5 |
Fe |
0,3 |
B - D |
|
31 December 2034 |
||||||||
|
Zn |
Remainder |
|
Mn |
0,1 |
||||||||||||||
|
As Al |
0,04 0,2 |
0,14 0,7 |
Pb Sn Each other impurity |
0,2 0,3 < 0,02 |
||||||||||||||
|
1655 |
Copper-Zinc-Arsenic-Aluminium alloys |
CW702R (CuZn20Al2As) |
Cu |
76,0 |
79,0 |
Pb |
0,05 |
A - B |
|
31 December 2034 |
||||||||
|
Zn |
Remainder |
|
Ni |
0,1 |
||||||||||||||
|
Al As |
1,8 0,02 |
2,3 0,06 |
Sb Each other impurity |
0,02 < 0,02 |
||||||||||||||
|
1656 |
Copper-Zinc-Arsenic-Antimony-Aluminium alloys |
CC771S (CuZn36AlAsSb-C) |
Cu |
62,0 |
65,0 |
Fe |
0,2 |
B - D |
Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. |
31 December 2034 |
||||||||
|
Zn |
Remainder |
|
Mn |
0,1 |
||||||||||||||
|
As Sb Αl |
0,02 0,02 0,45 |
0,04 0,05 0,7 |
Ni Pb Sn Each other impurity |
0,20 0,2 0,3 < 0,02 |
||||||||||||||
|
1657 |
Copper-Tin-Zinc-Phosphorus-Sulfur alloys |
CuSn4Zn2PS |
Cu Sn Zn P S |
90,0 3,0 1,0 0,01 0,2 |
96,0 5,0 3,0 0,1 0,6 |
Fe Ni Pb Sb Each other impurity |
0,3 0,3 0,2 0,1 < 0,02 |
B - D |
|
31 December 2034 |
||||||||
|
1658 |
Copper-Zinc-Silicon-Phosphorus alloys |
CW724R (CuZn21Si3P) |
Cu |
75,0 |
77,0 |
Al |
0,05 |
B - D |
|
31 December 2034 |
||||||||
|
Zn |
Remainder |
|
Fe |
0,3 |
||||||||||||||
|
Si P |
2,7 0,02 |
3,5 0,10 |
Mn Ni Pb Sn Each other impurity |
0,05 0,2 0,1 0,3 < 0,02 |
||||||||||||||
|
1659 |
Copper-Zinc-Silicon-Phosphorus alloys |
CC768S (CuZn21Si3P-C) |
Cu |
75,0 |
77,0 |
Al |
0,05 |
B - D |
B and Zr are used for grain refinement of this alloy. In the final material the content of these two elements shall be < 0,02 %. |
31 December 2034 |
||||||||
|
Zn |
Remainder |
|
Fe |
0,3 |
||||||||||||||
|
Si P |
2,7 0,02 |
3,5 0,10 |
Mn Ni Pb Sn Each other impurity |
0,05 0,2 0,1 0,3 < 0,02 |
||||||||||||||
|
1660 |
Copper-Silicon-Zinc-Manganese-Phosphorus alloys |
CC245E (CuSi4Zn4MnP-C) |
Cu |
Remainder |
|
Al |
0,3 |
B - D |
|
31 December 2034 |
||||||||
|
Si Zn Mn P |
2,5 1,0 0,03 0,05 |
4,5 7,0 0,09 0,15 |
Fe Ni Pb Sn Each other impurity |
0,3 0,10 0,10 0,3 < 0,02 |
||||||||||||||
|
1661 |
Copper-Silicon-Zinc-Manganese-Phosphorus alloys |
CC246E (CuSi4Zn9MnP-C) |
Cu |
Remainder |
|
Al |
0,3 |
B - D |
|
31 December 2034 |
||||||||
|
Si Zn Mn P |
2,5 7,0 0,03 0,05 |
4,5 11,0 0,09 0,15 |
Fe Ni Pb Sn Each other impurity |
0,3 0,10 0,10 0,3 < 0,02 |
||||||||||||||
|
1662 |
Copper-Silicon-Zinc-Manganese-Phosphorus alloys |
CuSi4Zn4MnP |
Cu |
Remainder |
|
Al |
0,3 |
B - D |
|
31 December 2034 |
||||||||
|
Si Zn Mn P |
2,5 1,0 0,01 0,05 |
4,5 7,0 0,09 0,15 |
Fe Ni Pb Sn Each other impurity |
0,3 0,10 0,10 0,3 < 0,02 |
||||||||||||||
|
1663 |
Copper-Silicon-Zinc-Manganese-Phosphorus alloys |
CuSi4Zn9MnP |
Cu |
Remainder |
|
Al |
0,3 |
B - D |
|
31 December 2034 |
||||||||
|
Si Zn Mn P |
2,5 7,0 0,01 0,05 |
4,5 11,0 0,09 0,15 |
Fe Ni Pb Sn Each other impurity |
0,3 0,10 0,10 0,3 < 0,02 |
||||||||||||||
|
1664 |
Copper-Tin-Phosphorus alloys |
CW453K (CuSn8) |
Cu |
Remainder |
|
Fe |
0,1 |
C - D |
|
31 December 2034 |
||||||||
|
Sn P |
7,5 0,02 |
8,5 0,4 |
Ni Zn Each other impurity |
0,2 0,2 < 0,02 |
||||||||||||||
|
1665 |
Copper-Tin-Lead-Phosphorus alloys |
CuSn10-C |
Cu Sn Pb P |
88,0 9,0 0,2 0,01 |
90,0 11,0 1,0 0,2 |
Fe Mn Ni S Sb Zn Each other impurity |
0,2 0,10 0,2 0,05 0,1 0,5 < 0,02 |
B - D |
Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %; Sb: ≤ 0,1 %; Pb: 0.2 % - 1.0 %; P: 0.01 % - 0.2 %. |
31 December 2034 |
||||||||
|
1666 |
Copper-Nickel-Manganese-Iron alloys |
CW352 (CuNi10FeMn) |
Cu |
Remainder |
|
Each impurity |
< 0,02 |
B - D |
For use exclusively for fittings and ancillaries for heat exchangers and desalination equipment. |
31 December 2031 |
||||||||
|
Ni Mn Fe |
9,0 0,5 1,0 |
11,0 1,0 2,0 |
||||||||||||||||
|
1667 |
Copper-Nickel-Manganese-Iron alloys |
CW352H (CuNi10Fe1Mn) CW353H (CuNi30Fe2Mn2) CW354H (CuNi30Mn1Fe) |
Cu |
Remainder |
|
Each impurity |
< 0,02 |
B |
For use exclusively for fittings and ancillaries in desalination plants. |
31 December 2031 |
||||||||
|
Ni Fe Mn |
9,0 1,0 0,5 |
32,0 2,5 2,5 |
||||||||||||||||
|
1668 |
Coppers |
CW024A (Cu-DHP) |
Cu |
99,9 |
|
Each impurity |
< 0,02 |
A - D |
Copper pipes cannot be used with all drinking waters distributed within the EU. Some water compositions (e.g., test water 1 according to EN 15664-1) cause a very high copper release. Member States may restrict the use of copper pipes with certain drinking waters. |
31 December 2034 |
||||||||
|
P |
0,015 |
0,040 |
||||||||||||||||
|
1669 |
Coppers |
CW004A (Cu-ETP) |
Cu |
99,90 |
|
Each impurity |
< 0,02 |
C - D |
|
31 December 2034 |
||||||||
|
O |
|
0,040 |
||||||||||||||||
|
1670 |
Coppers |
CW008A (Cu-OF) |
Cu |
99,95 |
|
Each impurity |
< 0,02 |
B - D |
|
31 December 2034 |
||||||||
|
1671 |
Coppers |
CW020A (Cu-PHC) |
Cu |
99,95 |
|
Each impurity |
< 0,02 |
B - D |
|
31 December 2034 |
||||||||
|
P |
0,001 |
0,006 |
||||||||||||||||
|
1672 |
Coppers |
CW021A (Cu-HCP) |
Cu |
99,95 |
|
Each impurity |
< 0,02 |
B - D |
|
31 December 2034 |
||||||||
|
P |
0,002 |
0,007 |
||||||||||||||||
|
1673 |
Coppers |
CW023A (Cu-DLP) |
Cu |
99,90 |
|
Each impurity |
< 0,02 |
B - D |
|
31 December 2034 |
||||||||
|
P |
0,005 |
0,013 |
||||||||||||||||
|
1674 |
Tinned copper pipes and tinned copper fittings |
CW024A (Cu-DHP) with a tin layer of 1 μm thickness |
Sn |
90 |
|
Impurities of the tin layer |
|
A - D |
|
31 December 2034 |
||||||||
|
Cu |
|
10 |
||||||||||||||||
|
|
|
|
As Bi Cd Cr Ni Pb Sb Each other impurity |
0,01 0,01 0,01 0,01 0,01 0,01 0,01 < 0,02 |
||||||||||||||
|
1675 |
Aluminium |
Aluminium |
Al |
99,0 |
|
Fe+Si Cu Others (e.g., Cr, Mg, Mn, Ni, Zn) Each other impurity |
1,0 0,10 if Cr and/or Mn ≥ 0,05 %; 0,20 if Cr and/or Mn < 0,05 % 0,1 each < 0,02 |
B - C |
For use in access ladders and other minor components, and not for long-term contact, as follows:
|
31 December 2031 |
||||||||
|
1676 |
Steel/Iron |
Galvanised steel |
Zn coating |
|
|
Impurities of the zinc coating |
|
A - D |
Acceptance is based on results that have been obtained with galvanised steel pipes with lead concentrations between 1,0 % and 0,6 % in the zinc layer, assuming a similar behaviour of pipes with lower lead concentrations. Galvanised steel pipes cannot be used with all drinking waters distributed within the EU. Member States may restrict the use of galvanised steel pipes with certain drinking waters which may cause unacceptable levels of corrosion. |
31 December 2034 |
||||||||
|
As Bi Cd Cr Pb Sb Each other impurity |
0,02 0,01 0,01 0,02 0,05 0,01 < 0,02 |
|||||||||||||||||
|
1677 |
Steel/Iron |
Carbon steel according to EN 10025 / EN 10213 / EN 10222 |
Fe |
|
|
Al |
0,05 |
Carbon steel with protective layer/coating: A - D. Unprotected carbon steel: C2 - D |
Carbon Steel for pipes and tanks: carbon steel without permanent protective layers (e.g., cementitious mortar linings or organic coatings (e.g. epoxy resins)) is not suitable for use in contact with drinking water. Carbon Steel for ancillaries: unprotected carbon steel can be used for specific applications (e.g. pumps, valves) and only for small surface in contact with drinking water. |
31 December 2034 |
||||||||
|
C Cr Mo Mn Ni |
0,02 0,02 0,02 0,02 0,02 |
0,25 0,30 0,12 1,65 0,50 |
Cu Nb P S Si Ti V Each other impurity |
0,55 0,05 0,03 0,03 0,6 0,05 0,12 < 0,02 |
||||||||||||||
|
1678 |
Steel/Iron |
Cast iron according to EN 1561 / EN 1563 |
Fe |
|
|
As |
0,05 |
C2 |
Cast iron for pipes and tanks: cast iron without permanent protective layers is not suitable for pipes and fittings in contact with drinking water. Cast iron for ancillaries: unprotected cast iron can be used for specific applications (e.g. pumps, valves) and only for very small surface in contact with drinking water. |
31 December 2034 |
||||||||
|
C Cu Cr Mo Mn Ni Si |
0,02 0,02 0,02 0,02 0,02 0,02 1.5 |
4,0 1,0 1,0 1,0 1,0 1,0 3,5 |
Mg P S Sn V Each other impurity |
0,1 0,15 0,1 0,1 0,1 < 0,02 |
||||||||||||||
|
1679 |
Steel/Iron |
Stainless steels according to EN 10088 and EN 10283 |
|
|
|
|
|
A - D |
|
31 December 2034 |
||||||||
|
1680 |
Platings |
Electroplating of the outer surface (tin plating applied by a galvanic process) |
Cu Sn |
|
|
|
|
B- D (by reference to Cu alloys listed elsewhere in the metallic materials EUPL) |
Restrictions:
|
31 December 2031 |
||||||||
|
1681 |
Platings |
Tin/Nickel platings applied by a galvanic process on the external surface |
Sn Ni |
65 33 |
67 35 |
|
|
B- D (by reference to Cu alloys listed elsewhere in the metallic materials EUPL) |
Restrictions:
|
31 December 2031 |
||||||||
|
1682 |
Platings |
Electrolytic Nickel/Chromium platings |
NI Cr |
|
|
|
|
B |
|
31 December 2031 |
||||||||
|
1683 |
Passive compositions |
NiCr7030 |
Ni |
60,0 |
|
Al |
0,30 |
B - D |
|
31 December 2034 |
||||||||
|
Cr Si |
29,0 0,50 |
32,0 2,0 |
C Co Cu Fe Mn P S Each other impurity |
0,10 1,5 0,50 5,0 1,00 0,020 0,015 < 0,02 |
||||||||||||||
|
1684 |
Passive compositions |
Ni55Ti45 |
Ni Ti |
54,0 Remainder |
56,0 |
Each impurity |
< 0,02 |
C - D |
|
31 December 2034 |
||||||||
|
1685 |
Passive compositions |
Ti1 according to ISO 23515:2022 |
Ti |
Remainder |
|
C O N H Fe Each other impurity Other impurities in total |
0,08 0,18 0,03 0,015 0,20 < 0,1 < 0,4 |
B - D |
|
31 December 2034 |
||||||||
|
1686 |
Passive compositions |
Ti2 according to ISO 23515:2022 |
Ti |
Remainder |
|
C O N H Fe Each other impurity Other impurities in total |
0,08 0,25 0,03 0,015 0,30 < 0,1 < 0,4 |
B - D |
|
31 December 2034 |
||||||||
|
1687 |
Passive compositions |
Ti3 according to ISO 23515:2022 |
Ti |
Remainder |
|
C O N H Fe Each other impurity Other impurities in total |
0,08 0,35 0,05 0,015 0,30 < 0,1 < 0,4 |
B - D |
|
31 December 2034 |
||||||||
|
1688 |
Passive compositions |
Ti4 according to ISO 23515:2022 |
Ti |
Remainder |
|
C O N H Fe Each other impurity Other impurities in total |
0,08 0,40 0,05 0,015 0,50 < 0,1 < 0,4 |
B - D |
|
31 December 2034 |
||||||||
|
1689 |
Passive compositions |
Ti-6Al-4V according to ISO 23515:2022 |
Ti |
Remainder |
|
C |
0,08 |
B - D |
|
31 December 2034 |
||||||||
|
Al V |
5,5 3,5 |
6,75 4,5 |
O N H Fe Each other impurity Other impurities in total |
0,20 0,05 0,015 0,4 < 0,1 < 0,4 |
||||||||||||||
|
1690 |
Passive compositions |
Ti3.5Al3.0V0.4Mo0.9Ni0.25Pd0.14Ru0.2Fe |
Ti |
Remainder |
|
Total impurities |
< 0,08 |
B - D |
|
31 December 2031 |
||||||||
|
Al V Mo Ni Pd Ru Fe |
|
3,5 3 0,4 0,9 0,25 0,14 0,2 |
||||||||||||||||
Table 2
European positive list of groups of metallic compositions for metallic materials
|
EUPL Number |
Metallic composition category (A) |
Accepted metallic composition notation(s) |
Accepted metallic composition constituents |
Accepted metallic composition impurities |
Relevant product groups |
Conditions of use |
Expiry date |
|||
|
Identity |
Minimum concentration (% w/w) |
Maximum concentration (% w/w) |
Identity |
Maximum concentration (% w/w) |
||||||
|
1691 |
Copper alloys not elsewhere categorised |
Other copper alloys for Product Group D |
Cu Zn Si P Al Fe Mn Pb Ni As Sb |
|
No restriction No restriction No restriction No restriction 3,0 3,0 3,0 1,8 3,0 0,25 0,25 |
Each other element |
0,1 |
D |
|
31 December 2031 |
|
1692 |
Passive compositions |
Other passive metallic materials for Product Group D |
|
|
|
|
|
D |
|
31 December 2031 |
|
1693 |
Hard brazing alloys and soft soldering alloys |
Hard brazing and soft soldering alloys meeting the maximum concentrations of the specified impurities |
|
|
|
Pb Sb Cd |
0,1 0,1 0,01 |
B - C taking on account the extension of the final surface that might be exposed to drinking water |
For capillary brazing/soldering of pipes and fittings. The application of these alloys is critical to how they will behave during use and certain combinations of brazing/soft soldering alloy and parent metals may result in significant release of certain metals into the drinking water. |
31 December 2031 |
Notes:
1. Note 1: Explanation of the notes in Tables 1 and 2
The meaning of the note provided in Tables 1 and 2 is as follows:
|
2. Note 2: MTCtap, metallics
The MTCtap, metallics, used to assess the safety of the use of the compositions listed under Tables 1 and 2 are provided for information purposes under Annex V.
ANNEX III
EUROPEAN POSITIVE LIST OF ORGANIC CONSTITUENTS OF CEMENTITIOUS MATERIALS
Table 1 sets out (1) the different categories of generic constituents of cementitious materials that may be used in the preparation of cementitious mixtures and (2) establishes conditions of use for each category.
Table 1
List of generic constituents of cementitious materials
|
Generic constituent category |
Types of specific organic cementitious constituents within the scope of the European positive lists |
European positive list requirements |
Condition of use |
|
Cement |
Organic grinding aids or other organic substances used for the preparation of cement |
European positive list for cementitious materials |
|
|
Inorganic additions |
Organic grinding aids or other organic substances used for the preparation of inorganic additions |
European positive list for cementitious materials |
|
|
Aggregates |
Not relevant |
Not relevant |
|
|
Mixing water |
Not relevant |
Not relevant |
|
|
Organic additions |
Organic substances |
European positive list for organic materials European positive list for cementitious materials |
Starting substances that are authorised in the European positive list for organic materials which are authorised for use in the manufacture of coatings may be used to manufacture organic additions for use in cementitious materials |
|
Admixtures |
Organic substances |
European positive list for cementitious materials |
|
|
Fibres |
Organic substances |
European positive list for organic materials |
Starting substances that are authorised in the European positive list for organic materials may be used to manufacture polymer fibres for use in cementitious materials |
|
Formwork release agents |
Organic substances |
European positive list for cementitious materials |
|
|
Curing compounds |
Organic substances |
European positive list for cementitious materials |
|
Table 2
Positive list of individual organic constituents for cementitious materials
|
EUPL Number |
EC Number |
CAS Number |
Organic cementitious constituent name |
Generic constituent category |
Technical function |
Maximum Tolerable Concentration at the tap (MTCtap, cementitious) in μg/l |
Total Maximum Tolerable Concentration at the tap (MTC(T)tap, cementitious) in μg/l (A) |
Conditions of use |
Expiry date |
|
|
Value for the organic cementitious constituent |
Values for other relevant chemical species (B) |
|||||||||
|
1694 |
|
514-10-3 |
abietic acid |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1695 |
|
64-19-7 |
acetic acid |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1696 |
|
108-24-7 |
acetic anhydride |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1697 |
|
6419-19-8 |
aminotris(methylphosphonic acid) (ATMP) |
Admixtures |
|
0,1 - expressed as amines |
|
|
|
31 December 2031 |
|
1698 |
|
1002-89-7 |
ammonium stearate |
Admixtures |
|
|
|
For ammonium, refer to Annex V. |
|
31 December 2028 |
|
1699 |
|
577-11-7 |
anionic, docusate sodium |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1700 |
|
85536-14-7 |
benzenesulfonic acid 4-C10-C13-sec-alk derivs |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1701 |
|
2634-33-5 |
1,2-benzoisothiazol-3(2H)-one (BIT) |
Admixtures, organic additions, formwork release agents |
Biocide |
25 |
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
|
1702 |
|
14548-60-8 |
benzylalcoholhemiformal |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1703 |
|
120-32-1 |
2-benzyl-4-chloro phenol (Chlorophen) |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
|
1704 |
|
90-43-7 |
biphenyl-2-ol (2-phenylphenol) |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1705 |
|
52-51-7 |
2-brom-2-nitropropan–1,3 -diol (Bronopol) |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1706 |
|
123-95-5 |
butyl stearate |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1707 |
|
544-17-2 |
calcium formate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1708 |
|
8061-52-7 |
calcium lignosulfonate |
Admixtures |
|
12 |
|
|
|
31 December 2028 |
|
1709 |
|
1592-23-0 |
calcium stearate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1710 |
|
52627-73-3 |
capric acid (decanoic acid) |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1711 |
|
124-07-2 |
caprylic acid (octanoic acid) |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1712 |
|
9000-11-7 |
carboxy methyl cellulose |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1713 |
|
9004-32-4 |
carboxy methyl cellulose, sodium salt |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1714 |
|
9004-34-6 |
cellulose |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1715 |
|
59-50-7 |
chlorocresol |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1716 |
911-418-6 |
55965-55-9 |
Reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (CIT/MIT) |
Admixtures, organic additions, formwork release agents |
Biocide |
25 |
|
|
Mixture 5-chloro-2-methyl-2H-isothiazol-3-one (75%) and 2-methyl-4-isothiazolin-3-one (25%). Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1717 |
|
77-92-9 |
citric acid (anhydrous) |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1718 |
|
5949-29-1 |
citric acid, monohydrate |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1719 |
|
61791-31-9 |
coconut diethanolamide (cocamide DEA) |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1720 |
|
10016-20-3 |
cyclohexapentylose (α-dextrin) |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1721 |
|
7585-39-9 |
β-dextrin |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1722 |
|
14431-43-7 |
dextrin / maltodextrin |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1723 |
|
50-70-4 |
D-glucitol (sorbitol) |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1724 |
|
10222-01-2 |
2,2-dibromo-3-nitrilopropionamide (DBNPA) |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
|
1725 |
|
17603-42-8 |
2,3-dihydroxypropyl (dihydrogen phosphate), sodium salt |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1726 |
|
39354-45-5 |
disodium dodecylethoxylate sulfosuccinate |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1727 |
|
1643-20-5 |
dodecyldimethylamine oxide |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1728 |
|
61791-26-2 |
ethoxylated tallow amine |
Admixtures |
|
0,1 - expressed as amines |
|
|
|
31 December 2028 |
|
1729 |
|
9004-57-3 |
cellulose, ethyl ether |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1730 |
|
3586-55-8 |
(ethylenedioxy)-dimethanol |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1731 |
|
61790-12-3 |
fatty acids, tall oils |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1732 |
|
50-00-0 |
formaldehyde |
Admixtures, organic additions, formwork release agents |
Biocide |
750 |
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
|
1733 |
|
64-18-6 |
formic acid |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1734 |
|
4719-04-4 |
hexahydro-1 3,5-tris(hydroxyethyl)-s-triazine (N-formal) |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1735 |
|
9004-62-0 |
cellulose, 2-hydroxyethyl ether |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1736 |
|
9032-42-2 |
cellulose, 2-hydroxyethyl methyl ether |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1737 |
|
37353-59-6 |
hydroxy methyl cellulose |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1738 |
|
22987-21-9 |
hydroxyethyldiphosphonic acid |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1739 |
|
8061-54-9 |
magnesium lignosulfonate |
Admixtures |
|
12 |
|
|
|
31 December 2028 |
|
1740 |
|
68891-01-0 |
melamine formaldehyde, toluenesulfonamide polymer |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1741 |
|
37206-01-2 |
methyl carboxy methyl cellulose |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1742 |
|
9004-67-5 |
methyl cellulose |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1743 |
|
9004-59-5 |
methyl ethyl cellulose |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1744 |
|
9004-65-3 |
cellulose, 2-hydroxypropyl methyl ether (HPMC) |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1745 |
|
2682-20-4 |
2-methyl-4-isothiazolin-3-one (MIT) |
Admixtures, organic additions, formwork release agents |
Biocide |
25 |
|
|
Only to be used in aqueous polymer dispersions and emulsions. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
|
1746 |
|
37293-74-6 |
naphthalenesulfonic acid, polymer with formaldehyde, calcium salt |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1747 |
|
36290-04-7 |
2-naphthalenesulfonic acid, polymer with formaldehyde, sodium salt |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1748 |
|
26530-20-1 |
2-n-octyl-4-isothiazolin-3-one (OIT) |
Admixtures, organic additions, formwork release agents |
Biocide |
25 |
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, I of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1749 |
|
112-80-1 |
oleic acid |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1750 |
|
132-27-4 |
o-phenyl-phenate (OPP) |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1751 |
|
111-30-8 |
1,5-pentandial (glutaraldehyde) |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1752 |
|
37971-36-1 |
2-phosphono-butane 1,2,4-tricarboxylic acid |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1753 |
|
97105-14-1 |
polycarboxylic acid salt type surfactant |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1754 |
|
68412-53-3 |
polyethylene glycol branched nonylphenyl ether phosphate |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1755 |
|
37205-87-1 |
polyethylene glycol nonylphenyl ether |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1756 |
|
72283-35-3 |
polyoxyalkylene alkylether fatty acid |
Admixtures |
|
1500 |
|
|
|
31 December 2034 |
|
1757 |
|
73667-50-2 |
polysaccharide, succinoglycan |
Admixtures |
|
|
|
|
Exopolysaccharide, derived from fermentation of agrobacterium tumefaciens. |
31 December 2037 |
|
1758 |
|
96949-22-3 |
polysaccharide, Welan gum |
Admixtures |
|
|
|
|
Exopolysaccharide, derived from fermentation of alcaligenes. |
31 December 2034 |
|
1759 |
|
143-18-0 |
potassium oleate |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1760 |
|
6381-59-5 304-59-6 |
potassium sodium tartrate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1761 |
|
3811-73-2 |
pyridine-2-thiol 1-oxide, sodium salt |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1762 |
|
127-09-3 |
sodium acetate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1763 |
|
15733-22-9 |
sodium p-chloro-m-cresolate |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1764 |
|
13150-00-0 |
sodium 2-,2-,2-dodecyloxy ethoxy ethyl sulfate |
Admixtures |
|
1500 |
|
|
|
31 December 2028 |
|
1765 |
|
141-53-7 |
sodium formate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1766 |
|
31138-65-5 |
sodium glucoheptonate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1767 |
|
527-07-1 |
sodium gluconate |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1768 |
|
137-16-6 |
sodium N-lauroylsarcosinate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1769 |
|
151-21-3 |
sodium n-dodecyl sulfate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1770 |
|
8061-51-6 |
sodium lignosulfonate |
Admixtures |
|
12 |
|
|
|
31 December 2028 |
|
1771 |
|
9084-06-4 |
sodium naphthalene sulfonic acid |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1772 |
|
61790-51-0 |
sodium resinate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1773 |
|
9005-25-8 |
starch, edible |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1774 |
|
9049-76-7 |
starch hydroxypropyl ether |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1775 |
|
57-11-4 |
stearic acid |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1776 |
|
57-50-1 |
sucrose |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1777 |
|
68131-32-8 |
sulfite liquors (calcium lignosulfonate) |
Admixtures |
|
12 |
|
|
|
31 December 2028 |
|
1778 |
|
85586-07-8 |
sulfuric acid, mono-C12-C14-alkyl esters, sodium salts |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
|
1779 |
|
64787-97-9 |
sulfurous acid, monosodium salt, polymer with formaldehyde and 1,3,5-triazine-2,4,6-triamine |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1780 |
|
8029-43-4 |
syrups, hydrolysed starch |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1781 |
|
68131-37-3 |
syrups, hydrolysed starch, dehydrated |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1782 |
|
68425-17-2 |
syrups, hydrolysed starch, hydrogenated |
Admixtures |
|
|
|
|
Sorbitol (2-5 %), maltitol (9-14 %) and maltotritol (11-16 %). This mixture also contains 67-76 % hydrogenated oligosaccharides in compliance with the purity criteria for maltitol syrup E965(ii) as laid down in Commission Regulation (EU) No 231/2012. |
31 December 2034 |
|
1783 |
|
65997-01-5 |
tall oil, sodium salt |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1784 |
|
67701-06-8 |
tallow oleine |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1785 |
|
533-74-4 |
tetrahydro–3,5 -dimethyl-1,3,5-thiadiazine-2-thione |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
|
1786 |
|
9014-85-1 |
2,4,7,9-tetramethyl-5-decyne–4,7 -diol, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1787 |
|
126-71-6 |
triisobutyl phosphate |
Organic additions |
|
|
|
|
|
31 December 2031 |
|
1788 |
|
102-71-6 |
triethanolamine (2,2,2-nitrilotriethanol) |
Admixtures, grinding aids |
|
2,5 - expressed as the sum of triethanolamine and the hydrochloride adduct expressed as triethanolamine |
|
|
|
31 December 2034 |
|
1789 |
|
2943-75-1 |
triethoxyoctylsilane |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1790 |
|
9014-63-5 |
xylan (rosin wood) |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1791 |
|
107-21-1 |
ethane–1,2 -diol |
|
|
|
|
1500 - expressed as ethyleneglycol. |
|
31 December 2034 |
|
1792 |
|
11138-66-2 |
xanthan gum |
Admixtures |
|
|
|
|
Maximum dosage = 0,15 % (w/w) in concrete. |
31 December 2028 |
|
1793 |
|
111-42-2 |
2,2'-iminodiethanol |
Admixtures |
|
|
|
|
Maximum dosage = 0,004 % (w/w) in concrete. |
31 December 2031 |
|
1794 |
|
111-46-6 |
diethylene glycol |
|
|
|
|
1500 - expressed as ethyleneglycol |
|
31 December 2034 |
|
1795 |
|
122-20-3 |
triisopropanolamine (1,1',1''-nitrilopropane-2-ol) (TIPAL) |
|
|
250 |
|
|
|
31 December 2034 |
|
1796 |
|
141-43-5 |
2-aminoethanol |
|
|
2,5 |
|
|
Maximum dosage = 0,004 % (w/w) in concrete. |
31 December 2034 |
|
1797 |
|
15214-89-8 |
2-acrylamido-2-methylpropanesulfonic acid |
|
|
2,5 |
|
|
|
31 December 2034 |
|
1798 |
|
25322-69-4 |
polypropylene glycol |
|
|
|
|
|
|
31 December 2034 |
|
1799 |
|
55965-84-9 |
Reaction mass of 5-chloro-2-methyl–1,2 -thiazol-3(2H)-one and 2-methyl-1,2-thiazol-3(2H)-one (3:1) (CIT/MIT) |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2034 |
|
1800 |
|
56-81-5 |
glycerol |
|
|
|
|
|
|
31 December 2034 |
|
1801 |
|
57-13-6 |
urea |
|
|
|
|
|
|
31 December 2034 |
|
1802 |
|
87-69-4 |
tartaric acid |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1803 |
|
9002-89-5 |
polyvinyl alcohol |
Organic additions |
|
|
|
|
|
31 December 2037 |
|
1804 |
|
108-78-1 |
2,4,6-triamine-1,3,5-triazine |
|
|
125 |
|
|
Maximum dosage = 0,004 % (w/w) in concrete. |
31 December 2028 |
|
1805 |
|
126-73-8 |
tributyl phosphate |
Admixtures, organic additions, formwork release agents |
Defoamer |
|
|
|
Maximum dosage = 0,004 % (w/w) in concrete. |
31 December 2028 |
|
1806 |
|
141-22-0 |
ricinoleic acid |
|
|
2100 |
|
|
|
31 December 2028 |
|
1807 |
|
144-62-7 |
oxalic acid |
|
|
300 |
|
|
|
31 December 2034 |
|
1808 |
|
60-00-4 |
edetic acid (EDTA) |
|
|
|
|
|
Maximum dosage = 0,004 % (w/w) in concrete. |
31 December 2034 |
|
1809 |
|
68412-29-3 |
hydrolysed starch |
|
|
|
|
|
Maximum dosage = 0,15 % (w/w) in concrete. |
31 December 2028 |
|
1810 |
|
9000-65-1 |
tragacanth gum |
|
|
|
|
|
Maximum dosage = 0,2 % (w/w) in concrete. |
31 December 2028 |
|
1811 |
|
2478-10-6 |
4-hydroxybutylacrylate |
Organic additions |
|
|
|
|
|
31 December 2031 |
|
1812 |
|
9003-01-4 |
polyacrylic acid |
Organic additions |
|
|
|
|
|
31 December 2031 |
|
1813 |
|
9003-11-6 |
poly(ethylenepropylene)glycol |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1814 |
|
100-42-5 |
styrene |
|
|
|
|
|
|
31 December 2028 |
|
1815 |
|
1007848-63-6 |
tert-decanoic acid, ethenyl ester, polymer with ethene, ethenyl acetate and methyl 2-methyl-2-propenoate |
Organic additions |
|
|
|
|
|
31 December 2034 |
|
1816 |
|
100-97-0 |
hexamethylentetramine |
|
|
|
|
750 - expressed as formaldehyde |
|
31 December 2034 |
|
1817 |
|
102782-43-4 |
alcohols, C9-C11, branched and linear, ethoxylated propoxylated |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1818 |
|
103-11-7 |
2-ethylhexyl acrylate |
|
|
2,5 |
|
|
|
31 December 2034 |
|
1819 |
|
10378-23-1 |
mercaptoethanol |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1820 |
|
104-76-7 |
2-ethyl-1-hexanol |
Admixtures |
|
1500 |
|
|
|
31 December 2034 |
|
1821 |
|
105-59-9 |
N-methyl diethanolamine |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1822 |
|
106-91-2 |
2,3-epoxypropyl methacrylate |
|
|
1,0 |
|
|
|
31 December 2028 |
|
1823 |
|
106-99-0 |
butadiene |
|
|
0,1 |
|
|
|
31 December 2028 |
|
1824 |
|
107-13-1 |
acrylonitrile |
|
|
0,1 |
|
|
|
31 December 2028 |
|
1825 |
|
107-96-0 |
mercaptopropionic acid |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1826 |
|
108-05-4 |
acetic acid, vinyl ester |
|
|
600 |
|
|
|
31 December 2028 |
|
1827 |
|
108-31-6 |
maleic anhydride |
|
|
|
|
1500 - expressed as maleic acid. |
|
31 December 2034 |
|
1828 |
|
110-16-7 |
maleic acid |
|
|
|
|
1500 – expressed as maleic acid. |
|
31 December 2034 |
|
1829 |
|
110-63-4 |
1,4-butanediol |
|
|
250 - expressed as 1,4-butanediol. |
|
|
|
31 December 2034 |
|
1830 |
|
110-97-4 |
1,1'-iminodipropan-2-ol |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1831 |
|
111-82-0 |
methyl laurate |
|
|
|
|
|
|
31 December 2031 |
|
1832 |
|
111-90-0 |
2-(2-ethoxyethoxy)ethanol |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1833 |
|
112-27-6 |
triethyleneglycol |
|
|
|
|
|
|
31 December 2034 |
|
1834 |
|
112-30-1 |
decan-1-ol |
|
|
|
|
|
|
31 December 2034 |
|
1835 |
|
112-34-5 |
diethylene glycol monobutyl ether |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1836 |
|
112-92-5 |
octadecan-1-ol |
|
|
|
|
|
|
31 December 2031 |
|
1837 |
|
119-47-1 |
6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol |
Admixtures |
|
75 |
|
|
|
31 December 2028 |
|
1838 |
|
122-96-3 |
piperazine–1,4 -diethanol |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1839 |
|
123-31-9 |
hydroquinone |
|
|
30 |
|
|
|
31 December 2028 |
|
1840 |
|
125005-87-0 |
diutan gum |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1841 |
|
126-30-7 |
2,2-dimethyl–1,3 -propanediol |
|
|
2,5 |
|
|
|
31 December 2034 |
|
1842 |
|
126-86-3 |
2,4,7,9-tetramethyldec-5-in–4,7 -diol |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1843 |
|
128-37-0 |
2,6-di-tert-butyl-p-cresol |
Organic additions |
|
150 |
|
|
|
31 December 2034 |
|
1844 |
|
1338-41-6 |
sorbitan monostearate |
|
|
|
|
|
|
31 December 2034 |
|
1845 |
|
13463-41-7 |
zinc, bis(1-hydroxy-2(1H)-pyridinethionato-O,S)-, (T-4)- |
Organic additions |
|
0,1 |
|
For zinc, refer to Annex V. |
|
31 December 2028 |
|
1846 |
|
140-88-5 |
ethyl acrylate |
|
|
|
|
300 - expressed as acrylic acid. |
|
31 December 2034 |
|
1847 |
|
141-32-2 |
butyl acrylate |
|
|
|
|
300 - expressed as acrylic acid. |
|
31 December 2034 |
|
1848 |
|
141-78-6 |
ethyl acetate |
|
|
|
|
|
|
31 December 2034 |
|
1849 |
|
142-31-4 |
sodium octyl sulfate |
|
|
|
|
|
|
31 December 2031 |
|
1850 |
|
142-87-0 |
sodium decyl sulfate |
|
|
|
|
|
|
31 December 2031 |
|
1851 |
|
143-19-1 |
9-octadecenoic acid (9Z)-, sodium salt (1:1) |
Admixtures, organic additions, formwork release agents |
Additive for formwork release agents |
|
|
|
|
31 December 2028 |
|
1852 |
|
143-22-6 |
2-(2-(2-butoxyethoxy)ethoxy)ethanol |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1853 |
|
150413-26-6 |
poly(oxy–1,2 -ethanediyl), .alpha.-sulfo-.omega.-(isotridecyloxy)-, sodium salt (1:1) |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1854 |
|
150-76-5 |
hydroquinone methylether |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1855 |
|
15763-76-5 |
sodium p-cumenesulfonate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1856 |
|
1663-39-4 |
tert-butyl acrylate |
|
|
|
|
300 - expressed as acrylic acid. |
|
31 December 2034 |
|
1857 |
|
1879-09-0 |
2,4-dimethyl-6-tert-butyl-phenol |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1858 |
|
204336-40-3 |
oxirane, methyl-,polymer with oxirane, mono(3,5,5-trimethylhexyl) ether |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1859 |
|
2146-71-6 |
vinyl laurate (dodecanoic acid, ethenyl ester) |
Organic additions |
|
|
|
|
|
31 December 2034 |
|
1860 |
|
2373-38-8 |
butanedioic acid, sulfo-, 1,4-bis(1,3-dimethylbutyl) ester, sodium salt |
Organic additions |
|
|
|
|
|
31 December 2031 |
|
1861 |
|
2425-77-6 |
2-hexyldecan-1-ol |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1862 |
|
24800-44-0 |
tripropyleneglycol |
|
|
|
|
|
|
31 December 2034 |
|
1863 |
|
24937-78-8 |
acetic acid ethenyl ester, polymer with ethene |
Organic additions |
|
|
|
|
|
31 December 2034 |
|
1864 |
|
25190-52-7 |
polypropyleneglycol stearate |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1865 |
|
25584-83-2 |
hydroxypropyl acrylate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1866 |
|
26172-55-4 |
5-chloro-2-methyl-2H-isothiazol-3-one |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
|
1867 |
|
26221-27-2 |
poly(vinyl alcohol-co-ethylene) |
Organic additions |
|
|
|
|
|
31 December 2037 |
|
1868 |
|
26399-02-0 |
2-ethylhexyl oleate |
Organic additions |
|
|
|
|
|
31 December 2031 |
|
1869 |
|
27813-02-1 |
2-propenoic acid, 2-methyl-, monoester with 1,2-propanediol |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1870 |
|
28098-03-5 |
octanoic acid, compound with 2-aminoethanol (1:1) |
Admixtures, organic additions, formwork release agents |
Additive for formwork release agents |
|
|
|
|
31 December 2028 |
|
1871 |
|
29736-24-1 |
acetic acid, 2-hydroxy-2sulfo-, sodium salt (1:2) |
Organic additions |
|
|
|
|
|
31 December 2031 |
|
1872 |
|
353752-63-3 |
2-propenoic acid, homopolymer, ester with α-methyl-ω-hydroxypoly(oxy–1,2 -ethanediyl), graft |
Organic additions |
|
|
|
|
|
31 December 2037 |
|
1873 |
|
36653-82-4 |
hexadecan-1-ol |
|
|
|
|
|
|
31 December 2034 |
|
1874 |
|
37208-08-5 |
hydroxybutylcellulose |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1875 |
|
300-92-5 |
aluminium distearate |
|
|
|
|
For aluminium, refer to Annex V. |
|
31 December 2031 |
|
1876 |
|
4402-30-6 |
2-propanol, 1,1'-(methylimino)bis- |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1877 |
|
50-81-7 |
ascorbic acid |
|
|
|
|
|
|
31 December 2028 |
|
1878 |
|
50985-38-1 |
poly(oxy–1,2 -ethanediyl), .alpha.-(4-hydroxybutyl)-.omega.-hydroxy |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1879 |
|
513-42-8 |
2-methyl-2-propen-1-ol |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1880 |
|
51668-30-5 |
oxirane, methyl-, polymer with oxirane, octadecanoate |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1881 |
|
52383-89-8 |
dodecanoic acid, ethenyl ester, polymer with chloroethene and ethene |
Organic additions |
|
|
|
|
|
31 December 2037 |
|
1882 |
|
52668-97-0 |
oleic acid-polyethyleneglycol-diester |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1883 |
|
52933-07-0 |
phosphoric acid, isotridecyl ester |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1884 |
|
5395-50-6 |
tetrahydro-1,3,4,6-tetrakis(hydroxymethyl) imidazo[4,5-d]imidazole–2,5 (1H,3H)-dione |
Organic additions |
|
|
|
|
|
31 December 2031 |
|
1885 |
|
541-02-6 |
decamethylcyclopentasiloxane |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1886 |
|
544-63-8 |
myristic acid |
|
|
|
|
|
|
31 December 2028 |
|
1887 |
|
55406-53-6 |
3-iodo-2-propynyl butylcarbamate |
Admixtures, organic additions, formwork release agents |
Biocide |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
|
1888 |
|
556-67-2 |
octamethylcyclotetrasiloxane |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1889 |
|
557-05-1 |
zinc distearate |
|
Water repellent |
|
|
For zinc, refer to Annex V. |
|
31 December 2031 |
|
1890 |
|
5625-90-1 |
N,N'-methylenebismorpholine |
Admixtures, organic additions, formwork release agents |
Biocide |
0,1 |
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
|
1891 |
|
56-87-1 |
L-lysin |
|
|
|
|
|
|
31 December 2037 |
|
1892 |
|
595585-15-2 |
D-glucurono-D-gluco-6-deoxy-L-mannan, acetate, calcium magnesium potassium sodium salt |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1893 |
|
61791-14-8 |
amines, coco alkyl, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1894 |
|
63330-34-7 |
tert-decanoic acid, ethenyl ester, polymer with ethene and ethenyl acetate |
Organic additions |
|
|
|
|
|
31 December 2034 |
|
1895 |
|
64-17-5 |
ethanol |
|
|
|
|
|
|
31 December 2034 |
|
1896 |
|
64742-47-8 |
distillates (petroleum), hydrotreated light |
Formwork release agents |
|
|
|
|
|
31 December 2031 |
|
1897 |
|
64742-48-9 |
naphtha (petroleum), hydrotreated heavy; low boiling point hydrogen treated naphtha |
Formwork release agents |
|
0,1 |
|
|
|
31 December 2028 |
|
1898 |
|
64742-95-6 |
solvent naphtha (petroleum), light arom. |
Formwork release agents |
|
0,1 |
|
|
|
31 December 2028 |
|
1899 |
|
65997-04-8 |
rosin, fumarated |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1900 |
|
6683-19-8 |
pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate] |
|
|
|
|
|
|
31 December 2034 |
|
1901 |
|
67-56-1 |
methanol |
|
|
|
|
|
|
31 December 2034 |
|
1902 |
|
67-63-0 |
2-propanol |
|
|
|
|
|
|
31 December 2034 |
|
1903 |
|
68442-68-2 |
benzenamine, N-phenyl-, styrenated |
Organic additions |
|
|
|
|
|
31 December 2031 |
|
1904 |
|
69011-36-5 |
isotridecanol, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1905 |
|
71-36-3 |
1-butanol |
|
|
|
|
|
|
31 December 2034 |
|
1906 |
|
72121-88-1 |
D-glucopyranuronic acid, polymer with 6-deoxy-L-mannose, D-glucose and D-mannose, calcium potassium sodium salt (Welan gum) |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1907 |
|
74-85-1 |
ethene |
Admixtures |
|
|
|
|
|
31 December 2034 |
|
1908 |
|
75-21-8 |
ethylene oxide |
|
|
0,1 |
|
|
|
31 December 2028 |
|
1909 |
|
75-91-2 |
tert-butyl hydroperoxide (TBHP) |
Organic additions |
|
|
|
|
|
31 December 2028 |
|
1910 |
|
78041-14-2 |
oxirane, methyl-, polymer with oxirane, ether with 1,2,3-propanetriol (3:1), (9Z)-9-octadecenoate |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1911 |
|
78-51-3 |
tributoxyethyl phosphate |
Admixtures, organic additions, formwork release agents |
Defoamer |
|
|
|
Maximum dosage = 0,5 % (w/w) based on the addition or admixture. |
31 December 2031 |
|
1912 |
|
79-06-1 |
acrylamide |
|
|
0,1 |
|
|
|
31 December 2028 |
|
1913 |
|
79-10-7 |
acrylic acid |
|
|
|
|
300 - expressed as acrylic acid. |
|
31 December 2034 |
|
1914 |
|
79-39-0 |
methacrylamide |
|
|
0,1 |
|
|
|
31 December 2034 |
|
1915 |
|
79-41-4 |
methacrylic acid |
|
|
|
|
300 – expressed as methacrylic acid. |
|
31 December 2034 |
|
1916 |
|
8002-13-9 |
rape oil |
|
|
|
|
|
|
31 December 2028 |
|
1917 |
|
8015-86-9 |
carnauba wax |
|
|
|
|
|
|
31 December 2028 |
|
1918 |
|
8028-48-6 |
orange, sweet, extract |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1919 |
|
8028-89-5 |
caramel (color) |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1920 |
|
8042-47-5 |
white mineral oil (petroleum) |
Curing compounds |
|
|
|
|
|
31 December 2031 |
|
1921 |
|
80-62-6 |
methacrylic acid, methyl ester |
|
|
|
|
300 - expressed as methacrylic acid. |
|
31 December 2034 |
|
1922 |
|
818-61-1 |
acrylic acid, monoester with ethyleneglycol |
|
|
|
|
300 - expressed as acrylic acid. |
|
31 December 2034 |
|
1923 |
|
82973-76-0 |
poly(oxy–1,2 -ethanediyl), a,a'-(2,2-dimethyl–1,3 -propanediyl)bis[w-hydroxy- |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1924 |
|
868-18-8 |
sodium tartrate |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1925 |
|
868-77-9 |
2-hydroxyethyl methacrylate |
|
|
|
|
300 - expressed as methacrylic acid. |
|
31 December 2034 |
|
1926 |
|
9003-20-7 |
acetic acid ethenyl ester, homopolymer |
Organic additions |
|
|
|
|
|
31 December 2037 |
|
1927 |
|
9003-39-8 |
polyvinylpyrrolidone |
|
|
|
|
|
|
31 December 2037 |
|
1928 |
|
9004-58-4 |
cellulose, ethyl 2-hydroxyethyl ether |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1929 |
|
9004-64-2 |
cellulose, 2-hydroxypropyl ether |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1930 |
|
9004-74-4 |
poly(oxy–1,2 -ethanediyl), α-methyl-ω-hydroxy- |
Admixtures |
|
|
|
|
|
31 December 2037 |
|
1931 |
|
9004-82-4 |
sodium lauryl ether sulfate |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1932 |
|
9005-00-10 |
stearyl alcohol, ethoxylate (2 EO) |
Admixtures |
|
|
|
|
|
31 December 2031 |
|
1933 |
|
9005-65-6 |
polyethyleneglycol sorbitan monooleate |
|
|
|
|
|
|
31 December 2028 |
|
1934 |
|
9032-46-6 |
cellulose, 2-sulfoethyl ether |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1935 |
|
9036-19-5 |
(1,1,3,3-tetramethylbutyl)-phenyl-polyethylenglycol |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1936 |
|
9043-30-5 |
isotridecanol, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1937 |
|
923-02-4 |
N-(hydroxymethyl)methacrylamide |
|
|
2,5 |
|
|
|
31 December 2034 |
|
1938 |
|
925-60-0 |
acrylic acid, propylester |
|
|
|
|
300 - expressed as acrylic acid. |
|
31 December 2028 |
|
1939 |
|
96-33-3 |
acrylic acid, methyl ester |
|
|
|
|
300 - expressed as acrylic acid. |
|
31 December 2034 |
|
1940 |
|
97-65-4 |
itaconic acid |
|
|
|
|
|
|
31 December 2034 |
|
1941 |
|
999-61-1 |
2-hydroxypropyl acrylate |
|
|
2,5 - expressed as the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxy-isopropyl ester. |
|
|
|
31 December 2028 |
|
1942 |
|
|
acetic acid ethenyl ester, polymer with ethene, sodium 2-methyl-2-[(1-oxo-2-propen-1-yl)amino]-1- propanesulfonate and ethenyl tert-decanoate |
Organic additions |
|
|
|
|
|
31 December 2034 |
|
1943 |
|
|
acrylic acid and methacrylic acid ester of dihydric aliphatic alcohols with chain length C2-C18 |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1944 |
|
|
fatty alcohol ethoxylate |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1945 |
|
|
polyethylenglycol ether (EO = 1-50) of linear and branched primary alcohols |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1946 |
|
|
vinyl ether of monohydric aliphatic saturated alcohols with chain length C1-C18 |
Admixtures |
|
|
|
|
|
31 December 2028 |
|
1947 |
|
|
isothiazolinone |
Admixtures, organic additions, formwork release agents |
Preservative |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2028 |
Table 3
European positive lists of groups of organic constituents for cementitious materials
|
EUPL Number |
EC Number |
CAS Number |
Organic cementitious constituent name group name |
Generic constituent category |
Technical function |
Maximum Tolerable Concentration at the tap (MTCtap, cementitious) (μg/l) |
Total Maximum Tolerable Concentration at the tap (MTC(T)tap, cementitious) in μg/l (A) |
Conditions of use |
Expiry date |
|||||||||||
|
Value for the organic cementitious constituent |
Values for other relevant chemical species |
|||||||||||||||||||
|
1948 |
|
68439-45-2 |
alcohols, C6-C12, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1949 |
|
68439-50-9 |
alcohols, C12-C14, ethoxylated |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1950 |
|
68551-12-2 |
alcohols, C12-C16, ethoxylated |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1951 |
|
96130-61-9 |
alcohols, C9-C11 ethoxylated sulfates, sodium salts |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1952 |
|
68585-34-2 |
alcohols, C10-C16, ethoxylated, sulfates, sodium salts |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1953 |
|
68891-38-3 |
alcohols, C12-C14, ethoxylated, sulfates, sodium salts |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1954 |
|
126950-60-5 |
alcohols, C12-C14, secondary |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1955 |
|
84133-50-6 |
alcohols, C12-C14, secondary ethoxylated |
Admixtures |
|
250 |
|
|
|
31 December 2031 |
||||||||||
|
1956 |
|
68439-57-6 |
alkene (sulfonic acid, C14-C16-alkane hydroxy & C14-C16-alkene sodium salts) |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1957 |
|
25155-30-0 |
alkyl aryl sulfonate (sodium dodecylbenzenesulfonate) |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1958 |
|
85117-50-6 |
alkyl benzene sulfonate, sodium (mono C10-C14-alkyl derivatives sodium) |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1959 |
|
70592-80-2 & 1643-20-5 |
alkyl dimethylamine oxide |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1960 |
|
68585-47-7 |
alkyl sulfate, sodium (mono C10-C16-alkyl esters) |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1961 |
|
68411-30-3 |
alkylaryl sulfonate (benzenesulfonic acid, C10-C13 derivs, sodium) |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1962 |
|
68154-99-4 |
alkylpolyethoxypolypropoxy benzylether |
Admixtures |
|
|
|
|
|
31 December 2034 |
||||||||||
|
1963 |
|
7360-53-4 |
aluminium formate |
Admixtures |
|
|
|
For aluminium, refer to Annex V. |
|
31 December 2031 |
||||||||||
|
1964 |
|
61788-90-7 |
amines, coco alkyldimethyl, N-oxides |
Admixtures |
|
0,1 - expressed as amines |
|
|
|
31 December 2031 |
||||||||||
|
1965 |
|
72906-11-7 |
alkyl sulfate sodium (mono C9-C13 alkyl esters) |
Admixtures |
|
300 |
|
|
|
31 December 2031 |
||||||||||
|
1966 |
|
68784-08-7 |
butanedioic acid, sulfo-, C-(2-coco amidoethyl) esters, disodium salts |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1967 |
|
68603-42-9 |
coconut diethanolamide (coco N,N-bis hydroxyethyl) |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1968 |
|
84712-53-8 |
N-coco sulfosuccinamate, disodium (butanoic acid,4-amino-4-oxy-2-sulfo-,N-coco alkyl derivs) |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1969 |
|
67762-90-7 |
dimethyl siloxane reaction products with silica |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1970 |
|
67701-03-5 |
fatty acids, C16-C18 (stearic acid) |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1971 |
|
61791-08-0 |
fatty acids, coco, reaction products with ethanolamine, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1972 |
|
50-99-7 |
glucose |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1973 |
|
50-21-5 |
lactic acid |
Admixtures |
|
|
|
|
|
31 December 2034 |
||||||||||
|
1974 |
|
91078-68-1 |
naphthalenesulfonic acids, reaction products with formaldehyde, sodium salts |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1975 |
|
68002-63-1 |
quaternary ammonium, C14-C18, alkyltrimethyl chlorides |
Admixtures |
|
300 |
|
For ammonium, refer to Annex V. |
|
31 December 2031 |
||||||||||
|
1976 |
|
61789-40-0 |
quaternary ammonium compounds, (carboxymethyl)(3-cocoamidopropyl)dimethyl-hydroxides, inner salts |
Admixtures |
|
300 |
|
For ammonium, refer to Annex V. |
|
31 December 2031 |
||||||||||
|
1977 |
|
73138-82-6, 61790-51-0 |
resin acids and rosin acids |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1978 |
|
8050-09-7 |
rosin |
Admixtures |
|
|
|
|
|
31 December 2034 |
||||||||||
|
1979 |
|
91648-56-5 |
sodium dodecyl to pentadecyl ether sulfonates |
Admixtures |
|
1500 |
|
|
|
31 December 2031 |
||||||||||
|
1980 |
|
25322-68-3 |
polyethylene glycol |
|
|
|
|
|
|
31 December 2034 |
||||||||||
|
1981 |
|
57-55-6 |
propane–1,2 -diol (1,2 propylene glycol) |
|
|
|
|
|
|
31 December 2034 |
||||||||||
|
1982 |
|
75-56-9 |
propylene oxide |
|
|
0,1 |
|
|
|
31 December 2028 |
||||||||||
|
1983 |
|
107-22-2 |
glyoxal |
|
|
|
|
|
|
31 December 2028 |
||||||||||
|
1984 |
|
1000817-22-0 |
fatty acids, C8-C18 and C18-unsatd., reaction products with diethanolamine and propylene oxide |
Admixtures, organic additions, formwork release agents |
Additive for formwork release agents |
|
|
|
|
31 December 2031 |
||||||||||
|
1985 |
|
103818-93-5 |
alcohols, C9-C11, ethoxylated propoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1986 |
|
1400790-00-2 |
alcohols, C9-C11-branched, ethoxylated propoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1987 |
|
169107-21-5 |
alcohols, C9-C11-branched, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1988 |
|
25085-46-5 |
acetic acid ethenyl ester, polymer with chloroethene and ethene |
Organic additions |
|
|
|
|
|
31 December 2037 |
||||||||||
|
1989 |
|
25213-24-5 |
acetic acid ethenyl ester, polymer with ethenol |
Admixtures |
|
|
|
|
MW > 1 000 Da. |
31 December 2034 |
||||||||||
|
1990 |
|
25265-71-8 |
1,1'-oxydi-2-propanol, mixture of isomers |
Organic additions |
|
|
|
|
|
31 December 2034 |
||||||||||
|
1991 |
|
4080-31-3 |
3,5,7-triaza-1-azoniatricyclo[3.3.1.13,7]decane,1-(3-chloro-2-propenyl)-, chloride |
|
|
15 |
|
|
|
31 December 2031 |
||||||||||
|
1992 |
|
63148-62-9 |
polydimethylsiloxane |
Admixtures, organic additions, formwork release agents |
Defoamer |
|
|
|
Maximum dosage = 0,5 % (w/w) based on the addition or admixture. |
31 December 2034 |
||||||||||
|
1993 |
|
64742-52-5 |
distillates (petroleum), hydrotreated heavy naphthenic; base oil — unspecified |
Formwork release agents |
|
0,1 |
|
|
|
31 December 2028 |
||||||||||
|
1994 |
|
64742-53-6 |
distillates (petroleum), hydrotreated light naphthenic; base oil — unspecified |
Formwork release agents |
|
0,1 |
|
|
|
31 December 2028 |
||||||||||
|
1995 |
|
64742-55-8 |
distillates (petroleum), hydrotreated light paraffinic |
Curing compounds |
|
0,1 |
|
|
|
31 December 2028 |
||||||||||
|
1996 |
|
64742-56-9 |
distillates (petroleum), solvent-dewaxed light paraffinic; base oil — unspecified |
Formwork release agents |
|
0,1 |
|
|
|
31 December 2028 |
||||||||||
|
1997 |
|
66455-15-0 |
alcohol, C10-C14, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
1998 |
|
67701-01-3 |
fatty acid, C12-C18 |
|
|
|
|
|
|
31 December 2031 |
||||||||||
|
1999 |
|
67701-05-7 |
fatty acid, C16-C18 and C18-unsaturated |
Admixtures, organic additions, formwork release agents |
Additive for formwork release agents |
|
|
|
|
31 December 2031 |
||||||||||
|
2000 |
|
67701-08-0 |
fatty acids, C8-C18 and C18-unsaturated |
Admixtures, organic additions, formwork release agents |
Additive for formwork release agents |
|
|
|
|
31 December 2031 |
||||||||||
|
2001 |
|
67701-26-2 |
glycerides, C12-C18 (triglycerides C12-C18 (even numbered)) |
Admixtures, organic additions, formwork release agents |
Additive for formwork release agents |
|
|
|
|
31 December 2031 |
||||||||||
|
2002 |
|
68131-39-5 |
alcohols, C12-C15, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2003 |
|
68131-40-8 |
alcohols, C11-C15-secondary, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2004 |
|
68154-97-2 |
alcohols, C10-C12, ethoxylated propoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2005 |
|
68439-46-3 |
alcohols, C9-C11, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2006 |
|
68439-49-6 |
polyethyleneglycol (EO = 1-50) ethers of linear and branched primary (C8-C22) alcohols |
|
|
|
|
|
|
31 December 2034 |
||||||||||
|
2007 |
|
68476-78-8 |
molasses |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2008 |
|
68526-86-3 |
alcohols, C11-C14-Iso |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2009 |
|
68551-07-5 |
alcohols, C8-C18 |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2010 |
|
68611-44-9 |
silane, dichlorodimethyl-, reaction products with silica |
|
|
|
|
|
|
31 December 2031 |
||||||||||
|
2011 |
|
68920-66-1 |
alcohols, C16-C18 and C18-unsatd., ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2012 |
|
68954-91-6 |
poly(oxy–1,2 -ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-hydroxy-, C10-C12-alkyl ethers, disodium salts |
Admixtures |
|
|
|
|
|
31 December 2037 |
||||||||||
|
2013 |
|
69013-18-9 |
alcohols, C8-C18, ethoxylated propoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2014 |
|
69227-21-0 |
alcohols, C12-C18, ethoxylated propoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2015 |
|
70955-07-6 |
alcohols, tallow, propoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2016 |
|
71786-60-2 |
ethanol, 2,2'-iminobis-, N-C12-C18-alkyl derivs. |
Admixtures, organic additions, formwork release agents |
Additive for formwork release agents |
|
|
|
|
31 December 2031 |
||||||||||
|
2017 |
|
78330-21-9 |
alcohols, C11-C14-iso-, C13-rich, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2018 |
|
8002-74-2 |
paraffin waxes and hydrocarbon waxes |
Organic additions |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2019 |
|
85409-27-4 |
resin acid |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2020 |
|
85586-25-0 |
rapeseed oil methyl ester |
|
|
|
|
|
|
31 December 2031 |
||||||||||
|
2021 |
|
93-83-4 |
N,N-bis(2-hydroxyethyl)oleamide |
Admixtures, organic additions, formwork release agents |
Additive for formwork release agents |
|
|
|
|
31 December 2031 |
||||||||||
|
2022 |
|
97043-91-9 |
alcohols, C9-C16, ethoxylated |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
rapidmeent |
|
|
fatty acid polyglycol esters |
|
|
|
|
|
|
31 December 2034 |
||||||||||
|
2024 |
|
|
methallylsulfonic acid, salts |
|
|
0,25 |
|
|
|
31 December 2031 |
||||||||||
|
2025 |
|
|
polycarboxylate ether made of a combination of the following
|
Admixtures |
|
|
poly(oxy–1,2 -ethanediyl), α-(3-methyl-3-buten-1-yl)-ω-hydroxy- (CAS No. 110412-77-6) MTCtap = 1 μg/l isoprenol MTCtap = 2,5 μg/l |
|
Oligomers < 1000 Da < 1 %; residual contents of acrylic acid < 0,05 %; hydroxypropyl acrylate (CAS No. 25584-83-2) < 0,0025 %; ethylene oxide (CAS No.75-21-8) < 0,0005 %. |
31 December 2034 |
||||||||||
|
2026 |
|
|
melamine sulfonates |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2027 |
|
|
naphthalene sulfonates |
Admixtures |
|
|
|
|
|
31 December 2031 |
||||||||||
|
2028 |
|
|
substances releasing formaldehyde |
Admixtures, organic additions, formwork release agents |
Preservative |
|
|
|
Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. |
31 December 2031 |
||||||||||
Notes:
1. Note 1: Explanation of the notes in Tables 2 and 3
|
i. |
The meaning of the notes provided in Tables 2 and 3 is as follows:
|
2. Note 2: Scope of an authorisation
|
i. |
Where an organic cementitious constituent appearing on the list as an individual entry is also covered by a group entry, the conditions of use and specifications and expiry dates applying to this organic cementitious constituent shall be those indicated in the individual entry exclusively. |
|
ii. |
Where a organic cementitious constituent appears on the list as its anhydrous form, its approval shall be considered to covers its hydrated form. |
|
iii. |
Unless stated otherwise in Tables 2 and 3, the following salts of authorised acids, phenols and alcohols shall be considered covered by that authorisation: aluminium, ammonium, barium, calcium, cobalt, copper, europium, gadolinium, iron, lanthanum lithium, magnesium, manganese, potassium, sodium, terbium, and zinc. This is subject to compliance with the corresponding MTCtap, cementitious value for the element or ion which is the same as shown in Annex V for cementitious materials. In certain cases, where the safety assessment indicates concerns on the use of the free acids, only the salts should be authorised by indicating in the list the name as ‘… acid(s), salts’. |
|
iv. |
For the purposes of the first European positive list of organic cementitious constituents, polymers used as constituents of admixtures which are exclusively manufactured with authorised monomers shall be considered covered by those authorisations. |
|
v. |
After the first European positive list of organic cementitious constituents, in the case of polymer, the entry in the European positive list shall be for the monomer(s) and other reactant(s) used in the polymer, and polymers manufactured from authorised monomer(s) and other reactant(s) shall be considered to be covered by these entries. |
|
vi. |
In the case of polymers used as constituents of fibres or additives, points v to viii of Section 2 of Annex I shall apply mutatis mutandi. |
|
vii. |
Fibres made of metallic compositions approved on the European positive list for metallic materials, are also authorised for use in cementitious materials. |
|
viii. |
An entry in Table 1 covers a nanoform only when it is explicitly stated in the approval of that entry. |
3. Note 3: Additional conditions of use
|
i. |
Only biocidal active substances of Product-type 6 (Preservatives for products during storage) in accordance with Regulation (EU) No 528/2012 may be used as organic cementitious constituents. |
ANNEX IV
EUROPEAN POSITIVE LIST OF COMPOSITIONS OF ENAMELS, CERAMIC AND OTHER INORGANIC MATERIALS
Table 1
European positive lists of compositions of enamels, ceramics and other inorganic materials
|
EUPL Number |
Material category |
Material sub-category |
Accepted composition |
Accepted inorganic composition constituents |
Relevant chemical species to be analysed in the migration waters (A) |
Maximum Tolerable Concentration at the tap for relevant chemical species (MTCtap, inorganic) in μg/l (A) |
Conditions of use |
Expiry date |
||
|
Constituent identity |
Minimum concentration (% w/w) |
Maximum concentration (% w/w) |
||||||||
|
2029 |
Enamel |
Enamel |
Enamel |
SiO2 |
25 |
80 |
Al, B, Ba, Cd, Ce, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Sb, Sr, Ti, Zr |
For elements, refer to Annex V. |
|
31 December 2031 |
|
B2O3 |
0 |
20 |
||||||||
|
Na2O |
0 |
30 |
||||||||
|
K2O |
0 |
10 |
||||||||
|
Li2O |
0 |
10 |
||||||||
|
CaO |
0 |
10 |
||||||||
|
BaO |
0 |
15 |
||||||||
|
SrO |
0 |
5,0 |
||||||||
|
Sb2O3 |
0 |
1,0 |
||||||||
|
MgO |
0 |
5,0 |
||||||||
|
CeO2 |
0 |
15 |
||||||||
|
ZnO |
0 |
10 |
||||||||
|
Al2O3 |
0 |
5,0 |
||||||||
|
CoO |
0 |
5,0 |
||||||||
|
NiO |
0 |
3,0 |
||||||||
|
CuO |
0 |
3,0 |
||||||||
|
MnO2 |
0 |
5,0 |
||||||||
|
Fe2O3 |
0 |
5,0 |
||||||||
|
MoO3 |
0 |
5,0 |
||||||||
|
P2O5 |
0 |
5,0 |
||||||||
|
SnO2 |
0 |
5,0 |
||||||||
|
TiO2 |
0 |
16 |
||||||||
|
ZrO2 |
0 |
30 |
||||||||
|
F |
0 |
10 |
||||||||
|
Cr2O3 |
0 |
3,0 |
||||||||
|
2030 |
Enamel |
Glasses |
Borosilicate glass |
SiO2 |
80 |
100 |
Al, B, Cd, Pb |
For elements, refer to Annex V. |
|
31 December 2031 |
|
B2O3 |
7,0 |
13 |
||||||||
|
Al2O3 |
0 |
2,4 |
||||||||
|
Na2O |
0 |
2,0 |
||||||||
|
K2O |
0 |
2,0 |
||||||||
|
2031 |
Enamel |
Glasses |
Soda-lime glass |
SiO2 |
60 |
85 |
Al, B, Ba, Cd, Ce, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Sr, Ti, Zr |
For elements, refer to Annex V. |
|
31 December 2031 |
|
B2O3 |
0 |
15 |
||||||||
|
Al2O3 |
0 |
10,0 |
||||||||
|
Na2O |
0 |
15 |
||||||||
|
K2O |
0 |
5,0 |
||||||||
|
CaO |
0 |
15 |
||||||||
|
MgO |
0 |
5,0 |
||||||||
|
BaO |
0 |
5,0 |
||||||||
|
SrO |
0 |
1,0 |
||||||||
|
Sb2O3 |
0 |
1,0 |
||||||||
|
CeO2 |
0 |
1,0 |
||||||||
|
CoO |
0 |
1,0 |
||||||||
|
NiO |
0 |
1,0 |
||||||||
|
CuO |
0 |
1,0 |
||||||||
|
MnO2 |
0 |
1,0 |
||||||||
|
Fe2O3 |
0 |
1,0 |
||||||||
|
MoO3 |
0 |
1,0 |
||||||||
|
SnO2 |
0 |
1,0 |
||||||||
|
TiO2 |
0 |
1,0 |
||||||||
|
ZrO2 |
0 |
1,0 |
||||||||
|
Cr2O3 |
0 |
1,0 |
||||||||
|
2032 |
Ceramics |
Oxide ceramics |
Al2O3 and SiO2 ceramics |
Al2O3 |
0 |
99,99 |
Al, B, Ba, Cd, Cr, Mn, Pb, Sr, Ti, Y, Zr |
For elements, refer to Annex V. |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. |
31 December 2031 |
|
SiO2 |
0 |
92 |
||||||||
|
B2O3 |
0 |
2,0 |
||||||||
|
BaO |
0 |
0,2 |
||||||||
|
CaO |
0 |
8,0 |
||||||||
|
Cr2O3 |
0 |
2,0 |
||||||||
|
Fe2O3 |
0 |
4,0 |
||||||||
|
K2O |
0 |
3,0 |
||||||||
|
MgO |
0 |
3,0 |
||||||||
|
MnO2 |
0 |
3,5 |
||||||||
|
Na2O |
0 |
3,0 |
||||||||
|
P2O5 |
0 |
0,1 |
||||||||
|
SrO |
0 |
0,5 |
||||||||
|
TiO2 |
0 |
2,5 |
||||||||
|
ZrO2 |
0 |
3,0 |
||||||||
|
Y2O3 |
0 |
0,4 |
||||||||
|
2033 |
Ceramics |
Oxide ceramics |
ZrO2 ceramics |
Al2O3 |
0 |
95 |
Al, Cd, Hf, Pb, Pr, Ti, Y, Zr |
For elements, refer to Annex V. |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. |
31 December 2031 |
|
ZrO2 |
5,0 |
99 |
||||||||
|
HfO2 |
0 |
2,0 |
||||||||
|
MgO |
0 |
4,0 |
||||||||
|
CaO |
0 |
0,1 |
||||||||
|
Fe2O3 |
0 |
0,1 |
||||||||
|
SiO2 |
0 |
5,0 |
||||||||
|
TiO2 |
0 |
0,5 |
||||||||
|
Y2O3 |
0 |
8,5 |
||||||||
|
Pr2O3 |
0 |
0,2 |
||||||||
|
Na2O |
0 |
0,1 |
||||||||
|
K2O |
0 |
0,1 |
||||||||
|
2034 |
Ceramics |
Oxide ceramics |
Hard ferrite ceramics |
FeO/Fe2O3 |
80 |
95 |
Al, Ba, Bi, Cd, Cr, Cu, Mn, Ni, Pb, Sr |
For elements, refer to Annex V. |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. |
31 December 2031 |
|
Al2O3 |
0 |
3,0 |
||||||||
|
BaO |
0 |
12 |
||||||||
|
CaO |
0 |
3,0 |
||||||||
|
Cr2O3 |
0 |
0,1 |
||||||||
|
Bi2O3 |
0 |
0,4 |
||||||||
|
MnO |
0 |
3,0 |
||||||||
|
NiO |
0 |
0,1 |
||||||||
|
P2O5 |
0 |
0,1 |
||||||||
|
SiO2 |
0 |
5,0 |
||||||||
|
SrO |
0 |
12 |
||||||||
|
MgO |
0 |
0,1 |
||||||||
|
Na2O |
0 |
0,1 |
||||||||
|
ZnO |
0 |
0,1 |
||||||||
|
CuO |
0 |
0,1 |
||||||||
|
2035 |
Ceramics |
Non-oxide ceramics |
Silicon carbide (SiC) ceramics |
SiC |
78 |
100 |
Al, B, Cd, Ni, Pb, Ti, Y, Zr Benzo-(a)-pyrene Sum of 4 PAHs:Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene |
For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. |
31 December 2031 |
|
Si |
0 |
22 |
||||||||
|
Al |
0 |
2,0 |
||||||||
|
Al2O3 |
0 |
5,0 |
||||||||
|
B |
0 |
3,0 |
||||||||
|
C |
0 |
5,0 |
||||||||
|
Ca |
0 |
0,1 |
||||||||
|
Fe |
0 |
0,2 |
||||||||
|
Fe2O3 |
0 |
3,0 |
||||||||
|
Na |
0 |
0,1 |
||||||||
|
Ni |
0 |
0,1 |
||||||||
|
SiO2 |
0 |
3,0 |
||||||||
|
Ti |
0 |
0,2 |
||||||||
|
Y2O3 |
0 |
3,0 |
||||||||
|
ZrB2 |
0 |
11 |
||||||||
|
MgO |
0 |
0,1 |
||||||||
|
2036 |
Ceramics |
Non-oxide ceramics |
Silicon carbide with free carbon (SISIC-C) ceramics |
SiC |
55 |
90 |
Al, B, Cd, Ni, Pb, Ti Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene |
For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. |
31 December 2031 |
|
C |
5,0 |
40 |
||||||||
|
Al |
0 |
0,2 |
||||||||
|
B |
0 |
0,5 |
||||||||
|
Ca |
0 |
0,1 |
||||||||
|
Fe |
0 |
0,2 |
||||||||
|
Ni |
0 |
0,1 |
||||||||
|
Si |
2,0 |
15 |
||||||||
|
SiO2 |
0 |
2,5 |
||||||||
|
Ti |
0 |
0,2 |
||||||||
|
2037 |
Ceramics |
Non-oxide ceramics |
Tungsten carbide (WC) ceramics |
WC |
90 |
100 |
Cd, Cr, Mo, Ni, Pb, W Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene |
For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. |
31 December 2031 |
|
Cr3C2 |
0 |
1,0 |
||||||||
|
Mo |
0 |
1,0 |
||||||||
|
Ni |
0 |
8,0 |
||||||||
|
2038 |
Ceramics |
Non-oxide ceramics |
Silicon nitride (SN) ceramics |
Si3N4 |
78 |
97 |
Al, Cd, La, Pb, Ti, Y, Zr |
For elements, refer to Annex V. |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. |
31 December 2031 |
|
Al2O3 |
0 |
7,0 |
||||||||
|
CaO |
0 |
2,0 |
||||||||
|
Fe2O3 |
0 |
1,0 |
||||||||
|
La2O3 |
0 |
6,0 |
||||||||
|
MgO |
0 |
4,0 |
||||||||
|
SiO2 |
0 |
7,0 |
||||||||
|
TiO2 |
0 |
5,0 |
||||||||
|
Y2O3 |
0 |
3,0 |
||||||||
|
ZrO2 |
0 |
3,0 |
||||||||
|
2039 |
Ceramics |
Ceramic materials made of carbon |
Graphites |
No specific composition requirements. The starting materials include lignite, coal or petrol coke, which are mixed with a binding agent such as tar or a plastic resin, and then annealed at 600 °C to 1 000 °C. This produces carbon graphites, which are used for applications such as slide bearings, sealing rings or pump components. In another optional manufacturing step, the graphitisation, these carbon graphites are annealed once again at up to 3 000 °C. This causes the individual graphite crystals to enlarge, causing an increase in density. Contaminants are burned off to improve purity. |
Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene |
For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. First annealing at 600 °C to 1 000 °C; second annealing at up to 3 000 °C. For graphites that have been impregnated with an organic resin, the resin should be assessed separately based on the coating guideline. |
31 December 2031 |
||
|
2040 |
Ceramics |
Ceramic materials made of carbon |
Amorphous carbon layer |
No specific composition requirements. These coatings may be produced using a number of different methods. This leads to the formation of crystalline layers of graphite and diamond. |
Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene |
For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. |
31 December 2031 |
||
|
2041 |
Ceramics |
Ceramic materials made of carbon |
Carbon fibres |
No specific composition requirements. These fibres are made of organic fibres, such as viscose or polyacrylonitrile fibres, that are transformed into carbon by pyrolysis. |
Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene |
For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 |
Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. |
31 December 2031 |
||
|
2042 |
Other inorganic materials |
Mixed metal oxides |
Mixed metal oxides (MMO) coatings of iridium oxide and tantalum oxide |
IrO2 |
50 |
85 |
No migration tests required for Ir or Ta. |
|
Used as coatings of titanium anodes. Maximum layer thickness: 20 μm. |
31 December 2031 |
|
Ta2O5 |
15 |
50 |
||||||||
Notes:
1. Note 1: Explanation of the notes in Table 1
The meaning of the note provided in Table 1 is as follows:
|
2. Note 2: Additional conditions of use
For the purposes of this positive list, for elements of relevance in the migration water corresponding MTCtap, inorganics values shown in Annex V for enamels, ceramic and other inorganic materials shall apply
ANNEX V
MTCTAP FOR METALS OF RELEVANCE IN THE MIGRATION WATER
The following is provided for information purposes only:
|
(a) |
Reference value; |
|
(b) |
Allocation factor; |
|
(c) |
MTCtap for metallic materials. |
Table 1
MTCtap for metals for the specific material types
|
Metal |
Reference value |
Organic materials |
Metallic materials |
Cementitious materials |
Enamels, ceramic and other inorganic materials |
|||||
|
MTCtap, organics [μg/l] |
Allocation factor |
MTCtap, metallic [μg/l] |
Allocation factor |
MTCtap, cementitious [μg/l] |
Allocation factor |
MTCtap, inorganic [μg/l] |
Allocation factor |
|||
|
Aluminium |
Al |
Parametric value in Part C, Annex I of Directive (EU) 2020/2184 |
20 |
10% |
100 |
50% |
30 |
15% |
100 |
50% |
|
Ammonium |
NH4 + |
Parametric value in Part C, Annex I of Directive (EU) 2020/2184 |
50 |
10% |
|
|
50 |
10% |
|
|
|
Antimony |
Sb |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184 |
1,0 |
10% |
5,0 |
50% |
1,0 |
10% |
1,0 |
10% |
|
Arsenic |
As |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184 |
|
|
5,0 |
50% |
1,0 |
10% |
|
|
|
Barium |
Ba |
Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 |
50 |
10% |
|
|
50 |
10% |
50 |
10% |
|
Bismuth |
Bi |
Not available |
|
|
Not available |
|
|
|
Not available |
|
|
Boron |
B |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184 |
150 |
10% |
|
|
150 |
10% |
150 |
10% |
|
Cadmium |
Cd |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184 |
|
|
2,5 |
50% |
0,5 |
10% |
0,25 |
5% |
|
Calcium |
Ca |
Not applicable |
|
|
|
|
|
|
|
|
|
Cerium |
Ce |
Not available |
|
|
|
|
Not available |
|
Not available |
|
|
Chromium |
Cr |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184, until 12 January 2036 |
5,0 |
10% |
25 |
50% |
5,0 |
10% |
5,0 |
10% |
|
Parametric value in Part B, Annex I of Directive (EU) 2020/2184, after 12 January 2036 |
2,5 |
10% |
13 |
50% |
2,5 |
10% |
2,5 |
10% |
||
|
Cobalt |
Co |
Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 |
2,5 |
10% |
|
|
2,5 |
10% |
13 |
50% |
|
Copper |
Cu |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184 |
200 |
10% |
1800 |
90% |
200 |
10% |
200 |
10% |
|
Europium |
Eu |
Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 |
2,5 |
10% |
|
|
2,5 |
10% |
|
|
|
Fluoride |
F- |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184 |
150 |
10% |
|
|
150 |
10% |
|
|
|
Gadolinium |
Ga |
Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 |
2,5 |
10% |
|
|
2,5 |
10% |
|
|
|
Hafnium |
Hf |
Not available |
|
|
|
|
|
|
Not available |
|
|
Iron |
Fe |
Parametric value in Part C, Annex I of Directive (EU) 2020/2184 |
20 |
10% |
100 |
50% |
20 |
10% |
20 |
10% |
|
Lanthanum |
La |
Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 |
2,5 |
10% |
|
|
2,5 |
10% |
13 |
50% |
|
Lead |
Pb |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184 |
|
|
2,5 |
50% |
0,5 |
10% |
0,25 |
5% |
|
Lithium |
Li |
Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 |
30 |
10% |
|
|
30 |
10% |
30 |
10% |
|
Magnesium |
Mg |
Not applicable |
|
|
|
|
|
|
|
|
|
Manganese |
Mn |
Parametric value in Part C, Annex I of Directive (EU) 2020/2184 |
5,0 |
10% |
25 |
50% |
5,0 |
10% |
25 |
50% |
|
Molybdenum |
Mo |
Not available |
|
|
Not available |
|
|
|
Not available |
|
|
Nickel |
Ni |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184 |
|
|
10 |
50% |
2,0 |
10% |
2,0 |
10% |
|
Potassium |
K |
Not applicable |
|
|
|
|
|
|
|
|
|
Praseodymium |
Pr |
Not available |
|
|
|
|
|
|
Not available |
|
|
Selenium |
Se |
Parametric value in Part B, Annex I of Directive (EU) 2020/2184 |
|
|
10 |
50% |
|
|
|
|
|
Sodium |
Na |
Not applicable |
|
|
|
|
|
|
|
|
|
Strontium |
Sr |
Not available |
|
|
|
|
|
|
Not available |
|
|
Terbium |
Tb |
Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 |
2,5 |
10% |
|
|
|
|
|
|
|
Tin |
Sn |
Not available |
|
|
|
|
|
|
|
|
|
Titanium |
Ti |
Not available |
|
|
Not available |
|
|
|
Not available |
|
|
Tungsten |
W |
Specific Migration Limit (SML) for entry FCM substance No. 1064 set out in Annex I of Commission Regulation (EU) No 10/2011 |
2,5 |
10% |
|
|
2,5 |
10% |
2,5 |
10% |
|
Vanadium |
V |
Not available |
Not available |
|
|
|
|
|
|
|
|
Yttrium |
Y |
Not available |
|
|
|
|
|
|
Not available |
|
|
Zinc |
Zn |
Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 |
250 |
10% |
2250 |
90% |
250 |
10% |
|
|
|
Zirconium |
Zr |
Not available |
Not available |
|
|
|
|
|
Not available |
|
Notes:
‘Not applicable’ means that the metal is not hazardous and no MTCtap applies.
ELI: http://data.europa.eu/eli/dec_impl/2024/367/oj
ISSN 1977-0677 (electronic edition)